Numerical Simulation of Oxy-coal Combustion for a Swirl Burner with EDC Model

doi:10.1016/S1004-9541(14)60032-X

Chinese Journal of Chemical Engineering ›› 2014, Vol. 22 ›› Issue (2): 193-201.DOI: 10.1016/S1004-9541(14)60032-X

• 能源、资源与环境技术 • 上一篇下一篇

Numerical Simulation of Oxy-coal Combustion for a Swirl Burner with EDC Model

崔凯, 刘冰, 吴玉新, 杨海瑞, 吕俊复, 张海

Key Laboratory for Thermal Science and Power Engineering of Ministry Education, Department of Thermal Engi-neering, Tsinghua University, Beijing 100084, China

收稿日期:2012-03-26 修回日期:2013-03-04 出版日期:2014-02-05 发布日期:2014-01-28
通讯作者: ZHANG Hai
基金资助:
Supported by the Chinese Ministry of Science and Technology Project (2011DFA60390) and The National High Technology Research and Development Program of China (2007AA05Z303).

Numerical Simulation of Oxy-coal Combustion for a Swirl Burner with EDC Model

CUI Kai, LIU Bing, WU Yuxin, YANG Hairui, LÜ Junfu, ZHANG Hai

Key Laboratory for Thermal Science and Power Engineering of Ministry Education, Department of Thermal Engi-neering, Tsinghua University, Beijing 100084, China

Received:2012-03-26 Revised:2013-03-04 Online:2014-02-05 Published:2014-01-28
Contact: ZHANG Hai
Supported by:
Supported by the Chinese Ministry of Science and Technology Project (2011DFA60390) and The National High Technology Research and Development Program of China (2007AA05Z303).

摘要/Abstract

摘要： The characteristics of oxy-coal combustion for a swirl burner with a specially designed preheating chamber are studied numerically. In order to increase the accuracy in the prediction of flame temperature and ignition position, eddy dissipation concept (EDC) model with a skeletal chemical reaction mechanism was adopted to describe the combustion of volatile matter. Simulation was conducted under six oxidant stream conditions with different O₂/N₂/CO₂ molar ratios: 21/79/0, 30/70/0, 50/50/0, 21/0/79, 30/0/70 and 50/0/50. Results showed that O₂ enrichment in the primary oxidant stream is in favor of combustion stabilization, acceleration of ignition and increase of maximum flame temperature, while the full substitution of N₂ by CO₂ in the oxidant stream delays ignition and decreases the maximum flame temperature. However, the overall flow field and flame shapes in these cases are very similar at the same flow rate of the primary oxidant stream. Combustion characteristics of the air-coal is similar to that of the oxy-coal with 30% O₂ and 70% CO₂ in the oxidant stream, indicating that the rear condition is suitable for retrofitting an air-coal fired boiler to an oxy-coal one. The swirl burner with a specially designed preheating chamber can increase flame temperature, accelerate ignition and enhance burning intensity of pulverized coal under oxy-coal combustion. Also, qualitative experimental validation indicated the burner can reduce the overall NO_x emission under certain O₂ enrichment and oxy-coal combustion conditions against the air-coal combustion.

关键词: oxy-coal, eddy dissipation concept model, coal, swirl burner

Abstract: The characteristics of oxy-coal combustion for a swirl burner with a specially designed preheating chamber are studied numerically. In order to increase the accuracy in the prediction of flame temperature and ignition position, eddy dissipation concept (EDC) model with a skeletal chemical reaction mechanism was adopted to describe the combustion of volatile matter. Simulation was conducted under six oxidant stream conditions with different O₂/N₂/CO₂ molar ratios: 21/79/0, 30/70/0, 50/50/0, 21/0/79, 30/0/70 and 50/0/50. Results showed that O₂ enrichment in the primary oxidant stream is in favor of combustion stabilization, acceleration of ignition and increase of maximum flame temperature, while the full substitution of N₂ by CO₂ in the oxidant stream delays ignition and decreases the maximum flame temperature. However, the overall flow field and flame shapes in these cases are very similar at the same flow rate of the primary oxidant stream. Combustion characteristics of the air-coal is similar to that of the oxy-coal with 30% O₂ and 70% CO₂ in the oxidant stream, indicating that the rear condition is suitable for retrofitting an air-coal fired boiler to an oxy-coal one. The swirl burner with a specially designed preheating chamber can increase flame temperature, accelerate ignition and enhance burning intensity of pulverized coal under oxy-coal combustion. Also, qualitative experimental validation indicated the burner can reduce the overall NO_x emission under certain O₂ enrichment and oxy-coal combustion conditions against the air-coal combustion.

Key words: oxy-coal, eddy dissipation concept model, coal, swirl burner

崔凯, 刘冰, 吴玉新, 杨海瑞, 吕俊复, 张海. Numerical Simulation of Oxy-coal Combustion for a Swirl Burner with EDC Model[J]. Chinese Journal of Chemical Engineering, 2014, 22(2): 193-201.

CUI Kai, LIU Bing, WU Yuxin, YANG Hairui, LÜ Junfu, ZHANG Hai. Numerical Simulation of Oxy-coal Combustion for a Swirl Burner with EDC Model[J]. Chin.J.Chem.Eng., 2014, 22(2): 193-201.

参考文献

1 Kakaras, E., Koumanakos, A., Doukelis, A., Glannakopoulos, D., Vorrias, I., "Oxyfuel boiler design in a lignite-fired power plant", Fuel, 86 (14), 2144-2150 (2007).

2 Shah, M.M., "Oxy-fuel combustion for CO₂ capture from PC boilers", In: 31st Intl. Conf. Coal Utilization Fuel System, Coal Technologies Associates, USA, No.3 (2006).

3 Zhang, H., Yue, G.X., Lü, J.F., Zhen, J., Mao, J.X., Fujimori, T., Suko, T., Kiga, T., "Development of high temperature air combustion technology in pulverized fossil fuel fired boilers", Proc. Combust. Inst., 31, 2779-2785 (2007).

4 Mao, J., Jia, X., Zhang, H., Yue, G.X., Fujimori, T., Suko, T., Kiga, T., "Reducing NO_x Emission with PRP Burner for Anthracite fired Boilers", In: 31st Intl. Technical Conf. on Clean Coal & Fuel Systems, Coal Technologies Associates, USA, No. 21 (2006).

5 Cui, K., Zhang, H., Wang, W.L., Wu, Y.X., Yang, H.R., Lü, J.F., "Comparison between realizable κ-ε and RSM model in the simulation for a swirl burner", J. Eng. Thermophys., 33 (11), 2006-2009 (2012). (in Chinese)

6 Cheng, P., "Two-dimensional radiating gas flow by a moment me-thod", AIAA J., 2, 1662-1664 (1964).

7 Siegel, R., Howell, J.R., Thermal Radiation Heat Transfer, Hemis-phere Publishing Corporation, Washington, DC (1992).

8 Chui, E.H., Raithby, G.D., "Computation of radiant heat transfer on a nonorthogonal mesh using the finite-volume method", Heat Transfer B, 23, 269–288 (1993).

9 Raithby, G.D., Chui, E.H., "A finite-volume method for predicting a radiant heat transfer in enclosures with participating media", Heat Transfer, 112, 415-423 (1990).

10 Modest, M.F., Radiative Heat Transfer, 2nd edition, Academic Press, London (2003).

11 Yang, B., Pope, S.B., "An investigation of the accuracy of manifold methods and splitting schemes in the computational implementation of combustion chemistry", Combust. Flame, 112, 16-32 (1998).

12 Byggstoyl, S., Magnussen, B.F., "A model for flame extinction in turbulent low", Proc. Intl. Symp. Turbulent Shear Flows, 14 (10), 32-38 (1983).

13 Gran, I.R., Melaaen, M.C., Magnussen, B.F., "Numerical simulation of local extinction effects in turbulent combustor flows of methane and air", Proc. Combust. Inst., 25, 1283-1291 (1994).

14 Magnussen, B.F., Hjertager, B.H., "On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion", Proc. Combust. Inst., 16, 719-729 (1976).

15 Ertesvag, I.S., Magnussen, B.F., "The eddy dissipation turbulence energy cascade model", Combust. Sci. Tech., 159, 213-235 (2000).

16 Magnussen, B.F., "An investigation into the behavior of soot in a turbulent free jet C2H₂ flame", Proc. Combust. Inst., 15 (1), 1415-1425 (1975).

17 Crowe, C.T., Sharma, M.P., Stock, D.E., "The particle-source-in cell (PSI-CELL) model for gas-droplet flows", J. Fluid Eng., 6, 325-332 (1977).

18 Zhang, J.X., "Turbulent diffusion combustion numerical simulation linking EDC combustion model with chemical kinetics reaction me-chanism", Ind. Furnace, 29 (1), 41-44 (2007). (in Chinese)

19 Mi, J.C., Li, P.F., Zheng, C.G., "Numerical simulation of flameless premixed combustion with an annular nozzle in a recuperative furnace", Chin. J. Chem. Eng., 18 (1), 10-17 (2010).

20 Pope, S.B., "Computationally efficient implementation of combus-tion chemistry using in situ adaptive tabulation", Combust. Theory Model., 1, 41-63 (1997).

21 Das, T.K., "Evolution characteristics of gases during pyrolysis of maceral concentrates of Russian coking coals", Fuel, 80, 489-500 (2001).

22 Fuller, J.E., Coal and Coal Products: Analytical Characterization Techniques, American Chemical Society, Washington, DC (1982).

23 Elliott, M.A., Chemistry of Coal Utilization, Wiley, New York (1981).

24 Howard, J.B., "Fundamentals of coal pyrolysis and hydropyrolysis", In: Chemistry of Coal Utilization, Elliott, M.A., ed., Willey, New York (1981).

25 Solomon, P.R., Fletcher, T.H., Pugmire, P.J., "Progress in coal pyrolysis", Fuel, 72, 587-597 (1993).

26 Solomon, P.R., Hamblen, D.G., Carangelo, R.M., Serio, M.A., Deshpande, G.V., "General model of coal devolatilization", Energy Fuels, 2 (4), 405-422 (1988).

27 Niksa, S., Kerstein, A.R., "The distributed-energy chain model for rapid coal devolatilization kinetics, I: Formulation", Combust. Flame, 66, 95-109 (1986).

28 Niksa, S., "The distributed-energy chain model for rapid coal devo-latilization kinetics, II: Transient weight loss correlations", Combust. Flame, 66, 111-119 (1986).

29 Niksa, S., Kerstein, A.R., "On the role of macromolecular configura-tion in rapid coal devolatilization", Fuel, 66, 1389-1399 (1986).

30 Fletcher, T.H., Kerstein, A.R., Pugmire, R.J., Solum, M., Grant, D.M., "Chemical percolation model for devolatilization. 3. Direct use of carbon-13 NMR data to predict effects of coal type", Energy Fuel, 6, 414-431 (1992).

31 Kobayashi, H., Howard, J.B., Sarofim, A.F., "Coal devolatilization at high temperatures", Proc. Combust. Inst., 16, 411-425 (1977).

32 Baum, M.M., Street, P.J., "Predicting the combustion behavior of coal particles", Combust. Sci. Tech., 3 (5), 231-243 (1971).

33 Bowman, C.T., "Control of combustion-generated nitrogen oxide emissions: Technology driven by regulation", Proc. Combust. Inst., 24, 859-878 (1992).

34 Xieu, D.V., Masuda, T., Cogoli, J. G., Essenhigh, R.H., "A mathe-matic model of a char flame: A comparison between theory and ex-periment", Proc. Combust. Inst., 22, 1461-1468 (1984).

[1]	Yuehua Liu, Lili Chen, Shoujun Liu, Song Yang, Ju Shangguan. Role of iron-based catalysts in reducing NO_x emissions from coal combustion[J]. 中国化学工程学报, 2023, 59(7): 1-8.
[2]	Jian Han, Xinhua Liu, Shanwei Hu, Nan Zhang, Jingjing Wang, Bin Liang. Optimization of decoupling combustion characteristics of coal briquettes and biomass pellets in household stoves[J]. 中国化学工程学报, 2023, 59(7): 182-192.
[3]	Jiangshan Qu, Jianbo Zhang, Huiquan Li, Shaopeng Li, Da Shi, Ruiqi Chang, Wenfen Wu, Ganyu Zhu, Chennian Yang, Chenye Wang. Occurrence, leaching behavior, and detoxification of heavy metal Cr in coal gasification slag[J]. 中国化学工程学报, 2023, 58(6): 11-19.
[4]	Wei Wang, Romain Lemaire, Ammar Bensakhria, Denis Luart. Thermogravimetric analysis and kinetic modeling of the co-pyrolysis of a bituminous coal and poplar wood[J]. 中国化学工程学报, 2023, 58(6): 53-68.
[5]	Shuangtai Liu, Lei He, Qiuxiang Yao, Xi Li, Linyang Wang, Jing Wang, Ming Sun, Xiaoxun Ma. Separation and analysis of six fractions in low temperature coal tar by column chromatography[J]. 中国化学工程学报, 2023, 58(6): 256-265.
[6]	Jian Wang, Yuanhui Shen, Donghui Zhang, Zhongli Tang, Wenbin Li. Integrated vacuum pressure swing adsorption and Rectisol process for CO₂ capture from underground coal gasification syngas[J]. 中国化学工程学报, 2023, 57(5): 265-279.
[7]	Jinchang Liu, Chenyang Shen, Lujie Huang, Tinghao Fang, Yaping Li, Dingcheng Liang, Qiang Xie. Preparation of pitch precursor with excellent spinnability for general-purpose carbon fibre using coal tar pitch as raw material[J]. 中国化学工程学报, 2023, 54(2): 22-28.
[8]	Linyang Wang, Qiang Wang, Yongqi Liu, Qiuxiang Yao, Ming Sun, Xiaoxun Ma. Catalytic conversion of asphaltenes to BTXN using metal-loaded modified HZSM-5[J]. 中国化学工程学报, 2022, 49(9): 253-264.
[9]	Kangcheng Wang, Jie Zhang, Dexian Huang. Online temperature estimation of Shell coal gasification process based on extended Kalman filter[J]. 中国化学工程学报, 2022, 47(7): 134-144.
[10]	Zhibin Ma, Xueli Zhang, Guangjun Lu, Yanxia Guo, Huiping Song, Fangqin Cheng. Hydrothermal synthesis of zeolitic material from circulating fluidized bed combustion fly ash for the highly efficient removal of lead from aqueous solution[J]. 中国化学工程学报, 2022, 47(7): 193-205.
[11]	Qilong Ge, Qi Tian, Sufang Wang, Fang Zhu. Synergistic effects of phosphoric acid modified hydrochar and coal gangue-based zeolite on bioavailability and accumulation of cadmium and lead in contaminated soil[J]. 中国化学工程学报, 2022, 46(6): 150-160.
[12]	Teng Wang, Zihong Xia, Caixia Chen. Computational study of bubble coalescence/break-up behaviors and bubble size distribution in a 3-D pressurized bubbling gas-solid fluidized bed of Geldart A particles[J]. 中国化学工程学报, 2022, 44(4): 485-496.
[13]	Baowen Wang, Zhongyuan Cai, Heyu Li, Yanchen Liang, Tao Jiang, Ning Ding, Haibo Zhao. Reaction characteristics investigation of CeO₂-enhanced CaSO₄ oxygen carrier with lignite[J]. 中国化学工程学报, 2022, 42(2): 319-328.
[14]	Zhen Liu, Haiquan An, Jiansheng Zhang. Discharge characteristics of coal and extraction residue from direct coal liquefaction in partial fluidization silo[J]. 中国化学工程学报, 2022, 52(12): 78-87.
[15]	Xiuli Zhang, Zhengdong Gao, Yongzhuo Liu, Yuanhao Hou, Xiaoqing Sun, Qingjie Guo. Experimental and mechanistic study on chemical looping combustion of caking coal[J]. 中国化学工程学报, 2021, 37(9): 89-96.

Numerical Simulation of Oxy-coal Combustion for a Swirl Burner with EDC Model

Numerical Simulation of Oxy-coal Combustion for a Swirl Burner with EDC Model

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价