[1] A. Mirzaei-Paiaman, M. Masihi, Scaling of recovery by cocurrent spontaneous imbibition in fractured petroleum reservoirs, Energy Technol. 2 (2014) 166-175.[2] A. Zeinolabedini Hezave, S. Dorostkar, S. Ayatollahi,M. Nabipour, B. Hemmateenejad, Investigating the effect of ionic liquid (1-dodecyl-3-methylimidazolium chloride ([C12mim] [Cl])) on the water/oil interfacial tension as a novel surfactant, Colloid Surf. A 421 (2013) 63-71.[3] K. Babu, N. Pal, V.K. Saxena, A. Mandal, Synthesis and characterization of a new polymeric surfactant for chemical enhanced oil recovery, Korean J. Chem. Eng. 33 (2016) 711-719.[4] M.S. Benzagouta, I.M. AlNashef, W. Karnanda, K. Al-Khidir, Ionic liquids as novel surfactants for potential use in enhanced oil recovery, Korean J. Chem. Eng. 30 (2013) 2108-2117.[5] B. Kumar, Effect of Salinity on the Interfacial Tension of Model and Crude Oil Systems, MS Thesis, Calgary, Alberta September 2012.[6] N. Ikeda, M. Araton, K. Motomura, Thermodynamic study on the adsorption of sodium chloride at the water/hexane interface, J. Colloid Interface Sci. 149 (1992) 208-215.[7] B. Cai, J. Yang, T. Guo, Interfacial tension of hydrocarbon + water/brine systems under high pressure, J. Chem. Eng. Data 41 (1996) 493-496.[8] A. Badakshan, P. Bakes, The influence of temperature and surfactant concentration on interfacial tension of saline water and hydrocarbon system in relation to enhanced oil recovery by chemical flooding, SPE Paper Number 20290, 1990.[9] E. Isaacs, K. Smolek, Interfacial tension behavior of athabasca bitumen/aqueous surfactant systems, Can. J. Chem. Eng. 61 (1983) 233-240.[10] F. Moeini, H. Hemmati-Sarapardeh, M.H. Ghazanfari, M. Masihi, S. Ayatollahi, Toward mechanistic understanding of heavy crude oil/brine interfacial tension: the roles of salinity, temperature and pressure, Fluid Phase Equilib. 375 (2014) 191-200.[11] W. Xu, Experimental Investigation of Dynamic Interfacial Interactions at Reservoir Conditions, MSc. Thesis, Louisiana State University, Louisiana, 2005.[12] A.A. Yousef, S. Al-Saleh, M. Al-Jawfi, S. Aramco, Improved/enhanced oil recovery from carbonate reservoirs by tuning injection water salinity and ionic content, Soc. Pet. Eng. (2012) (SPE-154076-MS).[13] C. Vijapurapu, D. Rao, Compositional effects of fluid on spreading, adhesion and wettability in porous media, Colloids Surf. A Physicochem. Eng. Asp. 241 (2004) 335-342.[14] M. Lashkarbolooki, S. Ayatollahi,M. Riazi, The impacts of aqueous ions on interfacial tension and wettability of an asphaltenic-acidic crude oil reservoir during smart water injection, J. Chem. Eng. Data 59 (2014) 3624-3634.[15] M. Lashkarbolooki, S. Ayatollahi, M. Riazi, Effect of salinity, resin, and asphaltene on the surface properties of acidic crude oil/smart water/rock system, Energy Fuel 28 (2014) 6820-6829.[16] M. Lashkarbolooki,M. Riazi, S. Ayatollahi, A. Zeinolabedini Hezave, Synergy effects of ions, resin, and asphaltene on interfacial tension of acidic crude oil and low-high salinity brines, Fuel 165 (2016) 75-85.[17] A.F.H. Ward, L. Tordai, Time-dependence of boundary tensions of solutions. I. The role of diffusion in time-effects, J. Chem. Phys. 14 (1946) 453-461.[18] M. Lashkarbolooki,M. Riazi, S. Ayatollahi, Investigation of effects of salinity, temperature, pressure, and crude oil type on the dynamic interfacial tensions, Chem. Eng. Res. Des. 115 (2016) 53-65.[19] M. Lashkarbolooki, S. Ayatollahi, M. Riazi, Mechanistic study on the dynamic interfacial tension of crude oil+water systems: experimental and modeling approaches, J. Ind. Eng. Chem. 35 (2016) 408-416.[20] M.V. Kok, K.G. Gul, Thermal characteristics and kinetics of crude oils and SARA fractions, Thermochim. Acta 569 (2013) 66-70.[21] P. Delahay, I. Trachtenberg, Adsorption kinetics and electrode processes, J. Chem. Soc. 79 (1957) 2355-2362.[22] S. Zarkar, V. Pauchard, U. Farooq, A. Couzis, S. Banerjee, Interfacial properties of asphaltenes at toluene-water interfaces, Langmuir 31 (2015) 4878-4886.[23] P. Joos, J.P. Fang, G. Serrien, Comments on some dynamic surface tension measurements by the dynamic bubble pressure method, J. Colloid Interface Sci. 151 (1992) 144-149.[24] M. Jeribi, B. Almir-Assad, D. Langevin, I. Hénaut, J.F. Argillier, Adsorption kinetics of asphaltenes at liquid interfaces, J. Colloid Interface Sci. 256 (2002) 268-272.[25] X.Y. Hua, M.J. Rosen, Dynamic surface tension of aqueous surfactant solutions 3. Some effects of molecular structure and environment, J. Colloid Interface Sci. 141 (1991) 180-190.[26] X.Y. Hua, M.J. Rosen, Dynamic surface tension of aqueous surfactant solutions: 1. Basic parameters, J. Colloid Interface Sci. 124 (1998) 652-659.[27] H. Butt, K. Graf, M. Kappl, Physics and Chemistry of Interfaces, Wiley-VCH, Weinheim, 2006.[28] J. Drelich, C. Fang, C.L. White, Measurement of interfacial tension in fluid-fluid systems, Encycl. Surf. Colloid Sci. (2002) 3152-3166.[29] A. Boonma, P. Gieles, C.H. Massen, J. Egberts, Dynamic surface tension measurements on surface active materials, Thermochim. Acta 103 (1986) 107-112.[30] A.I. Rusanov, V.A. Prokhorov, Interfacial Tensiometry, Elsevier, Amsterdam, 1996.[31] S.Y. Lin, K. Mckeigue, C. Maldarelli, The gas-oil interfacial behavior during gas injection into an asphaltenic oil reservoir, AIChE J. 36 (1990) 1785-1795.[32] Z. Yang, M. Li, B. Peng, M. Lin, Z. Dong, Y. Ling, Interfacial tension of CO2 and organic liquid under high pressure and temperature, Chin. J. Chem. Eng. 22 (2014) 1302-1306.[33] A. Zolghadr, M. Escrochi, S. Ayatollahi, Temperature and composition effect on CO2 miscibility by interfacial tension measurement, J. Chem. Eng. Data 58 (2013) 1168-1175.[34] M. Lashkarbolooki, S. Ayatollahi, Effect of asphaltene and resin on interfacial tension of acidic crude oil/sulfate aqueous solution: experimental study, Fluid Phase Equilib. 414 (2016) 149-155.[35] Y. Rotenberg, L. Boruvka, A.W. Neumann, Determination of surface tension and contact angle from the shapes of axisymmetric fluid interfaces, J. Colloid Interface Sci. 93 (1983) 169-183.[36] Standard test method for acid number of petroleum products by potentiometric titration, An American National Standard, British Standard 4457, Designation 177/96, ASTM International,West Conshohocken, PA, 2004.[37] C. Xinheng, T. Songbai, Review and comprehensive analysis of composition and origin of high acidity crude oils, China Pet. Process. Petrochem. Technol. 13 (2011) 6-15.[38] C.M. Phan, A.V. Nguyen, G.M. Evans, Dynamic adsorption of sodiumdodecylbenzene sulphonate and Dowfroth 250 onto the air-water interface, Min. Eng. 18 (2005) 599-603.[39] A.V.Nguyen, C.M. Phan, G.M. Evans, Effect of the bubble size on the dynamic adsorption of frothers and collectors in flotation, Int. J. Miner. Process. 79 (2006) 18-26.[40] D. Pradilla, S. Simon, J. Sjöblom, Mixed interfaces of asphaltenes and model demulsifiers part I: adsorption and desorption of single components, Colloids Surf. A Physicochem. Eng. Asp. 466 (2015) 45-56.[41] J.P. Rane, S. Zarkar, V. Pauchard, O.C. Mullins, D. Christie, A.B. Andrews, A.E. Pomerantz, S. Banerjee, Applicability of the Langmuir equation of state for asphaltene adsorption at the oil-water interface: coal-derived, petroleum, and synthetic asphaltenes, Energy Fuel 29 (2015) 3584-3590.[42] J.P. Rane, V. Pauchard, A. Couzis, S. Banerjee, Interfacial rheology of asphaltenes at oil-water interfaces and interpretation of the equation of state, Langmuir 29 (2013) 4750-4759.[43] P.C. Hiemenz, R. Rajagopalan, Principles of Colloid and Surface Chemistry, Revised and Expanded, vol. 14, CRC press, USA, 1997.[44] E.Guggenheim, N. Adam,The thermodynamics of adsorption at the surface of solutions, Proc. R. Soc. London Ser. A 139 (1933) 218-236.[45] A. Adamson, A. Gast, Physical Chemistry of Surfaces, sixth ed. Wiley-Interscience, New York, 1997.[46] J. Kotz, P. Treichel, J. Townsend, Chemistry and Chemical Reactivity, seventh ed. Stamford, CT, Cengage Learning, 2009.[47] X. Hu, Y. Li, H. Sun, X. Song, Q. Li, X. Cao, X. Li, Effect of divalent cationic ions on the adsorption behavior of zwitterionic surfactant at silica/solution interface, J. Phys. Chem. B 114 (2010) 8910-8916. |