SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2021, Vol. 32 ›› Issue (4): 183-190.DOI: 10.1016/j.cjche.2020.08.032

• Catalysis, Kinetics and Reaction Engineering • 上一篇    下一篇

Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries

Hakima Kadji1, Idris Yahiaoui1, Zehira Garti1, Abdeltif Amrane2, Farida Aissani-Benissad1   

  1. 1 Laboratoire de Génie de l'Environnement(LGE), Faculté de Technologie, Université de Bejaia, 06000 Bejaia, Algeria;
    2 Ecole Nationale Supérieure de Chimie de Rennes, Université Rennes1, CNRS, UMR 6226, 11 allée de Beaulieu, CS 50837, France
  • 收稿日期:2020-01-24 修回日期:2020-08-09 出版日期:2021-04-28 发布日期:2021-06-19
  • 通讯作者: Hakima Kadji

Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries

Hakima Kadji1, Idris Yahiaoui1, Zehira Garti1, Abdeltif Amrane2, Farida Aissani-Benissad1   

  1. 1 Laboratoire de Génie de l'Environnement(LGE), Faculté de Technologie, Université de Bejaia, 06000 Bejaia, Algeria;
    2 Ecole Nationale Supérieure de Chimie de Rennes, Université Rennes1, CNRS, UMR 6226, 11 allée de Beaulieu, CS 50837, France
  • Received:2020-01-24 Revised:2020-08-09 Online:2021-04-28 Published:2021-06-19
  • Contact: Hakima Kadji

摘要: This study reports the removal of amoxicillin (AMX) in aqueous media using the electro-Fenton process in the presence of a graphite cathode recovered from used batteries. The impact of the relevant parameters on the electro-Fenton process, namely the applied current intensity, the temperature, the initial concentration of AMX and the initial concentration of ferrous ions were investigated. The results showed that the optimal values were:I=600 mA, T=25℃,[AMX]0=0.082 mmol·L-1 and[Fe2+]=1 mmol·L-1, leading to 95% degradation and 74% mineralization. The model parameters of AMX mineralization were determined using nonlinear methods, showing that it follows a pseudo-second-order kinetic. The Energy consumption (EC) calculated under the optimal values was found to be 0.79 kW·h·g-1, which was of the same order of magnitude of those reported in other findings; while it is noteworthy that the electrodes used in our study are of a lower cost.

关键词: Wastewater, Amoxicillin, Electro-Fenton, Pharmaceuticals, Solid waste recovery, Kinetic modelling

Abstract: This study reports the removal of amoxicillin (AMX) in aqueous media using the electro-Fenton process in the presence of a graphite cathode recovered from used batteries. The impact of the relevant parameters on the electro-Fenton process, namely the applied current intensity, the temperature, the initial concentration of AMX and the initial concentration of ferrous ions were investigated. The results showed that the optimal values were:I=600 mA, T=25℃,[AMX]0=0.082 mmol·L-1 and[Fe2+]=1 mmol·L-1, leading to 95% degradation and 74% mineralization. The model parameters of AMX mineralization were determined using nonlinear methods, showing that it follows a pseudo-second-order kinetic. The Energy consumption (EC) calculated under the optimal values was found to be 0.79 kW·h·g-1, which was of the same order of magnitude of those reported in other findings; while it is noteworthy that the electrodes used in our study are of a lower cost.

Key words: Wastewater, Amoxicillin, Electro-Fenton, Pharmaceuticals, Solid waste recovery, Kinetic modelling