Influence of synergistic effect of LiNi0.8Co0.15Al0.05O2@Cr2O5 composite on the electrochemical properties

doi:10.1016/j.cjche.2020.09.017

中国化学工程学报 ›› 2021, Vol. 33 ›› Issue (5): 327-336.DOI: 10.1016/j.cjche.2020.09.017

• Material and Product Engineering • 上一篇下一篇

Influence of synergistic effect of LiNi_0.8Co_0.15Al_0.05O₂@Cr₂O₅ composite on the electrochemical properties

Yunke Wang^1,2, Yongjia Li³, Yenan Zhang^1,2, Guozheng Zha^1,2, Feng Liang^1,2, Yongnian Dai^1,2, Yaochun Yao^1,2

1 The National Engineering Laboratory for Vacuum Metallurgy, Kunming University of Science and Technology, Kunming 650093, China;
2 Engineering Laboratory for Advanced Battery and Materials of Yunnan Province, Kunming University of Science and Technology, Kunming 650093, China;
3 Faculty of Metallurgy and Mining, Kunming Metallurgy College, Kunming 650033, China

收稿日期:2020-06-11 修回日期:2020-07-23 出版日期:2021-05-28 发布日期:2021-08-19
通讯作者: Yaochun Yao
基金资助:
This work was financially supported by the National Natural Science Foundation of China (52064031), the Program for Innovative Research Team in the University of Ministry of Education of China (IRT_17R48) and National Natural Science Foundation of China (51674129). The authors sincerely acknowledge the anonymous reviewers for their insights and comments to further improve the quality of the manuscript.

Influence of synergistic effect of LiNi_0.8Co_0.15Al_0.05O₂@Cr₂O₅ composite on the electrochemical properties

Yunke Wang^1,2, Yongjia Li³, Yenan Zhang^1,2, Guozheng Zha^1,2, Feng Liang^1,2, Yongnian Dai^1,2, Yaochun Yao^1,2

1 The National Engineering Laboratory for Vacuum Metallurgy, Kunming University of Science and Technology, Kunming 650093, China;
2 Engineering Laboratory for Advanced Battery and Materials of Yunnan Province, Kunming University of Science and Technology, Kunming 650093, China;
3 Faculty of Metallurgy and Mining, Kunming Metallurgy College, Kunming 650033, China

Received:2020-06-11 Revised:2020-07-23 Online:2021-05-28 Published:2021-08-19
Contact: Yaochun Yao
Supported by:
This work was financially supported by the National Natural Science Foundation of China (52064031), the Program for Innovative Research Team in the University of Ministry of Education of China (IRT_17R48) and National Natural Science Foundation of China (51674129). The authors sincerely acknowledge the anonymous reviewers for their insights and comments to further improve the quality of the manuscript.

摘要/Abstract

摘要： LiNi_0.8Co_0.15Al_0.05O₂ (NCA)@Cr₂O₅ composite electrode combines the high rate-capability characteristics of NCA with the stability of Cr₂O₅, playing a synergistic role in improving the cyclic stability, initial discharge capacity and the security of low cut-off voltage (2.0 V). When the mass ratio of Cr₂O₅ in NCA is 45% (mass), the capacity retention rate increases from 58.5% without Cr₂O₅ to 69.3% in the range of 2.0-4.3 V. The initial discharge capacity of NCA@Cr₂O₅ composite material is 211.4 mA·h·g^-1, its first coulombic efficiency is 94.2%, and the charging capacity remains approximately constant when mixed with 15% (mass) Cr₂O₅. The reason for the improvement of the initial charge-discharge efficiency (ICDE) was explained. Impedance and cyclic voltammetry analysis reveal more detailed reasons of the observed improvements. Compared with NCA cathode material, the NCA@Cr₂O₅ composite material can provide not only additional stable sites and channels for Li⁺ insertion/extraction to make up for the loss of active Li⁺ sites and prevent the accumulation of Li⁺ in the circulation process, but also protect the NCA electrode from the corrosion of the electrolyte decomposition by the Cr₂O₅ nanoparticles adhering to NCA interface.

关键词: NCA@Cr₂O₅ composite, Cathode material, Synergistic effect, Electrochemical properties, Low voltage

Abstract: LiNi_0.8Co_0.15Al_0.05O₂ (NCA)@Cr₂O₅ composite electrode combines the high rate-capability characteristics of NCA with the stability of Cr₂O₅, playing a synergistic role in improving the cyclic stability, initial discharge capacity and the security of low cut-off voltage (2.0 V). When the mass ratio of Cr₂O₅ in NCA is 45% (mass), the capacity retention rate increases from 58.5% without Cr₂O₅ to 69.3% in the range of 2.0-4.3 V. The initial discharge capacity of NCA@Cr₂O₅ composite material is 211.4 mA·h·g^-1, its first coulombic efficiency is 94.2%, and the charging capacity remains approximately constant when mixed with 15% (mass) Cr₂O₅. The reason for the improvement of the initial charge-discharge efficiency (ICDE) was explained. Impedance and cyclic voltammetry analysis reveal more detailed reasons of the observed improvements. Compared with NCA cathode material, the NCA@Cr₂O₅ composite material can provide not only additional stable sites and channels for Li⁺ insertion/extraction to make up for the loss of active Li⁺ sites and prevent the accumulation of Li⁺ in the circulation process, but also protect the NCA electrode from the corrosion of the electrolyte decomposition by the Cr₂O₅ nanoparticles adhering to NCA interface.

Key words: NCA@Cr₂O₅ composite, Cathode material, Synergistic effect, Electrochemical properties, Low voltage

Yunke Wang, Yongjia Li, Yenan Zhang, Guozheng Zha, Feng Liang, Yongnian Dai, Yaochun Yao. Influence of synergistic effect of LiNi_0.8Co_0.15Al_0.05O₂@Cr₂O₅ composite on the electrochemical properties[J]. 中国化学工程学报, 2021, 33(5): 327-336.

参考文献

[1] S. Erol, M.E. Orazem, R.P. Muller, Influence of overcharge and over-discharge on the impedance response of LiCoO₂/C batteries, J. Power Sources 270(2014) 92-100.
[2] A. Purwanto, C.S. Yudha, U. Ubaidillah, Hendri Widiyandari, Takashi Ogi, Hery Haerudin, NCA cathode material: Synthesis methods and performance enhancement efforts, Mater. Res. Express 5(12) (2018) 122001.
[3] J.O. Besenhard, J. Heydecke, H.P. Fritz, Characteristics of molybdenum oxide and chromium oxide cathodes in primary and secondary organic electrolyte lithium batteries I. Morphology, structure and their changes during discharge and cycling, Solid State Ion 6(3) (1982) 215-224.
[4] M.-J. Lee, M. Noh, M.-H. Park, M. Jo, H. Kim, H. Nam, J. Cho, The role of nanoscale-range vanadium treatment in LiNi_0.8Co_0.15Al_0.05O₂ cathode materials for Li-ion batteries at elevated temperatures, J. Mater. Chem. A 3(25) (2015) 13453-13460.
[5] H.R. Chen, J.A. Dawson, J.H. Harding, Effects of cationic substitution on structural defects in layered cathode materials LiNiO₂, J. Mater. Chem. A 2(21) (2014) 7988-7996.
[6] D. Qian, B. Xu, H.M. Cho, Lithium lanthanum titanium oxides: A fast ionic conductive coating for lithium-ion battery cathodes, Chem. Mater. 24(14) (2012) 2744-2751.
[7] D.S. Hall, R. Gauthier, A. Eldesoky, New chemical insights into the beneficial role of Al₂O₃ cathode coatings in lithium-ion cells, ACS Appl. Mater. Interfaces 11(15) (2019) 14095-14100.
[8] P. Guan, L. Zhou, Z. Yu, Y. Sun, Y. Liu, F. Wu, Y. Jiang, D. Chu, Recent progress of surface coating on cathode materials for high-performance lithium-ion batteries, J. Energy Chem. 43(2020) 220-235.
[9] M.J. Hou, F. Liang, K. Chen, Y.N. Dai, Challenges and perspectives of NASICONtype solid electrolytes for all solid-state lithium batteries, Nanotechnology 31(2020) 132003.
[10] Y. Wang, D. Zhao, K. Zhang, Enhancing the rate performance of high-capacity LiNi_0.8Co_0.15Al_0.05O₂ cathode materials by using Ti₄O₇ as a conductive additive, J. Energy Storage 28(2020) 101182.
[11] S.H. Kang, W.S. Yoon, K.W. Nam, Investigating the first-cycle irreversibility of lithium metal oxide cathodes for Li batteries, J. Mater. Sci. 43(14) (2008) 4701-4706.
[12] R.P. Ramasamy, B. Veeraraghavan, B. Haran, Electrochemical characterization of a polypyrrole/Co_0.2CrO_x composite as a cathode material for lithium ion batteries, J. Power Sources 124(1) (2003) 197-203.
[13] P. Arora, D. Zhang, B.N. Popov, Chromium oxides and lithiated chromium oxides. Promising cathode materials for secondary lithium batteries, Electrochem. Solid State 1(6) (1998) 249-251.
[14] Y. Liu, X. Fan, Z. Zhang, Enhanced electrochemical performance of Li-rich layered cathode materials by combined Cr doping and LiAlO₂ coating, ACS Sustain. Chem. Eng. 7(2) (2019) 2225-2235.
[15] J. Yang, Z. Yu, B. Yang, Electrochemical characterization of Cr₈O₂₁ modified LiNi_0.5Co_0.2Mn_0.3O₂ cathode material, Electrochim. Acta 266(2018) 342-347.
[16] X.Y. Feng, N. Ding, L. Wang, Synthesis and reversible lithium storage of Cr₂O₅ as a new high energy density cathode material for rechargeable lithium batteries, J. Power Sources 222(2013) 184-187.
[17] X.Y. Feng, P.H. Chien, A.M. Rose, Cr₂O₅ as new cathode for rechargeable sodium ion batteries, J. Solid State Chem. 242(2016) 96-101.
[18] X. Ding, B. Zou, Y. Li, A novel lithium-ion battery comprising Li-rich@Cr₂O₅ composite cathode and Li₄Ti₅O₁₂ anode with controllable coulombic efficiency, Sci. China Mater. 60(9) (2017) 839-848.
[19] S.T. Myung, K. Hosoya, S. Komaba, Improvement of cycling performance of Li_1.1Mn_1.9O₄ at 60 C by NiO addition for Li-ion secondary batteries, Electrochim. Acta 51(26) (2006) 5912-5919.
[20] S.T. Myung, M.H. Cho, H.T. Hong, T.H. Kang, C.S. Kim, Electrochemical evaluation of mixed oxide electrode for Li-ion secondary batteries: LiMnO and LiNiCoAlO, J. Power Sources 146(2005) 222.
[21] T. Numata, C. Amemiya, T. Kumeuchi, M. Shirakata, M. Yonezawa, Advantages of blending LiNi_0.8Co_0.2O₂ into Li_1+xMn_2-xO₄ cathodes, J. Power Sources 97-98(2001) 358-360.
[22] A. Manthiram, W. Choi, Suppression of Mn dissolution in spinel cathodes by trapping the protons within layered oxide cathodes, Electrochem. Solid State 10(9) (2007) 228-231.
[23] K.G. Gallagher, S. Kang, S.U. Park, xLi₂MnO₃(1-x) LiMO₂ blended with LiFePO₄ to achieve high energy density and pulse power capability, J. Power Sources 196(22) (2011) 9702-9707.
[24] N. Imachi, Y. Takano, Fujimoto H layered cathode for improving safety of Li-ion batteries, J. Electrochem. Soc. 154(5) (2007) A412-A416.
[25] J. Gao, A. Manthiram, Eliminating the irreversible capacity loss of high capacity layered Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂ cathode by blending with other lithium insertion hosts, J. Power Sources 191(2) (2009) 644-647.
[26] J. Gao, J. Kim, A. Manthiram, High capacity Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂-V₂O₅ composite cathodes with low irreversible capacity loss for lithium ion batteries, Electrochem. Commun. 11(1) (2009) 84-86.
[27] R. Robert, C. Bünzli, E.J. Berg, Activation mechanism of LiNi_0.80Co_0.15Al_0.05O₂: surface and bulk operando electrochemical, differential electrochemical mass spectrometry, and X-ray diffraction analyses, Chem. Mater. 27(2) (2015) 526-536.
[28] W.S. Yoon, K.Y. Chung, J. McBreen, Electronic structural changes of the electrochemically Li-ion deintercalated LiNi_0.8Co_0.15Al_0.05O₂ cathode material investigated by X-ray absorption spectroscopy, J. Power Sources 174(2) (2007) 1015-1020.
[29] R.P. Ramasamy, P. Ramadass, B.S. Haran, Synthesis, characterization and cycling performance of novel chromium oxide cathode materials for lithium batteries, J. Power Sources 124(1) (2003) 155-162.
[30] Y. Liu, X. Fan, X. Huang, Electrochemical performance of Li_1.2Ni_0.2Mn_0.6O₂ coated with a facilely synthesized Li_1.3Al_0.3Ti_1.7(PO₄)₃, J. Power Sources 403(2018) 27-37.
[31] Q.C. Zhuang, X.Y. Qiu, S.D. Xu, Diagnosis of electrochemical impedance spectroscopy in lithium-ion batteries. Lithium ion battery-new dev, Intech Open 8(2012) 189-227.
[32] S. Li, P. Ge, F. Jiang, The advance of nickel-cobalt-sulfide as ultra-fast/high sodium storage materials: The influences of morphology structure, phase evolution and interface property, Energy Stor. Mater. 16(2019) 267-280.
[33] X. Qu, Z. Yu, D. Ruan, A. Dou, M. Su, Y. Zhou, Y. Liu, D. Chu, Enhanced electrochemical performance of Ni-rich cathode materials with Li_1.3Al_0.3Ti_1.7(PO₄)₃ coating, ACS Sustain. Chem. Eng. 8(15) (2020) 5819-5830.

Influence of synergistic effect of LiNi_0.8Co_0.15Al_0.05O₂@Cr₂O₅ composite on the electrochemical properties

Influence of synergistic effect of LiNi_0.8Co_0.15Al_0.05O₂@Cr₂O₅ composite on the electrochemical properties

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Wei Wang, Romain Lemaire, Ammar Bensakhria, Denis Luart. Thermogravimetric analysis and kinetic modeling of the co-pyrolysis of a bituminous coal and poplar wood[J]. 中国化学工程学报, 2023, 58(6): 53-68.
[2]	Xiangjun Li, Shujun Li, Xiaoping Wang, Muhammad Asif Nawaz, Dianhua Liu. Polyoxymethylene dimethyl ethers synthesis from methanol and formaldehyde solution over one-pot synthesized spherical mesoporous sulfated zirconia[J]. 中国化学工程学报, 2022, 46(6): 161-172.
[3]	Wanyuan Wang, Chengxin Wen, Daoyuan Zheng, Chunhu Li, Junjie Bian, Xinbo Wang. Simultaneous degradation of RhB and reduction of Cr(VI) by MIL-53(Fe)/Polyaniline (PANI) with the mediation of organic acid[J]. 中国化学工程学报, 2022, 42(2): 55-63.
[4]	Yan Zhang, Jiaguang Zheng, Zhiyu Lu, Mengchen Song, Jiahuan He, Fuying Wu, Liuting Zhang. Boosting the hydrogen storage performance of magnesium hydride with metal organic framework-derived Cobalt@Nickel oxide bimetallic catalyst[J]. 中国化学工程学报, 2022, 52(12): 161-171.
[5]	Xiaodong Tang, Qiankun Guo, Miaomiao Zhou, Shengwen Zhong. Direct regeneration of LiNi_0.5Co_0.2Mn_0.3O₂ cathode material from spent lithium-ion batteries[J]. 中国化学工程学报, 2021, 40(12): 278-286.
[6]	Chengyi Ai, Tingting Li, Rongzheng Ren, Zhenhua Wang, Wang Sun, Jinsheng Feng, Kening Sun, Jinshuo Qiao. Barium-doped Pr₂Ni_0.6Cu_0.4O_4+δ with triple conducting characteristics as cathode for intermediate temperature proton conducting solid oxide fuel cell[J]. 中国化学工程学报, 2021, 39(11): 269-276.
[7]	Lihua Qian, Guojun Lan, Xiaoyan Liu, Zhenqing Li, Ying Li. Aqueous-phase hydrogenation of levulinic acid over carbon layer protected silica-supported cobalt-ruthenium catalysts[J]. 中国化学工程学报, 2021, 38(10): 114-122.
[8]	Haowei Huang, Dexuan Dong, Weijie Li, Xinya Zhang, Li Zhang, Ying Chen, Xinxin Sheng, Xiang Lu. Synergistic effect of MXene on the flame retardancy and thermal degradation of intumescent flame retardant biodegradable poly (lactic acid) composites[J]. 中国化学工程学报, 2020, 28(7): 1981-1993.
[9]	Haifeng Yu, Zhaofeng Yang, Huawei Zhu, Hao Jiang, Chunzhong Li. Nitrogen-doped carbon stabilized LiFe_0.5Mn_0.5PO₄/rGO cathode materials for high-power Li-ion batteries[J]. 中国化学工程学报, 2020, 28(7): 1935-1940.
[10]	Adriana Reyes-Serrano, Joel E. López-Alejo, Manuel A. Hernández-Cortázar, Ignacio Elizalde. Removing contaminants from tannery wastewater by chemical precipitation using CaO and Ca(OH)₂[J]. 中国化学工程学报, 2020, 28(4): 1107-1111.
[11]	Yong Huang, Ningbo Wang, Qiaoxia Liu, Wusheng Wang, Xiaoxun Ma. Co-pyrolysis of bituminous coal and biomass in a pressured fluidized bed[J]. 中国化学工程学报, 2019, 27(7): 1666-1673.
[12]	Abrar Khan, Raja Arumugam Senthil, Junqing Pan, Yanzhi Sun. A facile preparation of 3D flower-shaped Ni/Al-LDHs covered by β-Ni(OH)₂ nanoplates as superior material for high power application[J]. 中国化学工程学报, 2019, 27(10): 2526-2534.
[13]	Yongbing Xie, Yingying Chen, Jin Yang, Chenming Liu, He Zhao, Hongbin Cao. Distinct synergetic effects in the ozone enhanced photocatalytic degradation of phenol and oxalic acid with Fe³⁺/TiO₂ catalyst[J]. Chinese Journal of Chemical Engineering, 2018, 26(7): 1528-1535.
[14]	Yan Cui, Shengming Xu . High tap density of Ni₃(PO₄)₂ coated LiNi_1/3Co_1/3Mn_1/3O₂ with enhanced cycling performance at high cut-off voltage[J]. Chinese Journal of Chemical Engineering, 2015, 23(1): 315-320.
[15]	Songgyun Ri, Honggui Deng, Lihui Zhou, Jun Hu, Honglai Liu, Ying Hu. Lithium Storage Performance of Hollow and Core/Shell TiO₂ Microspheres Containing Carbon[J]. , 2014, 22(10): 1153-1161.