Simultaneous preparation of TiO2 and ammonium alum, and microporous SiO2 during the mineral carbonation of titanium-bearing blast furnace slag

doi:10.1016/j.cjche.2020.03.020

中国化学工程学报 ›› 2020, Vol. 28 ›› Issue (9): 2256-2266.DOI: 10.1016/j.cjche.2020.03.020

• Separation Science and Engineering • 上一篇下一篇

Simultaneous preparation of TiO₂ and ammonium alum, and microporous SiO₂ during the mineral carbonation of titanium-bearing blast furnace slag

Yingjie Xiong¹, Tahani Aldahri^2,3, Weizao Liu^1,2, Guanrun Chu¹, Guoquan Zhang¹, Dongmei Luo¹, Hairong Yue¹, Bin Liang¹, Chun Li¹

1 School of Chemical Engineering, Sichuan University, Chengdu 610065, China;
2 Department of Chemical and Biochemical Engineering, Western University, London, Ontario, Canada;
3 Department of physics, Taibah University, Madinah, Saudi Arabia

收稿日期:2019-12-26 修回日期:2020-03-08 出版日期:2020-09-28 发布日期:2020-10-21
通讯作者: Dongmei Luo, Chun Li
基金资助:
The authors are grateful for the financial support of the National Key Projects for Fundamental Research and Development of China (2016YFB0600904), Sichuan University Postdoctoral Research and Development Fund (2017SCU12017), Project of State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization (18H0083), Sichuan Science and Technology Department Project (2019YJ0111). We also appreciate Hui Wang, Xi Wu and Guanglei Cheng from the Analytical & Testing Center of Sichuan University for their help with SEM and ICP characterization.

Simultaneous preparation of TiO₂ and ammonium alum, and microporous SiO₂ during the mineral carbonation of titanium-bearing blast furnace slag

Yingjie Xiong¹, Tahani Aldahri^2,3, Weizao Liu^1,2, Guanrun Chu¹, Guoquan Zhang¹, Dongmei Luo¹, Hairong Yue¹, Bin Liang¹, Chun Li¹

1 School of Chemical Engineering, Sichuan University, Chengdu 610065, China;
2 Department of Chemical and Biochemical Engineering, Western University, London, Ontario, Canada;
3 Department of physics, Taibah University, Madinah, Saudi Arabia

Received:2019-12-26 Revised:2020-03-08 Online:2020-09-28 Published:2020-10-21
Contact: Dongmei Luo, Chun Li
Supported by:
The authors are grateful for the financial support of the National Key Projects for Fundamental Research and Development of China (2016YFB0600904), Sichuan University Postdoctoral Research and Development Fund (2017SCU12017), Project of State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization (18H0083), Sichuan Science and Technology Department Project (2019YJ0111). We also appreciate Hui Wang, Xi Wu and Guanglei Cheng from the Analytical & Testing Center of Sichuan University for their help with SEM and ICP characterization.

摘要/Abstract

摘要： In this study, a route for simultaneous mineralization of CO₂ and production of titanium dioxide and ammonium alum, and microporous silicon dioxide from titanium-bearing blast furnace slag (TBBF slag) was proposed, which is comprised of (NH₄)₂SO₄ roasting, acid leaching, ammonium alum crystallization, silicic acid flocculation and Ti hydrolysis. The effects of relevant process parameters were systematically investigated. The results showed that under the optimal roasting and leaching conditions about 85% of titanium and 84.6% of aluminum could be extracted while only 30% of silicon entered the leachate. 84% of Al³⁺ was crystallized from the leachate in the form of ammonium aluminum sulfate dodecahydrate with a purity up to 99.5 wt%. About 85% of the soluble silicic acid was flocculated with the aid of secondary alcohol polyoxyethylene ether 9 (AEO-9) to yield a microporous SiO₂ material (97.4 wt%) from the crystallized mother liquor. The Al- and Si-depleted solution was then hydrolyzed to generate a titanium dioxide (99.1 wt%) with uniform particle size distribution. It was figured out that approximately 146 kg TiO₂ could be produced from 1000 kg of TBBF slag. Therefore, the improved process is a promising method for industrial application.

关键词: CO₂ mineralization, Titanium-bearing blast furnace slag, Ammonium sulfate, Flocculation, Titanium dioxide

Abstract: In this study, a route for simultaneous mineralization of CO₂ and production of titanium dioxide and ammonium alum, and microporous silicon dioxide from titanium-bearing blast furnace slag (TBBF slag) was proposed, which is comprised of (NH₄)₂SO₄ roasting, acid leaching, ammonium alum crystallization, silicic acid flocculation and Ti hydrolysis. The effects of relevant process parameters were systematically investigated. The results showed that under the optimal roasting and leaching conditions about 85% of titanium and 84.6% of aluminum could be extracted while only 30% of silicon entered the leachate. 84% of Al³⁺ was crystallized from the leachate in the form of ammonium aluminum sulfate dodecahydrate with a purity up to 99.5 wt%. About 85% of the soluble silicic acid was flocculated with the aid of secondary alcohol polyoxyethylene ether 9 (AEO-9) to yield a microporous SiO₂ material (97.4 wt%) from the crystallized mother liquor. The Al- and Si-depleted solution was then hydrolyzed to generate a titanium dioxide (99.1 wt%) with uniform particle size distribution. It was figured out that approximately 146 kg TiO₂ could be produced from 1000 kg of TBBF slag. Therefore, the improved process is a promising method for industrial application.

Key words: CO₂ mineralization, Titanium-bearing blast furnace slag, Ammonium sulfate, Flocculation, Titanium dioxide

Yingjie Xiong, Tahani Aldahri, Weizao Liu, Guanrun Chu, Guoquan Zhang, Dongmei Luo, Hairong Yue, Bin Liang, Chun Li. Simultaneous preparation of TiO₂ and ammonium alum, and microporous SiO₂ during the mineral carbonation of titanium-bearing blast furnace slag[J]. 中国化学工程学报, 2020, 28(9): 2256-2266.

参考文献

[1] E. Koivisto, R. Erlund, M. Fagerholm, R. Zevenhoven, Extraction of magnesium from four Finnish magnesium silicate rocks for CO₂ mineralisation-part 1:thermal solid/solid extraction, Hydrometallurgy 166(2016) 222-228.
[2] T. Hosseini, M. Daneshpayeh, C. Selomulya, N. Haque, L. Zhang, Chemical kinetic modeling and parameter sensitivity analysis for the carbonation of Ca²⁺ and Mg²⁺ under ambient conditions, Hydrometallurgy 167(2017) 141-152.
[3] W.J.J. Huijgen, R.N.J. Comans, Mineral CO₂ sequestration by steel slag carbonation, Environ. Sci. Technol. 39(24) (2005) 9676-9682.
[4] D.N. Huntzinger, J.S. Gierke, S.K. Kawatra, T.C. Eisele, L.L. Sutter, Carbon dioxide sequestration in cement kiln dust through mineral carbonation, Environ. Sci. Technol. 43(6) (2009) 1986-1992.
[5] F.K. Crundwell, The mechanism of dissolution of forsterite, olivine and minerals of the orthosilicate group, Hydrometallurgy 150(2014) 68-82.
[6] T. Hosseini, C. Selomulya, N. Haque, L. Zhang, Investigating the effect of the Mg²⁺/Ca²⁺ molar ratio on the carbonate speciation during the mild mineral carbonation process at atmospheric pressure, Energy Fuel 29(11) (2015) 7483-7496.
[7] W.J.J. Huijgen, G.J. Ruijg, R.N.J. Comans, G.J. Witkamp, Energy consumption and net CO₂ sequestration of aqueous mineral carbonation, Ind. Eng. Chem. Res. 45(26) (2006) 9184-9194.
[8] U.S. Geological Survey, Mineral commodity summaries 2018, U.S. Geological Survey (2018) 83-83.
[9] R. Nicolle, Steelmaking plants:towards lower energy consumption and lower CO₂ production using more electricity, Revue de Métallurgie 107(2010) 377-385.
[10] J.L. Tian, Q. Zhang, Resource utilization of steel slag and environmental pollution treatment, Resource Recycling 1(2013) 55-57.
[11] V. Ján, L. Michal, J. Štefan, Š. Vladimír, H. Slavomír, Characterization of blast furnace sludge and removal of zinc by microwave assisted extraction, Hydrometallurgy 129-130(2012) 67-73.
[12] E. Benhelal, G. Zahedi, E. Shamsaei, A. Bahadori, Global strategies and potentials to curb CO₂ emissions in cement industry, J. Clean. Prod. 51(2013) 142-161.
[13] U.B. Alicja, E. Mokrzycki, CO₂ mineral sequestration with the use of ground granulated blast furnace slag, Gospodarka Surowcami Mineralnymi 33(2017) 111-224.
[14] S. Eloneva, A. Said, C.J. Fogelholm, R. Zevenhoven, Preliminary assessment of a method utilizing carbon dioxide and steelmaking slags to produce precipitated calcium carbonate, Appl. Energy 90(2012) 329-334.
[15] S.Y. Pan, J.S. Kinjal, Y.H. Chen, M.H. Wang, P.C. Chiang, Deployment of accelerated carbonation using alkaline solid wastes for carbon mineralization and utilization toward a circular economy, ACS Sustain. Chem. Eng. 5(2017) 6429-6437.
[16] S. Lee, J.W. Kim, S. Chae, J.H. Bang, S.W. Lee, CO₂ sequestration technology through mineral carbonation:an extraction and carbonation of blast slag, J. CO₂ Utilization 16(2016) 336-345.
[17] J.H. Bang, S.W. Lee, C.W. Jeon, S.W. Park, K.S. Song, W.J. Jo, S.C. Chae, Leaching of metal ions from blast furnace slag by using aqua Regia for CO₂ mineralization, Energies 9(2016) 996.
[18] J.P. Hu, W.Z. Liu, L. Wang, Q. Liu, F. Chen, H.R. Yue, B. Liang, L. Lü, Y. Wang, G.Q. Zhang, C. Li, Indirect mineral carbonation of blast furnace slag with (NH₄)₂SO₄ as a recyclable extractant, J. Energy Chem. 26(2017) 927-935.
[19] Q. Liu, W.Z. Liu, L. Lü, R.H. Li, B. Liang, H.R. Yue, S.W. Tang, C. Li, Study on reactions of gaseous P₂O₅ with Ca₃(PO₄)₂ and SiO₂ during a rotary kiln process for phosphoric acid production, Chin. J. Chem. Eng. 26(2018) 795-805.
[20] G.R. Chu, C. Li, W.Z. Liu, G.Q. Zhang, H.R. Yue, B. Liang, Y. Wang, D.M. Luo, Facile and cost-efficient indirect carbonation of blast furnace slag with multiple high value-added products through a completely wet process, Energy 166(2019) 1314-1322.
[21] L. Wang, W.Z. Liu, J.P. Hu, Q. Liu, H.R. Yue, B. Liang, G.Q. Zhang, D.M. Luo, H.P. Xie, C. Li, Indirect mineral carbonation of titanium-bearing blast furnace slag coupled with recovery of TiO₂ and Al₂O₃, Chin. J. Chem. Eng. 26(2018) 583-592.
[22] R.H. Matjie, R. Engelbrecht, Selective removal of dissolved silicon and aluminium ions from gas liquor by hydrometallurgical methods, Hydrometallurgy 85(2007) 172-182.
[23] L.G. Dyer, W.R. Richmond, P.D. Fawell, Simulation of iron oxide/silica precipitation in the paragoethite process for the removal of iron from acidic zinc leach solutions, Hydrometallurgy 119-120(2012) 47-54.
[24] H.X. Lai, L.Q. Huang, C.H. Lu, M. Fang, W.H. Ma, P.F. Xing, J.T. Li, X.T. Luo, Leaching behavior of impurities in Ca-alloyed metallurgical grade silicon, Hydrometallurgy 156(2015) 173-181.
[25] H. Lefler, Y. Zhang, Z.Z. Fang, M. Free, Z. Huang, Removal of silicon from highly acidic HCl medium to produce purified TiO₂, Hydrometallurgy 173(2017) 218-223.
[26] F.S. Xi, S.Y. Li, W.H. Ma, Z. Ding, Y. Lei, Z.J. Chen, K.X. Wei, K.Q. Xie, J.J. Wu, Removal of impurities from metallurgical grade silicon with metal assisted chemical leaching, Hydrometallurgy 178(2018) 250-255.
[27] W.Z. Liu, S. Yin, D.M. Luo, G.Q. Zhang, H.R. Yue, B. Liang, L.M. Wang, C. Li, Optimising the recovery of high-value-added ammonium alum during mineral carbonation of blast furnace slag, J. Alloys Compd. 774(2019) 1151-1159.
[28] Z.N. Tang, Production and Environmental Control of Titanium Pigment, first ed. Chemical Industry Publishing House, Beijing, 2000.
[29] X.F. Zhu, S.L. Zheng, Y. Zhang, Z.G.Z. Fang, M. Zhang, P. Sun, Q. Li, Y. Zhang, P. Li, W. Jin, Potentially more ecofriendly chemical pathway for production of highpurity TiO₂ from titanium slag, ACS Sustain. Chem. Eng. 7(5) (2019) 4821-4830.
[30] R. Kiyoura, K. Urano, Mechanism, kinetics, and equilibrium of thermal decomposition of ammonium sulfate, Ind. Eng. Chem. Process. Des. Dev. 9(4) (1970) 489-494.
[31] M. Jariwala, J. Crawford, D.J. Lecaptain, In situ Raman spectroscopic analysis of the regeneration of ammonium hydrogen sulfate from ammonium sulfate, Ind. Eng. Chem. Res. 46(14) (2007) 4900-4905.
[32] W.Z. Liu, L. Lü, H.R. Yue, B. Liang, C. Li, Combined production of synthetic rutile in the sulfate TiO₂ process, J. Alloys Compd. 705(2017) 572-580.
[33] Z.N. Lou, Y. Xiong, X.D. Feng, W.J. Shan, Y.C. Zhai, Study on the roasting and leaching behavior of high-sulfur bauxite using ammonium bisulfate, Hydrometallurgy 165(2016) 306-311.
[34] F.Q. Meng, W.Z. Liu, G.R. Chu, H.R. Yue, B. Liang, L.M. Wang, C. Li, Phase diagrams of (NH₄)₂SO₄-Al₂(SO₄)₃-H₂O ternary system:effect of sulfuric acid and its application in recovery of aluminum from coal fly ash, J. Chem. Eng. Data 64(2) (2019) 557-566.
[35] W.Z. Liu, F.Q. Meng, G.R. Chu, L.M. Wang, H.R. Yue, B. Liang, C. Li, Phase diagrams of the MgSO₄-Al₂(SO₄)₃-(NH₄)₂SO₄-H₂O system at 25 and 55℃ and their application in mineral carbonation, Fluid Phase Equilib. 473(2018) 226-235.
[36] C.C. Wang, P. Wang, Preparation and Characterization of Aluminum Ammonium Sulfate Dodecahydrate, Laboratory Science, http://en.cnki.com.cn/Article_en/CJFDTotal-YSKT201306003.htm2013.
[37] R. Liu, T.Y. Xue, J. Song, Y. Wang, T. Qi, J.K. Qu, A.L. Du, Removal of silicon in acid leaching and flocculation processes during zirconium oxychloride octahydrate production, Ceram. Int. 40(2014) 8801-8808.
[38] R.R. Xu, W.Q. Pang, J.H. Yu, Q.S. Huo, J.S. Chen, Chemistry-Zeolites and Porous Materials, second ed Sciences Editions, Science Press, Beijing, 2004.
[39] S.H. Liu, S. Jaenicke, G.K. Chuah, Hydrous zirconia as a selective catalyst for the Meerwein-Ponndorf-Verley reduction of cinnamaldehyde, J. Catal. 206(2002) 321-330.
[40] S.F. Weng, Fourier Transform Infrared Spectroscopy Analysis, second ed. Chemical Industry Press, Beijing, 2010. http://xueshu.baidu.com/usercenter/paper/show?paperid=2d7c95c22ba08a284ac8354478efbfe4&site=xueshu_se&sc_from=scu.

Simultaneous preparation of TiO₂ and ammonium alum, and microporous SiO₂ during the mineral carbonation of titanium-bearing blast furnace slag

Simultaneous preparation of TiO₂ and ammonium alum, and microporous SiO₂ during the mineral carbonation of titanium-bearing blast furnace slag

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Liwang Wang, Hualin Wang, Liang Ma, Zhanghuang Yang, Erwen Chen. Gas cyclone-liquid jet absorption separator used for treatment of tail gas containing HCl in titanium dioxide industry[J]. 中国化学工程学报, 2022, 44(4): 435-446.
[2]	Heping Xie, Yunpeng Wang, Tao Liu, Yifan Wu, Wenchuan Jiang, Cheng Lan, Zhiyu Zhao, Liangyu Zhu, Dongsheng Yang. Electrochemical CO₂ mineralization for red mud treatment driven by hydrogen-cycled membrane electrolysis[J]. 中国化学工程学报, 2022, 43(3): 14-23.
[3]	Tongyang Zhang, Guanrun Chu, Junlin Lyu, Yongda Cao, Wentao Xu, Kui Ma, Lei Song, Hairong Yue, Bin Liang. CO₂ mineralization of carbide slag for the production of light calcium carbonates[J]. 中国化学工程学报, 2022, 43(3): 86-98.
[4]	Patsakol Prayoonpunratn, Trin Jedsukontorn, Mali Hunsom. Photocatalytic activity of metal nanoparticle-decorated titanium dioxide for simultaneous H₂ production and biodiesel wastewater remediation[J]. 中国化学工程学报, 2021, 36(8): 86-100.
[5]	M. Ijaz Khan, Seifedine Kadry, Yuming Chu, M. Waqas. Modeling and numerical analysis of nanoliquid (titanium oxide, graphene oxide) flow viscous fluid with second order velocity slip and entropy generation[J]. 中国化学工程学报, 2021, 29(3): 17-25.
[6]	Muhammad A. Imran, Tiantian Li, Xuemei Wu, Xiaoming Yan, Abdul-Sammed Khan, Gaohong He. Sulfonated polybenzimidazole/amine functionalized titanium dioxide (sPBI/AFT) composite electrolyte membranes for high temperature proton exchange membrane fuel cells usage[J]. 中国化学工程学报, 2020, 28(9): 2425-2437.
[7]	Lan Lan, Yan Shao, Yilai Jiao, Rongxin Zhang, Christopher Hardacre, Xiaolei Fan. Systematic study of H₂ production from catalytic photoreforming of cellulose over Pt catalysts supported on TiO₂[J]. 中国化学工程学报, 2020, 28(8): 2084-2091.
[8]	Jionghua Xiang, Litao Zhu, Zhenghong Luo. Application of kinetics and computational fluid dynamics in pinene isomerization[J]. 中国化学工程学报, 2020, 28(8): 2111-2120.
[9]	Jinghang Li, Huimin Zang, Shun Yao, Zicheng Li, Hang Song. Photodegradation of benzothiazole ionic liquids catalyzed by titanium dioxide and silver-loaded titanium dioxide[J]. 中国化学工程学报, 2020, 28(5): 1397-1404.
[10]	Cong Luo, Kejing Wu, Hairong Yue, Yingying Liu, Yingming Zhu, Wei Jiang, Houfang Lu, Bin Liang. DBU-based CO₂ absorption-mineralization system: Reaction process, feasibility and process intensification[J]. 中国化学工程学报, 2020, 28(4): 1145-1155.
[11]	Songze Hao, Xuehui Zhao, Hongwei Zhang, Yun Wu, Cheng Fang, Xujia Wang. Effects of a novel bimetallic catalytic biofilter-based pretreatment technique on the form of ultrafiltration membrane fouling[J]. 中国化学工程学报, 2020, 28(10): 2513-2522.
[12]	Jue Li, Li Wang, Chunqiu Han, Fengyun Su, Yumin Leng, Liqun Ye. Industrial TiO₂ based nacreous pigments as functional building materials: Photocatalytic removal of NO[J]. 中国化学工程学报, 2020, 28(10): 2587-2591.
[13]	Jianqiu Gao, Chun Li, Weizao Liu, Jinpeng Hu, Lin Wang, Qiang Liu, Bin Liang, Hairong Yue, Guoquan Zhang, Dongmei Luo, Siyang Tang. Process simulation and energy integration in the mineral carbonation of blast furnace slag[J]. Chinese Journal of Chemical Engineering, 2019, 27(1): 157-167.
[14]	Abdus Samad, Shamim Ahsan, Ikki Tateishi, Mai Furukawa, Hideyuki Katsumata, Tohru Suzuki, Satoshi Kaneco. Indirect photocatalytic reduction of arsenate to arsenite in aqueous solution with TiO₂ in the presence of hole scavengers[J]. Chinese Journal of Chemical Engineering, 2018, 26(3): 529-533.
[15]	Lin Wang, Weizao Liu, Jingpeng Hu, Qiang Liu, Hairong Yue, Bin Liang, Guoquan Zhang, Dongmei Luo, Heping Xie, Chun Li. Indirect mineral carbonation of titanium-bearing blast furnace slag coupled with recovery of TiO₂ and Al₂O₃[J]. Chinese Journal of Chemical Engineering, 2018, 26(3): 583-592.