SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2022, Vol. 42 ›› Issue (2): 329-337.DOI: 10.1016/j.cjche.2021.03.027

• Regular • 上一篇    下一篇

Simulation and experiment of six-bed PSA process for air separation with rotating distribution valve

Tao Tian1, Yayan Wang2, Bing Liu2, Zhaoyang Ding2, Xinxi Xu1, Meisheng Shi1, Jun Ma1, Yanjun Zhang1, Donghui Zhang2   

  1. 1. Institute of Medical Support Technology, Academy of System Engineering of Academy of Military Science of Chinese PLA, Tianjin 300161, China;
    2. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
  • 收稿日期:2020-05-07 修回日期:2021-03-17 出版日期:2022-02-28 发布日期:2022-03-30
  • 通讯作者: Xinxi Xu,E-mail:xuxx1@sohu.com;Donghui Zhang,E-mail:donghuizhang@tju.edu.cn
  • 基金资助:
    This work is supported by Major military logistics research projects (AWS13Z006) and National Key Research and Development program of China (2017YFC0806404).

Simulation and experiment of six-bed PSA process for air separation with rotating distribution valve

Tao Tian1, Yayan Wang2, Bing Liu2, Zhaoyang Ding2, Xinxi Xu1, Meisheng Shi1, Jun Ma1, Yanjun Zhang1, Donghui Zhang2   

  1. 1. Institute of Medical Support Technology, Academy of System Engineering of Academy of Military Science of Chinese PLA, Tianjin 300161, China;
    2. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
  • Received:2020-05-07 Revised:2021-03-17 Online:2022-02-28 Published:2022-03-30
  • Contact: Xinxi Xu,E-mail:xuxx1@sohu.com;Donghui Zhang,E-mail:donghuizhang@tju.edu.cn
  • Supported by:
    This work is supported by Major military logistics research projects (AWS13Z006) and National Key Research and Development program of China (2017YFC0806404).

摘要: In this work, a six-bed pressure swing adsorption (PSA) process was investigated to produce medical oxygen from air, which uses the combination of six-way rotating distribution valve and PSA and has the main advantage of effectively saving space compared to the traditional two-bed or four-bed PSA process and can obtain greater productivity. The mathematical model of adsorption beds was developed based on the separation mechanism and the interaction among different equipment. Moreover, a pilot-scale device has been constructed to verify the accuracy of mathematical model by experiment. The oxygen product conformed to the medical standard (>93% (vol)) with a recovery of over 57%. Some related parameters were also discussed in detail, such as step time, ratio of length to the diameter, flow rate of product.

关键词: Pressure swing adsorption, Air separation, Mathematical modeling, Rotating distribution valve

Abstract: In this work, a six-bed pressure swing adsorption (PSA) process was investigated to produce medical oxygen from air, which uses the combination of six-way rotating distribution valve and PSA and has the main advantage of effectively saving space compared to the traditional two-bed or four-bed PSA process and can obtain greater productivity. The mathematical model of adsorption beds was developed based on the separation mechanism and the interaction among different equipment. Moreover, a pilot-scale device has been constructed to verify the accuracy of mathematical model by experiment. The oxygen product conformed to the medical standard (>93% (vol)) with a recovery of over 57%. Some related parameters were also discussed in detail, such as step time, ratio of length to the diameter, flow rate of product.

Key words: Pressure swing adsorption, Air separation, Mathematical modeling, Rotating distribution valve