SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2022, Vol. 48 ›› Issue (8): 202-210.DOI: 10.1016/j.cjche.2021.09.018

• • 上一篇    下一篇

Research on prediction model of formation temperature of ammonium bisulfate in air preheater of coal-fired power plant

Kai Zhang1, Fangming Xue2, Zhiqiang Wang1, Xingxing Cheng1   

  1. 1. School of Energy and Power Engineering, Shandong University, Jinan 250061, China;
    2. Huadian Electric Power Research Institute Co., Ltd., Hangzhou 310030, China
  • 收稿日期:2021-03-27 修回日期:2021-09-24 出版日期:2022-08-28 发布日期:2022-09-30
  • 通讯作者: Zhiqiang Wang,E-mail:jackywzq@sdu.edu.cn;Xingxing Cheng,E-mail:xcheng@sdu.edu.cn
  • 基金资助:
    The authors would like to thank the Key Research and Development Plan of Shandong Province (2019GSF109004) and Natural Science Foundation of Shandong Province (ZR2020ME190) for funding and supporting this work.

Research on prediction model of formation temperature of ammonium bisulfate in air preheater of coal-fired power plant

Kai Zhang1, Fangming Xue2, Zhiqiang Wang1, Xingxing Cheng1   

  1. 1. School of Energy and Power Engineering, Shandong University, Jinan 250061, China;
    2. Huadian Electric Power Research Institute Co., Ltd., Hangzhou 310030, China
  • Received:2021-03-27 Revised:2021-09-24 Online:2022-08-28 Published:2022-09-30
  • Contact: Zhiqiang Wang,E-mail:jackywzq@sdu.edu.cn;Xingxing Cheng,E-mail:xcheng@sdu.edu.cn
  • Supported by:
    The authors would like to thank the Key Research and Development Plan of Shandong Province (2019GSF109004) and Natural Science Foundation of Shandong Province (ZR2020ME190) for funding and supporting this work.

摘要: Ammonium bisulfate (ABS) is a viscous compound produced by the escape NH3 in the NO reduction process and SO3 in the flue gas at a certain temperature, which can cause the ash corrosion of the air preheater in coal-fired power plants. Therefore, it is essential to study the formation temperature of ABS to prevent the deposition of ABS in air preheaters. In this paper, the SO3 reaction kinetic model is used to analyze the SO3 generation process from coal combustion to the selective catalytic reduction (SCR) exit stage, and the kinetic model of NO reduction is used to analyze the NH3 escape process. A prediction model for calculating the ABS formation temperature based on the S content in coal and NO reduction parameters of the SCR is proposed, solving the difficulty of measuring SO3 concentration and NH3 concentration in the previous calculation equation of ABS formation temperature. And the reliability of the model is verified by the actual data of the power plant. Then the influence of S content in coal, NH3/ NOx molar ratio, different NOx concentrations at SCR inlet, and NO removal efficiency on the formation temperature of ABS are analyzed.

关键词: Air preheater, Ammonium bisulfate, ABS formation temperature, Reaction kinetics

Abstract: Ammonium bisulfate (ABS) is a viscous compound produced by the escape NH3 in the NO reduction process and SO3 in the flue gas at a certain temperature, which can cause the ash corrosion of the air preheater in coal-fired power plants. Therefore, it is essential to study the formation temperature of ABS to prevent the deposition of ABS in air preheaters. In this paper, the SO3 reaction kinetic model is used to analyze the SO3 generation process from coal combustion to the selective catalytic reduction (SCR) exit stage, and the kinetic model of NO reduction is used to analyze the NH3 escape process. A prediction model for calculating the ABS formation temperature based on the S content in coal and NO reduction parameters of the SCR is proposed, solving the difficulty of measuring SO3 concentration and NH3 concentration in the previous calculation equation of ABS formation temperature. And the reliability of the model is verified by the actual data of the power plant. Then the influence of S content in coal, NH3/ NOx molar ratio, different NOx concentrations at SCR inlet, and NO removal efficiency on the formation temperature of ABS are analyzed.

Key words: Air preheater, Ammonium bisulfate, ABS formation temperature, Reaction kinetics