SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2022, Vol. 50 ›› Issue (10): 301-309.DOI: 10.1016/j.cjche.2022.05.028

• Catalysis, Kinetics and Reaction Engineering • 上一篇    下一篇

Insight into the promotional mechanism of Cu modification towards wide-temperature NH3-SCR performance of NbCe catalyst

Dongqi An1, Yuyao Yang2, Weixin Zou3, Yandi Cai3, Qing Tong4, Jingfang Sun4, Lin Dong5   

  1. 1 Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering and Jiangsu Key Laboratory of Vehicle Emissions Control, Nanjing University, Nanjing 210093, China;
    2 Center for Nanochemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, China;
    3 Jiangsu Key Laboratory of Vehicle Emissions Control, School of Environment, Nanjing University, Nanjing 210093, China;
    4 Jiangsu Key Laboratory of Vehicle Emissions Control, Center of Modern Analysis, Nanjing University, Nanjing 210093, China;
    5 Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering and Jiangsu Key Laboratory of Vehicle Emissions Control, School of Environment, Center of Modern Analysis, Nanjing University, Nanjing 210093, China
  • 收稿日期:2022-03-20 修回日期:2022-05-19 出版日期:2022-10-28 发布日期:2023-01-04
  • 通讯作者: Jingfang Sun,E-mail:sunjf@nju.edu.cn;Lin Dong,E-mail:donglin@nju.edu.cn
  • 基金资助:
    Financial support from the National Natural Science Foundation of China, China (Nos. 21972062, 21976081, 21976111) is gratefully acknowledged.

Insight into the promotional mechanism of Cu modification towards wide-temperature NH3-SCR performance of NbCe catalyst

Dongqi An1, Yuyao Yang2, Weixin Zou3, Yandi Cai3, Qing Tong4, Jingfang Sun4, Lin Dong5   

  1. 1 Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering and Jiangsu Key Laboratory of Vehicle Emissions Control, Nanjing University, Nanjing 210093, China;
    2 Center for Nanochemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, China;
    3 Jiangsu Key Laboratory of Vehicle Emissions Control, School of Environment, Nanjing University, Nanjing 210093, China;
    4 Jiangsu Key Laboratory of Vehicle Emissions Control, Center of Modern Analysis, Nanjing University, Nanjing 210093, China;
    5 Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering and Jiangsu Key Laboratory of Vehicle Emissions Control, School of Environment, Center of Modern Analysis, Nanjing University, Nanjing 210093, China
  • Received:2022-03-20 Revised:2022-05-19 Online:2022-10-28 Published:2023-01-04
  • Contact: Jingfang Sun,E-mail:sunjf@nju.edu.cn;Lin Dong,E-mail:donglin@nju.edu.cn
  • Supported by:
    Financial support from the National Natural Science Foundation of China, China (Nos. 21972062, 21976081, 21976111) is gratefully acknowledged.

摘要: A simple strategy of Cu modification was proposed to broaden the operation temperature window for NbCe catalyst. The best catalyst Cu0.010/Nb1Ce3 presented over 90% NO conversion in a wide temperature range of 200-400 ℃ and exhibited an excellent H2O or/and SO2 resistance at 275 ℃. To understand the promotional mechanism of Cu modification, the correlation among the “activity-structure-property” were tried to establish systematically. Cu species highly dispersed on NbCe catalyst to serve as the active component. The strong interaction among Cu, Nb and Ce promoted the emergence of NbO4 and induced more Brønsted acid sites. And Cu modification obviously enhanced the redox behavior of the NbCe catalyst. Besides, EPR probed the Cu species exited in the form of monomeric and dimeric Cu2+, the isolated Cu2+ acted as catalytic active sites to promote the reaction: Cu2+-NO3-+NO(g) → Cu2+-NO2-+NO2(g). Then the generated NO2 would accelerate the fast-SCR reaction process and thus facilitated the low-temperature deNO efficiency. Moreover, surface nitrates became unstable and easy to decompose after Cu modification, thus providing additional adsorption and activation sites for NH3, and ensuring the improvement of catalytic activity at high temperature. Since the NH3-SCR reaction followed by E-R reaction pathway efficaciously over Cu0.010/Nb1Ce3 catalyst, the excellent H2O and SO2 resistance was as expected.

关键词: NH3-SCR, NbCe catalyst, Cu modification, NO2 promoting effect, Fast-SCR, Flue gas

Abstract: A simple strategy of Cu modification was proposed to broaden the operation temperature window for NbCe catalyst. The best catalyst Cu0.010/Nb1Ce3 presented over 90% NO conversion in a wide temperature range of 200-400 ℃ and exhibited an excellent H2O or/and SO2 resistance at 275 ℃. To understand the promotional mechanism of Cu modification, the correlation among the “activity-structure-property” were tried to establish systematically. Cu species highly dispersed on NbCe catalyst to serve as the active component. The strong interaction among Cu, Nb and Ce promoted the emergence of NbO4 and induced more Brønsted acid sites. And Cu modification obviously enhanced the redox behavior of the NbCe catalyst. Besides, EPR probed the Cu species exited in the form of monomeric and dimeric Cu2+, the isolated Cu2+ acted as catalytic active sites to promote the reaction: Cu2+-NO3-+NO(g) → Cu2+-NO2-+NO2(g). Then the generated NO2 would accelerate the fast-SCR reaction process and thus facilitated the low-temperature deNO efficiency. Moreover, surface nitrates became unstable and easy to decompose after Cu modification, thus providing additional adsorption and activation sites for NH3, and ensuring the improvement of catalytic activity at high temperature. Since the NH3-SCR reaction followed by E-R reaction pathway efficaciously over Cu0.010/Nb1Ce3 catalyst, the excellent H2O and SO2 resistance was as expected.

Key words: NH3-SCR, NbCe catalyst, Cu modification, NO2 promoting effect, Fast-SCR, Flue gas