SCI和EI收录∣中国化工学会会刊

Chinese Journal of Chemical Engineering ›› 2015, Vol. 23 ›› Issue (8): 1256-1265.DOI: 10.1016/j.cjche.2015.04.001

• 流体力学与传递现象 • 上一篇    下一篇

Turbulent forced convection in a heat exchanger square channel with wavy-ribs vortex generator

Amnart Boonloi1, Withada Jedsadaratanachai2   

  1. 1 Department of Mechanical Engineering Technology, College of Industrial Technology, King Mongkut's University of Technology North Bangkok, Bangkok 10800, Thailand;
    2 Department of Mechanical Engineering, Faculty of Engineering, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand
  • 收稿日期:2014-04-25 修回日期:2014-09-17 出版日期:2015-08-28 发布日期:2015-09-26
  • 通讯作者: Withada Jedsadaratanachai
  • 基金资助:

    Supported by College of Industrial Technology, King Mongkut's University of Technology North Bangkok, Thailand.

Turbulent forced convection in a heat exchanger square channel with wavy-ribs vortex generator

Amnart Boonloi1, Withada Jedsadaratanachai2   

  1. 1 Department of Mechanical Engineering Technology, College of Industrial Technology, King Mongkut's University of Technology North Bangkok, Bangkok 10800, Thailand;
    2 Department of Mechanical Engineering, Faculty of Engineering, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand
  • Received:2014-04-25 Revised:2014-09-17 Online:2015-08-28 Published:2015-09-26
  • Contact: Withada Jedsadaratanachai
  • Supported by:

    Supported by College of Industrial Technology, King Mongkut's University of Technology North Bangkok, Thailand.

摘要: Turbulent forced convective heat transfer and flow configurations in a square channel with wavy-ribs inserted diagonally are examined numerically. The influences of the 30° and 45° flowattack angles forwavy-ribs, blockage ratio, RB=b/H=0.05-0.25with single pitch ratio, RP=P/H=1 are investigated for the Reynolds number based on the hydraulic diameter of the square channel, Re=3000-20000. The use of the wavy-ribs, which inserted diagonal in the square channel, is aimed to help to improve the thermal performance in heat exchange systems. The finite volume method and SIMPLE algorithm are applied to the present numerical simulation. The results are presented on the periodic flow and heat transfer profiles, flow configurations, heat transfer characteristics and the performance evaluations. The mathematical results reveal that the use of wavy-ribs leads to a higher heat transfer rate and friction loss over the smooth channel. The heat transfer enhancements are around 1.97-5.14 and 2.04-5.27 times over the smooth channel for 30° and 45° attack angles, respectively. However, the corresponding friction loss values for 30° and 45° are around 4.26-86.55 and 5.03-97.98 times higher than the smooth square channel, respectively. The optimumthermal enhancement factor on both cases is found at RB=0.10 and the lowest Reynolds number, Re=3000, to be about 1.47 and 1.52, respectively, for 30° and 45° wavy-ribs.

关键词: Flow configuration, Forced convection, Heat transfer characteristic, Turbulent flow, Wavy-ribs

Abstract: Turbulent forced convective heat transfer and flow configurations in a square channel with wavy-ribs inserted diagonally are examined numerically. The influences of the 30° and 45° flowattack angles forwavy-ribs, blockage ratio, RB=b/H=0.05-0.25with single pitch ratio, RP=P/H=1 are investigated for the Reynolds number based on the hydraulic diameter of the square channel, Re=3000-20000. The use of the wavy-ribs, which inserted diagonal in the square channel, is aimed to help to improve the thermal performance in heat exchange systems. The finite volume method and SIMPLE algorithm are applied to the present numerical simulation. The results are presented on the periodic flow and heat transfer profiles, flow configurations, heat transfer characteristics and the performance evaluations. The mathematical results reveal that the use of wavy-ribs leads to a higher heat transfer rate and friction loss over the smooth channel. The heat transfer enhancements are around 1.97-5.14 and 2.04-5.27 times over the smooth channel for 30° and 45° attack angles, respectively. However, the corresponding friction loss values for 30° and 45° are around 4.26-86.55 and 5.03-97.98 times higher than the smooth square channel, respectively. The optimumthermal enhancement factor on both cases is found at RB=0.10 and the lowest Reynolds number, Re=3000, to be about 1.47 and 1.52, respectively, for 30° and 45° wavy-ribs.

Key words: Flow configuration, Forced convection, Heat transfer characteristic, Turbulent flow, Wavy-ribs