High-Thermal Conductive Coating Used on Metal Heat Exchanger

doi:10.1016/S1004-9541(14)60068-9

Chinese Journal of Chemical Engineering ›› 2014, Vol. 22 ›› Issue (5): 596-601.DOI: 10.1016/S1004-9541(14)60068-9

• 催化、动力学与反应工程 • 上一篇下一篇

High-Thermal Conductive Coating Used on Metal Heat Exchanger

李静, 梁剧, 刘业明

School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510640, China

收稿日期:2013-05-08 修回日期:2013-08-27 出版日期:2014-05-28 发布日期:2014-05-06
通讯作者: LI Jing,E-mail: ljing@scut.edu.cn
基金资助:
Supported by the State Key Development of Basic Research of China (2001CB710703), the National Natural Science Foundation of China (51176053), the Key Technologies R&D Program of Guangdong Province (2011B090400562), the Strategic Emerging Industry Special Funds of Guangdong Province (2012A080304015), and the Key Technologies R&D Program of Guangzhou City (2010U1-D00221, 2011Y5000006).

High-Thermal Conductive Coating Used on Metal Heat Exchanger

LI Jing, LIANG Ju, LIU Yeming

School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510640, China

Received:2013-05-08 Revised:2013-08-27 Online:2014-05-28 Published:2014-05-06
Supported by:
Supported by the State Key Development of Basic Research of China (2001CB710703), the National Natural Science Foundation of China (51176053), the Key Technologies R&D Program of Guangdong Province (2011B090400562), the Strategic Emerging Industry Special Funds of Guangdong Province (2012A080304015), and the Key Technologies R&D Program of Guangzhou City (2010U1-D00221, 2011Y5000006).

摘要/Abstract

摘要： Based on modified silicon polyester resin in addition to several functional fillers such as corrosion-resistant fillers, heat-resistant fillers and thermal conductive fillers, a high thermal conductive coating can be made. On the basis of boronnitride (BN) and aluminum nitride (AIN) used as thermal conductive fillers and by means of the testing system of hot disk and heat transfer experiment, researches on the varieties of thermal conductive fillers and the effects of the contents of high-thermal conductive coating have been done, which shows that the thermal conductivity of coating increases with the increase of the quality fraction and the coefficient of thermal conductivity of the thermal conductive fillers of coating. With guaranteeing better heat resistance, stronger corrosion resistance and adhesive force, the coefficient of coating can reach a level as high as 3 W·m^-1·K^-1.

关键词: thermal conductivity, heat exchanger, coating

Abstract: Based on modified silicon polyester resin in addition to several functional fillers such as corrosion-resistant fillers, heat-resistant fillers and thermal conductive fillers, a high thermal conductive coating can be made. On the basis of boronnitride (BN) and aluminum nitride (AIN) used as thermal conductive fillers and by means of the testing system of hot disk and heat transfer experiment, researches on the varieties of thermal conductive fillers and the effects of the contents of high-thermal conductive coating have been done, which shows that the thermal conductivity of coating increases with the increase of the quality fraction and the coefficient of thermal conductivity of the thermal conductive fillers of coating. With guaranteeing better heat resistance, stronger corrosion resistance and adhesive force, the coefficient of coating can reach a level as high as 3 W·m^-1·K^-1.

Key words: thermal conductivity, heat exchanger, coating

李静, 梁剧, 刘业明. High-Thermal Conductive Coating Used on Metal Heat Exchanger[J]. Chinese Journal of Chemical Engineering, 2014, 22(5): 596-601.

LI Jing, LIANG Ju, LIU Yeming. High-Thermal Conductive Coating Used on Metal Heat Exchanger[J]. Chin.J.Chem.Eng., 2014, 22(5): 596-601.

参考文献

1 Guan, Z.Z., "Study of high temperature anti-corrosion coating on heat exchanger", Master Thesis, South China University of Technology, China (2010). (in Chinese)

2 Zhou, H.H., "Present Situation and Development of Anticorrosion Coatings in China", Surface Technology, 31 (1), 5-8 (2002). (in Chinese)

3 Yang, L., Wang, X., "Research progress of anti-corrosion coatings", Guizhou agricultural mechanization, 35, 35-38 (2008). (in Chinese)

4 Leivo, E.M., Kellberg, T.H., Kolari, M.J., "Structure and thermal conductivity of flame sprayed polyamide 11 coatings filled with Al₂O₃, AlN and BN Ceramics", In: Proceedings of the 2nd International Thermal Spray Conference, Berndt, C.C., ed., ASM International, Singapore, 327-330 (2001).

5 Xin, L., Gu, X., Hofstra, P.G., Bajcar, R.C., "Moisture-absorption, dielectric relaxation, and thermal conductivity studies of polymer composites", Journal of Polymer Science, 36 (13), 2259-2265 (1998).

6 Fukushima, H., Drzal, L.T., Rook, B.P., Rich, M.J., "Thermal conductivity of exfoliated graphite nanocomposites", Journal of Thermal Analysis and Calorimetry, 75 (1), 235-238 (2006).

7 Zhou, W.Y., Qi, S.H., Wang, C.F., Guo, J., "High temperature and insulating heat conductive coating", Acta Materiae Compositae Sinica, 24 (2), 28-31 (2007).

8 Chung, D.D.L., "Thermal interface materials", Journal of Materials Engineering and Properties, 10, 56-59 (2001).

9 Yang, S.M., Heat Transfer Theory, Higher Education Press, Beijing, 45-57 (1987). (in Chinese)

10 Zhong, S.Y., Wang, J., Fluid Mechanics and Thermal Theories, China Machine Press, Beijing, 45-47 (2011). (in Chinese)Martan, J., Semmar, N., Leborgne, C., Menn, E.L., Mathias, J., "Thermal properties characterization of conductive thin films and surfaces by pulsed lasers", Applied Surface Science, 247, 57-63 (2005).

[1]	Shengfeng Luo, Song Zhang, Yiping Zeng, Hui Zhang, Lili Zheng, Zhaopeng Xu. Study on oxygen transport and titanium oxidation in coating cracks under parallel gas flow based on LBM modelling[J]. 中国化学工程学报, 2023, 56(4): 15-24.
[2]	Jianhui Zhou, Guohao Du, Jianfeng Hu, Xin Lai, Shan Liu, Zhengguo Zhang. The establishment of Boron nitride@sodium alginate foam/polyethyleneglycol composite phase change materials with high thermal conductivity, shape stability, and reusability[J]. 中国化学工程学报, 2023, 54(2): 11-21.
[3]	Siwen Gu, Lei Zhang, Yu Zhuang, Weida Li, Jian Du, Cheng Shao. Two-tier control structure design methodology applied to heat exchanger networks[J]. 中国化学工程学报, 2022, 47(7): 231-244.
[4]	Jun Pan, Xianli Xu, Zhaohui Wang, Shi-Peng Sun, Zhaoliang Cui, Lassaad Gzara, Iqbal Ahmed, Omar Bamaga, Mohammed Albeirutty, Enrico Drioli. Innovative hydrophobic/hydrophilic perfluoropolyether (PFPE)/polyvinylidene fluoride (PVDF) composite membrane for vacuum membrane distillation[J]. 中国化学工程学报, 2022, 45(5): 248-257.
[5]	N. M'hanni, T. Anik, R. Touir, M. Galai, M. Ebn Touhami, E.H. Rifi, Z. Asfari, S. Bakkali. Effect of additives on nickel-phosphorus deposition obtained by electroless plating: Characterization and corrosion resistance in 3%(mass) sodium chloride medium[J]. 中国化学工程学报, 2022, 44(4): 341-350.
[6]	Mehdi Miansari, Mehdi Rajabtabar Darvishi, Davood Toghraie, Pouya Barnoon, Mojtaba Shirzad, As'ad Alizadeh. Numerical investigation of grooves effects on the thermal performance of helically grooved shell and coil tube heat exchanger[J]. 中国化学工程学报, 2022, 44(4): 424-434.
[7]	Shabnam Ghahremanian, Abbas Abbassi, Zohreh Mansoori, Davood Toghraie. Effect of copper nanoparticles on thermal behavior of two-phase argon-copper nanofluid flow in rough nanochannels with focusing on the interface properties and heat transfer using molecular dynamics simulation[J]. 中国化学工程学报, 2022, 42(2): 344-350.
[8]	Jie Wang, Ling Zhang, Chunzhong Li. Superhydrophobic and mechanically robust polysiloxane composite coatings containing modified silica nanoparticles and PS-grafted halloysite nanotubes[J]. 中国化学工程学报, 2022, 52(12): 56-65.
[9]	Zhenhao Shen, Chongwei Ma, Darui Wang, Junlin He, Hongmin Sun, Zhirong Zhu, Weimin Yang. Shape-selective alkylation of benzene with ethylene over a core-shell ZSM-5@MCM-41 composite material[J]. 中国化学工程学报, 2021, 37(9): 64-71.
[10]	Le Li, Yansheng Zhao, Wenhao Lian, Chun Han, Qian Zhang, Wei Huang. Review on the effect of heat exchanger tubes on flow behavior and heat/mass transfer of the bubble/slurry reactors[J]. 中国化学工程学报, 2021, 35(7): 44-61.
[11]	Yang Liu, Yangbo Deng, Junrui Shi, Rujie Xiao, Houping Li. Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner[J]. 中国化学工程学报, 2021, 34(6): 87-96.
[12]	Bee Huah Lim, Edy Herianto Majlan, Ahmad Tajuddin, Teuku Husaini, Wan Ramli Wan Daud, Nabilah Afiqah Mohd Radzuan, Md. Ahsanul Haque. Comparison of catalyst-coated membranes and catalyst-coated substrate for PEMFC membrane electrode assembly: A review[J]. 中国化学工程学报, 2021, 33(5): 1-16.
[13]	Yanna Wu, Jianxian Zeng, Yajie Zeng, Hu Zhou, Guoqing Liu, Jian Jian, Jie Ding. Polyethersulfone-polyvinylpyrrolidone composite membranes: Effects of polyvinylpyrrolidone content and polydopamine coating on membrane morphology, structure and performances[J]. 中国化学工程学报, 2021, 38(10): 84-97.
[14]	Lihua Qian, Guojun Lan, Xiaoyan Liu, Zhenqing Li, Ying Li. Aqueous-phase hydrogenation of levulinic acid over carbon layer protected silica-supported cobalt-ruthenium catalysts[J]. 中国化学工程学报, 2021, 38(10): 114-122.
[15]	Qinggele Borjihan, Quanfu Yao, Huihui Qu, Haixia Wu, Ying Liu, Alideertu Dong. Glycopolymer N-halamine-modified biochars with high specificity for Escherichia coli eradication[J]. 中国化学工程学报, 2021, 38(10): 229-236.

High-Thermal Conductive Coating Used on Metal Heat Exchanger

High-Thermal Conductive Coating Used on Metal Heat Exchanger

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价