Application of diffusive transport model for better insight into retardation mechanisms involved in ion-imprinted membrane transport

摘要/Abstract

摘要： Heavy metal removal from water is a great concern for environmentalists and engineers. Ion-imprinted membranes are among the state of the art technologies for selective adsorption of heavy metals from aqueous environment. Dialysis permeation of nickel ions through Ni(II)-imprinted membranes has been thermodynamically studied in our prior work. In current study, the diffusive transport model was developed and then applied for better insight into the retardation mechanisms involved in the ion-imprinted membrane transport. The Sips isotherm model was coupled with the transport model to obtain the governing equation. Chemisorption and physical interactions (bulk diffusion and pore-clogging) were the most probable retardation mechanisms according to the modeling results. Relative retardation factor (η) was also defined as; transport-rate controlled by chemical adsorption to that controlled by physical interactions. With the help of the retardation factor, it was understood that the membrane behavior gradually changes from chemisorption to facilitated transport during permeation time. Effect of important operating parameters such as time, temperature and concentration on transport behavior was also investigated. Results indicated that chemisorption rate is rather higher at lower concentrations, early permeation times and reduced temperatures. In addition, η tabulated greater values for Ni(II) compared to Co(II) due to the imprinting effect.

关键词: Ion-imprinted membrane, Mathematical modeling, Chemisorption, Retardation mechanism

Abstract: Heavy metal removal from water is a great concern for environmentalists and engineers. Ion-imprinted membranes are among the state of the art technologies for selective adsorption of heavy metals from aqueous environment. Dialysis permeation of nickel ions through Ni(II)-imprinted membranes has been thermodynamically studied in our prior work. In current study, the diffusive transport model was developed and then applied for better insight into the retardation mechanisms involved in the ion-imprinted membrane transport. The Sips isotherm model was coupled with the transport model to obtain the governing equation. Chemisorption and physical interactions (bulk diffusion and pore-clogging) were the most probable retardation mechanisms according to the modeling results. Relative retardation factor (η) was also defined as; transport-rate controlled by chemical adsorption to that controlled by physical interactions. With the help of the retardation factor, it was understood that the membrane behavior gradually changes from chemisorption to facilitated transport during permeation time. Effect of important operating parameters such as time, temperature and concentration on transport behavior was also investigated. Results indicated that chemisorption rate is rather higher at lower concentrations, early permeation times and reduced temperatures. In addition, η tabulated greater values for Ni(II) compared to Co(II) due to the imprinting effect.

Key words: Ion-imprinted membrane, Mathematical modeling, Chemisorption, Retardation mechanism

中图分类号:

10.1016/j.cjche.2016.04.034

Ehsan Salehi. Application of diffusive transport model for better insight into retardation mechanisms involved in ion-imprinted membrane transport[J]. , 2016, 24(9): 1161-1165.

参考文献

[1] S.S. Madaeni, H.R. Godini, Transfer characterization of charged particles through charged conductive membrane via dialysis process, J. Porous. Mater. 15(4) (2008) 467-473.
[2] M.S. Hall, V.M. Starov, D.R. Loyd, Reverse osmosis of multicomponent electrolyte solution:Part I. Theoretical development, J. Membr. Sci. 128(1) (1997) 23-27.
[3] R.J. Hill, Electric-field-enhanced transport in polyacrylamide hydrogel nanocomposites, J. Colloid Interface Sci. 316(2) (2007) 635-644.
[4] R.S. Vieira, E. Guibal, E.A. Silva, Beppu MM. Adsorption and desorption of binary mixtures of copper and mercury ions on natural and crosslinked chitosan membranes, Adsorption 13(5) (2007) 603-611.
[5] M.M. Beppu, E.J. Arrud, R.S. Vieira, N.N. Santos, Adsorption of Cu(II) on porous chitosan membranes functionalized with histidine, J. Membr. Sci. 240(1-2) (2004) 227-235.
[6] A.G. Boricha, Z.V.P. Murthy, Acrylonitrile butadiene styrene/chitosan blend membranes:Preparation, characterization and performance for the separation of heavy metals, J. Membr. Sci. 339(1-2) (2009) 239-249.
[7] C. Liu, R. Bai, Adsorptive removal of copper ionswith highly porous chitosan/cellulose acetate blend hollow fiber membranes, J. Membr. Sci. 284(1-2) (2006) 313-322.
[8] Z. Cheng, X. Liu, M. Han, W. Ma, Adsorption kinetic character of copper ions onto a modified chitosan transparent thin membrane from aqueous solution, J. Hazard. Mater. 182(1-3) (2010) 408-415.
[9] F. Cattoli, C. Boi, M. Sorci, G.C. Sarti, Adsorption of pure recombinant MBP-fusion proteins on amylose affinity membranes, J. Membr. Sci. 273(1-2) (2006) 2-11.
[10] C. Boi, S. Dimartino, G.C. Sarti, Modeling and simulation of affinity membrane adsorption, J. Chromatogr. A 1162(1) (2007) 24-33.
[11] X.Wang, L. Zhang, C. Ma, R. Song, H. Hou, D. Li, Enrichment and separation of silver fromwaste solutions by metal ion imprintedmembrane, Hydrometallurgy 100(1-2) (2009) 82-86.
[12] J.H. Chen, G.P. Li, Q.L. Lio, J.C. Ni, W.B. Wo, J.M. Lin, Cr(III) ionic imprinted polyvinyl alcohol/sodium alginate (PVA/SA) porous composite membranes for selective adsorption of Cr(III) ions, Chem. Eng. J. 165(2) (2010) 465-473.
[13] V. Vatanpour, S.S. Madaeni, S. Zinadini, H.R. Rajabi, Development of ion imprinted technique for designing nickel ion selective membrane, J. Membr. Sci. 373(1-2) (2011) 36-42.
[14] H. Su, J. Li, T. Tan, Adsorption mechanism for imprinted ion (Ni²⁺) of the surface molecular imprinting adsorbent (SMIA), Biochem. Eng. J. 39(3) (2008) 503-509.
[15] E. Salehi, S.S. Madaeni, V. Vatanpour, Thermodynamic investigation and mathematical modeling of ion-imprinted membrane adsorption, J. Membr. Sci. 389(1-2) (2012) 334-342.