[1] T.J. Bandosz, C.O. Ania, Activated carbon surfaces in environmental remediation, Interface Sci. Technol. 7(2006) 159-229.[2] N. Mohamad Nor, L.C. Lau, K.T. Lee, A.R. Mohamed, Synthesis of activated carbon from lignocellulosic biomass and its applications in air pollution control-A review, J. Environ. Chem. Eng. 1(2013) 658-666.[3] N. Karatepe, I. Orbak, R. Yavuz, A. Ozyuguran, Sulfur dioxide adsorption by activated carbons having different textural and chemical properties, Fuel 87(2008) 3207-3215.[4] R. Pedicini, A. Sacc, A. Carbone, E. Passalacqua, Hydrogen storage based on polymeric material, Int. J. Hydrog. Energy 36(2011) 9062-9068.[5] H. Yu, K. Zhang, C. Rossi, Theoretical study on photocatalytic oxidation of VOCs using nano-TiO2 photocatalyst, J. Photochem. Photobiol. A Chem. 188(2007) 65-73.[6] S. Vardharajula, S.Z. Ali, P.M. Tiwari, E. Eroglu, K. Vig, V.A. Dennis, S.R. Singh, Functionalized carbon nanotubes:Biomedical applications, Int. J. Nanomedicine 7(2012) 5361-5374.[7] F. Gironi, V. Piemonte, VOCs removal from dilute vapour streams by adsorption onto activated carbon, Chem. Eng. J. 172(2011) 671-677.[8] T. Dobre, O.C. Parvulescu, G. Iavorschi, M. Stroescu, A. Stoica, Volatile organic compounds removal from gas streams by adsorption onto activated carbon, Ind. Eng. Chem. Res. 53(2014) 3622-3628.[9] G.R. Parmar, N.N. Rao, Emerging control technologies for volatile organic compounds, Crit. Rev. Environ. Sci. Technol. 39(2008) 41-78.[10] K. Yang, J. Peng, C. Srinivasakannan, L. Zhang, H. Xia, X. Duan, Preparation of high surface area activated carbon from coconut shells using microwave heating, Bioresour. Technol. 101(2010) 6163-6169.[11] D. Das, V. Gaur, N. Verma, Removal of volatile organic compound by activated carbon fiber, Carbon N. Y. 42(2004) 2949-2962.[12] C. Long, Y. Li, W. Yu, A. Li, Removal of benzene and methyl ethyl ketone vapor:Comparison of hypercrosslinked polymeric adsorbent with activated carbon, J. Hazard. Mater. 203-204(2012) 251-256.[13] W. Shen, J. Zheng, Z. Qin, J. Wang, Preparation of mesoporous carbon from commercial activated carbon with steam activation in the presence of cerium oxide, J. Colloid Interface Sci. 264(2003) 467-473.[14] H.M. Williams, E.A. Dawson, P.A. Barnes, G.M.B. Parkes, L.A. Pears, C.J. Hindmarsh, A new low temperature approach to developing mesoporosity in metal-doped carbons for adsorption and catalysis, J. Porous. Mater. 16(2009) 557-564.[15] A. Oya, S. Yoshida, J. Alcaniz-Monge, A. Linares-Solano, Formation of mesopores in phenolic resin-derived carbon fiber by catalytic activation using cobalt, Carbon N. Y. 33(1995) 1085-1090.[16] G. Gong, Q. Xie, Y. Zheng, S. Ye, Y. Chen, Regulation of pore size distribution in coalbased activated carbon, Carbon N. Y. 47(2009) 2942.[17] S. Kang, J. Jian-chun, C. Dan-dan, Preparation of activated carbon with highly developed mesoporous structure from Camellia oleifera shell through water vapor gasification and phosphoric acid modification, Biomass Bioenergy 35(2011) 3643-3647.[18] J. Guo, A.C. Lua, Preparation of activated carbons from oil-palm-stone chars by microwave-induced carbon dioxide activation, Carbon N. Y. 38(2000) 1985-1993.[19] J. Georgin, G.L. Dotto, M.A. Mazutti, E.L. Foletto, Preparation of activated carbon from peanut shell by conventional pyrolysis and microwave irradiation-pyrolysis to remove organic dyes from aqueous solutions, J. Environ. Chem. Eng. 4(2016) 266-275.[20] Qing-Song Liu, Tong Zheng, Nan Li, Peng Wang, Gulizhaer Abulikemu, Modification of bamboo-based activated carbon using microwave radiation and its effects on the adsorption of methylene blue, Appl. Surf. Sci. 256(2010) 3309-3315.[21] A.C. Lua, J. Guo, Activated carbon prepared from oil palm stone by one-step CO2 activation for gaseous pollutant removal, Carbon N. Y. 38(2000) 1089-1097.[22] S.G. Herawan, M.S. Hadi, M.R. Ayob, A. Putra, Characterization of activated carbons from oil-palm shell by CO2 activation with no holding carbonization temperature, Sci. World J. 2013(2013) 5-7.[23] F. Rodrlguez-Reinoso, M. Molina-Sabio, M.T. Gonzalez, The use of steam and CO2 as activating agents in the preparation of activated carbons, Carbon N. Y. 33(1995).[24] H. Feng Lu, J. Jing Cao, Y. Zhou, D. Li Zhan, Y. Fei Chen, Novel hydrophobic PDVB/RSiO2 for adsorption of volatile organic compounds from highly humid gas stream, J. Hazard. Mater. 262(2013) 83-90.[25] I.K. Shah, P. Pre, B.J. Alappat, Effect of thermal regeneration of spent activated carbon on volatile organic compound adsorption performances, J. Taiwan Inst. Chem. Eng. 45(2014) 1733-1738.[26] C.A. Basar, Applicability of the various adsorption models of three dyes adsorption onto activated carbon prepared waste apricot, J. Hazard. Mater. 135(2006) 232-241.[27] J. Benkhedda, J.N. Jaubert, D. Barth, L. Perrin, Experimental and modeled results describing the adsorption of toluene onto activated carbon, J. Chem. Eng. Data 45(2000) 650-653.[28] W. Kast, Principles of adsorption and adsorption processes, Chem. Eng. Process. Process Intensif. 19(1985) 118.[29] S.D. Manjare, A.K. Ghoshal, Adsorption equilibrium studies for ethyl acetate vapor and E-Merck 13X molecular sieve system, Sep. Purif. Technol. 51(2006) 118-125.[30] R. Okayama, Y. Amano, M. Machida, Effect of nitrogen species on an activated carbon surface on the adsorption of Cu(Ⅱ) ions from aqueous solution, Carbon N. Y. 48(2010) 45-50.[31] S. Guo, J. Peng, W. Li, K. Yang, L. Zhang, S. Zhang, H. Xia, Effects of CO2 activation on porous structures of coconut shell-based activated carbons, Appl. Surf. Sci. 255(2009) 8443-8449.[32] D. Adinata, W.M.A. Wan Daud, M.K. Aroua, Preparation and characterization of activated carbon from palm shell by chemical activation with K2CO3, Bioresour. Technol. 98(2007) 145-149.[33] M. East, Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution[J], Pure & Applied Chemistry 87(9) (2015) 25-25, http://dx.doi.org/10.1515/pac-2014-1117.[34] Y. Liu, L. He, X. Lu, P. Xiao, Transmission electron microscopy study of the microstructure of carbon/carbon composites reinforced with in situ grown carbon nanofibers, Carbon N. Y. 50(2012) 2424-2430.[35] N. Byamba-Ochir, W.G. Shim, M.S. Balathanigaimani, H. Moon, Highly porous activated carbons prepared from carbon rich Mongolian anthracite by direct NaOH activation, Appl. Surf. Sci. 379(2016) 331-337.[36] C.C. Huang, H.S. Li, C.H. Chen, Effect of surface acidic oxides of activated carbon on adsorption of ammonia, J. Hazard. Mater. 159(2008) 523-527. |