Effect of vacuum gas oil hydrotreating reactor on multiple reactors and hydrogen network

doi:10.1016/j.cjche.2019.01.014

摘要/Abstract

摘要： The inlet temperature of the Vacuum Gas Oil (VGO) hydrotreating reactor of a refinery is analyzed with the integration of multiple series reactors and hydrogen network considered. The effect of the inlet temperature (T₁) on hydrogen sinks/sources and the product output is analyzed systematically based on the simulation of the series reactors, including VGO hydrotreating reactor, hydrocracking reactor, fluid catalytic cracking reactor and visbreaking reactor. The general relation between the Hydrogen Utility Adjustment (HUA) and multiple pairs of varying sinks and sources is deduced, and correlations between varying streams and T₁ are linearly fitted. Based on this, the quantitative equation between HUA and T₁ is derived, and corresponding diagram is constructed. The T₁ corresponding the minimum hydrogen consumption is identified to be 345℃.

关键词: VGO hydrotreating, Reactors, Temperature, Hydrogen consumption

Abstract: The inlet temperature of the Vacuum Gas Oil (VGO) hydrotreating reactor of a refinery is analyzed with the integration of multiple series reactors and hydrogen network considered. The effect of the inlet temperature (T₁) on hydrogen sinks/sources and the product output is analyzed systematically based on the simulation of the series reactors, including VGO hydrotreating reactor, hydrocracking reactor, fluid catalytic cracking reactor and visbreaking reactor. The general relation between the Hydrogen Utility Adjustment (HUA) and multiple pairs of varying sinks and sources is deduced, and correlations between varying streams and T₁ are linearly fitted. Based on this, the quantitative equation between HUA and T₁ is derived, and corresponding diagram is constructed. The T₁ corresponding the minimum hydrogen consumption is identified to be 345℃.

Key words: VGO hydrotreating, Reactors, Temperature, Hydrogen consumption

Donghui Lü, Yingjia Wang, Lingjun Huang, Di Zhang, Guilian Liu, Wei Li, Peng Wang. Effect of vacuum gas oil hydrotreating reactor on multiple reactors and hydrogen network[J]. 中国化学工程学报, 2019, 27(10): 2498-2509.

Donghui Lü, Yingjia Wang, Lingjun Huang, Di Zhang, Guilian Liu, Wei Li, Peng Wang. Effect of vacuum gas oil hydrotreating reactor on multiple reactors and hydrogen network[J]. Chinese Journal of Chemical Engineering, 2019, 27(10): 2498-2509.

参考文献

[1] H. Sildirm, Y. Arkun, B. Cakal, D. Gokce, E. Kuzu, Plant-wide hierarchical optimization and control of an industrial hydrocracking process, J. Process Control 23(2013) 1229-1240.
[2] D. Iranshahi, R. Rafiei, M. Jafari, S. Amiri, M. Karimi, M.R. Rahimpour, Applying new kinetic and deactivation models in simulation of a novel thermally coupled reactor in continuous catalytic regenerative naphtha process, Chem. Eng. J. 229(2013) 153-176.
[3] E. Aydin, A.D. Celebi, H. Sildir, Y. Arkun, U. Canan, G. Is, M. Erdoganc, Dynamic modeling of an industrial diesel hydroprocessing plant by the method of continuous lumping, Comput. Chem. Eng. 82(2015) 44-54.
[4] E. Aydin, Y. Arkun, G. Is, M. Mutlu, M. Dikbas, Plant-wide optimization and control of an industrial diesel hydro-processing plant, Comput. Chem. Eng. 87(2016) 234-245.
[5] B.K. Srinivas, K.K. Pant, S.K. Gupta, D.N. Saraf, I.R. Choudhury, M. Sau, A molecular lump based model for simulation of industrial naphtha hydrotreators, Fuel Process. Technol. 166(2017) 146-163.
[6] A.T. Jarullah, N.A. Awad, I.M. Mujtaba, Optimal design and operation of an industrial fluidized catalytic cracking reactor, Fuel 206(2017) 657-674.
[7] D. Iranshahi, R. Saeedi, K. Azizi, M. Nategh, A novel integrated thermally coupled moving bed reactors for naphtha reforming process with hydrodealkylation of toluene, Appl. Therm. Eng. 112(2017) 1040-1056.
[8] J.J. Alves, G.P. Towler, Analysis of refinery hydrogen distribution systems, Ind. Eng. Chem. Res. 41(23) (2002) 5759-5769.
[9] M.M. Elhalwagi, F.A. Gabriel, D. Harell, Rigorous graphical targeting for resource conservation via material recycle/reuse networks, Ind. Eng. Chem. Res. 42(19) (2003) 4319-4328.
[10] D.C.Y. Foo, Z.A. Manan, Setting the minimum utility gas flowrate targets using cascade analysis technique, Ind. Eng. Chem. Res. 45(17) (2006) 5986-5995.
[11] D.C.Y. Foo, V. Kazantzi, M.M. El-Halwagi, Z.A. Manan, Surplus diagram and cascade analysis technique for targeting property-based material reuse network, Chem. Eng. Sci. 61(8) (2006) 2626-2642.
[12] D.K.S. Ng, D.C.Y. Foo, R.R. Tan, C.H. Pau, Y.L. Tan, Automated targeting for conventional and bilateral property-based resource conservation network, Chem. Eng. Sci. 149(1-3) (2009) 87-101.
[13] Q. Zhang, X. Feng, G.L. Liu, K.H. Chu, A novel graphical method for the integration of hydrogen distribution systems with purification reuse, Chem. Eng. Sci. 66(4) (2011) 797-809.
[14] Z.W. Liao, G. Rong, J.D. Wang, Y.R. Yang, Rigorous algorithmic targeting methods for hydrogen networks-Part I:Systems with no hydrogen purification, Chem. Eng. Sci. 66(5) (2011) 813-820.
[15] Z.W. Liao, G. Rong, J.D. Wang, Y.R. Yang, Rigorous algorithmic targeting methods for hydrogen networks-Part II:Systems with one hydrogen purification unit, Chem. Eng. Sci. 66(5) (2011) 821-833.
[16] Z.W. Liao, G.N. Tu, J.Y. Lou, B.B. Jiang, J.D. Wang, The influence of purifier models on hydrogen network optimization:Insights from a case study, Int. J. Hydrogen Energy 41(10) (2016) 5243-5249.
[17] D.K.S. Ng, D.C.Y. Foo, R.R. Tan, Automated targeting technique for single-impurity resource conservation networks. Part 1:Direct reuse/recycle, Ind. Eng. Chem. Res. 48(16) (2009) 7637-7646.
[18] D.K.S. Ng, D.C.Y. Foo, R.R. Tan, Automated targeting technique for single-impurity resource conservation networks. Part 2:Single-pass and partitioning wasteinterception systems, Ind. Eng. Chem. Res. 48(16) (2009) 7647-7661.
[19] C. Deng, Y.H. Zhou, C.L. Chen, X. Feng, Systematic approach for targeting interplant hydrogen networks, Energy 90(1) (2015) 68-88.
[20] G.L. Liu, H. Li, X. Feng, C. Deng, K.H. Chu, A conceptual method for targeting the maximum purification feed flow rate of hydrogen network, Chem. Eng. Sci. 88(12) (2013) 33-47.
[21] G.L. Liu, H. Li, X. Feng, C. Deng, Pinch location of the hydrogen network with purification reuse, Chin. J. Chem. Eng. 21(2013) 1332-1340.
[22] G.L. Liu, H. Li, X. Feng, C. Deng, Novel method for targeting the optimal purification feed flow rate of hydrogen network with purification reuse/recycle, AIChE J. 59(6) (2013) 1964-1980.
[23] G.L. Liu, M.Y. Zheng, L. Li, X.X. Jia, W.M. Dou, X. Feng, The effect of purification feed and product purities on the hydrogen network integration, Ind. Eng. Chem. Res. 53(2014) 6433-6449.
[24] Y.J. Wang, M.Y. Zheng, G.L. Liu, D. Zhang, Q. Zhang, Graphical method for simultaneous optimization of the hydrogen recovery and purification feed, Int. J. Hydrogen Energy 41(4) (2016) 2631-2648.
[25] W. Dai, R.J. Shen, D. Zhang, G.L. Liu, The integration based method for identifying the variation trend of fresh hydrogen consumption and optimal purification feed, Energy 119(2017) 732-743.
[26] J.B. Mao, R.J. Shen, Y.J. Wang, G.L. Liu, An integration method for the refinery hydrogen network with coupling sink and source, Int. J. Hydrogen Energy 40(29) (2015) 8989-9005.
[27] J.B. Mao, G.L. Liu, Y.J. Wang, D. Zhang, An integration-based graphical method for optimizing the residence time of hydrogen-consuming reactor, J. Clean. Prod. 135(2016) 119-126.
[28] L.J. Huang, W. Li, J.B. Mao, G.L. Liu, Analysis of the relation between coupled sink and purification based on the hydrogen network integration, Chem. Eng. Technol. 41(5) (2018) 1003-1012.
[29] L. L, Z.W. Wei, B.B. Liao, J.D. Jiang, Y.R. Yang Wang, Automatic design of multicontaminant refinery hydrogen networks using mixing potential concept, Ind. Eng. Chem. Res. 56(23) (2017) 6703-6710.
[30] J.Y. Lou, Z.W. Liao, B.B. Jiang, J.D. Wang, Y.R. yang, A thermodynamic irreversibility based design method for multi-contaminant hydrogen networks, Int. J. Hydrogen Energy 40(1) (2015) 435-443.
[31] B. Umana, A. Shoaib, N. Zhang, Integrating hydroprocessors in refinery hydrogen network optimisation, Appl. Energy 133(2014) 169-182.
[32] J.Y. Lou, Z.W. Liao, B.B. Jiang, J.D. Wang, Y.R. Yang, Robust optimization of hydrogen network, Int. J. Hydrogen Energy 39(3) (2014) 1210-1219.
[33] N. Jhaveri, B. Mohanty, S. Khanam, Mathematical modeling and optimization of hydrogen distribution network used in refinery, Int. J. Hydrogen Energy 39(1) (2014) 339-348.
[34] M.R.S. Birjandi, F. Shahraki, M.S. Birjandi, M.S. Nobandegani, Application of global optimization strategies to refinery hydrogen network, Int. J. Hydrogen Energy 39(27) (2014) 14503-14511.
[35] B. Umana, N. Zhang, R. Smith, Development of vacuum residue hydrodesulphurization-hydrocracking models and their integration with refinery hydrogen networks, Ind. Eng. Chem. Res. 55(8) (2016) 2391-2406.
[36] A. Mahmoud, A.S.M. Adam, J. Sunarso, S.M. Liu, Modeling and optimization of refinery hydrogen network-a new strategy to linearize power equation of new compressor, Asia Pac. J. Chem. Eng. 12(6) (2017) 948-959.
[37] X.Q. Liang, L.X. Kang, Y.Z. Liu, Impacts of subperiod partitioning on optimization of multiperiod hydrogen networks, Ind. Eng. Chem. Res. 56(38) (2017) 10733-10742.
[38] M.R.S. Birjandi, F. Shahraki, K. Razzaghi, A new optimization strategy to improve design of hydrogen network based formulation of hydrogen consumers, Chem. Biochem. Eng. Q. 32(1) (2018) 91-101.
[39] KBC, Petro-SIM suite 6.0, KBC Advanced Technologies plc, 2015.