[1] S.G. Luo, Optimized treatment of waste ion exchange resin, Nucl. Sci. Eng. 2(2003)165-172.(in Chinese) [2] J.B. Li, L.L. Li, H. Xie, Z.Q. Feng, Y. Zeng, Method for wet oxidation treatment of radioactive waste ion exchange resin, J. Isotopes 32(2019)45-52.(in Chinese) [3] J.L. Wang, Z. Wan, Treatment and disposal of spent radioactive ionexchange resins produced in the nuclear industry, Prog. Nucl. Energy 78(2015)47-55. [4] J.B. Mason, T.W. Oliver, M.P. Carson, G.M. Hill, Studsvik processing facility pyrolysis/steam reforming technology for volume and weight reduction and stabilization of LLRW and mixed wastes, in:Proceedings of the 2000 Waste Management Conference, 2000. Tucson, USA. [5] J.B. Mason, T.W. Oliver, G.M. Hill, P.F. Davin, M.R. Ping, Studsvik processing facility update, in:Proceedings of the 2003 Waste Management Conference, 2003. Tucson, USA. [6] C.M. Jantzen, T.H. Lorier, J.M. Pareizs, J.C. Marra, Fluidized Bed Steam Reformed (FBSR) Mineral Waste Forms:Characterization and Durability Testing, MRS Online Proceedings Library (OPL), 2006, p. 985, https://doi.org/10.1557/PROC-985-0985-NN10-04. [7] H. Tsai, Y.Y. Liu, J. Shuler, RFID technology for environmental remediation and radioactive waste management, October 3-7, in:Proceedings of ASME 201013th International Conference on Environmental Remediation and Radioactive Waste Management, 2010, pp. 511-518. Tsukuba, Japan, 2011. [8] J.J. Neeway, C.M. Jantzen, C.F. Brown, E.M. Pierce, J.H. Westsik Jr., Q. Nikolla P, Radionuclide and contaminant immobilization in the fluidized bed steam reforming waste product, Radioactive Waste (2012), https://doi.org/10.5772/36320. [9] X.H. Fang, R.X. Ma, B. Yang, L. Ren, W. Hua, Research on the treatment method of waste radioactive resin, Guangzhou Chem. Ind. 43(2015)6-7.(in Chinese) [10] Y. Zhang, J.S. Ruan, B.W. Zheng, L.L. Yang, W. Xu, H.R. Chu, Investigation and analysis of steam reforming reactor, Radiat. Prot. Commun. 39(2019)39-48.(in Chinese) [11] D.J. Gunn, Transfer of heat or mass to particles in fixed and fluidised beds, Int. J. Heat Mass Transf. 21(4)(1978)467-476. [12] P.N. Dwivedi, S.N. Upadhyay, Particle-fluid mass transfer in fixed and fluidized beds, Ind. Eng. Chem. Proc. Des. Dev. 16(2)(1977)157-165. [13] J.A. Kuipers, W. Prins, W.P.M. Van Swaaij, Numerical calculation of wall-to-bed heat-transfer coefficients in gas-fluidized beds, AIChE J. 38(7)(1992)1079-1091. [14] S. Rapagna, N. Jand, A. Kiennemann, P.U. Foscolo, Steam-gasi fication of biomass in a fluidised-bed of olivine particles, Biomass Bioenergy 19(3)(2000)187-197. [15] J. Han, H. Kim, The reduction and control technology of tar during biomass gasification/pyrolysis:An overview, Renew. Sustain. Energy Rev. 12(2)(2008)397-416. [16] S.M. Al-Salem, P. Lettieri, J. Baeyens, Recycling and recovery routes of plastic solid waste (PSW):A review, Waste Manag. 29(10)(2009)2625-2643. [17] M. Zevenhoven-Onderwater, M. Ohman, B.J. Skrifvars, R. Backman, A. Nordin,M. Hupa, Bed agglomeration characteristics of wood-derived fuels in FBC, Energy Fuels 20(2)(2006)818-824. [18] C.J. Yu, J.G. Qin, H. Nie, M.X. Fang, Z.Y. Luo, Experimental research on agglomeration in straw-fired fluidized beds, Appl. Energy 88(12)(2011)4534-4543. [19] W.G. Lin, K. Dam-Johansen, F. Frandsen, Agglomeration in bio-fuel fired fluidized bed combustors, Chem. Eng. J. 96(1-3)(2003)171-185. [20] J.S. Huang, F. Liu, Z.Y. Li, S.L. Liu, J. Zhu, Overview on preparation and purification of hydrogen fluoride, Inorg. Chem. Ind. 47(10)(2015)5-8.(in Chinese) [21] A. Van der Drift, A. Olsen, Conversion of Biomass, Prediction and Solution Methods for Ash Agglomeration and Related Problems, ECN Fuels Conversion and Environment Report, Netherlands, 1999. [22] F. Zintl, T. Ohman, Alkali-induced particle agglomeration and bed-defluidization on CFB-combustion of biomasstest of common and alternative bed materials, Proceedings of the 10th european Conference and Technology Exhibition on Biomass for Energy and industry, Wurzburg, Germany, 1998, pp. 8-11. [23] X.S. Wang, M.J. Rhodes, Using pulsed flow to overcome defluidization, Chem. Eng. Sci. 60(18)(2005)5177-5181. [24] G. Olofsson, Z.C. Ye, I. Bjerle, A. Andersson, Bed agglomeration problems in fluidized-bed biomass combustion, Ind. Eng. Chem. Res. 41(12)(2002)2888-2894. [25] C. Tangsathitkulchai, M. Tangsathitkulchai, Effect of bed materials and additives on the sintering of coal ashes relevant to agglomeration in fluidized bed combustion, Fuel Process. Technol. 72(3)(2001)163-183. [26] H.B. Vuthaluru, Remediation of ash problems in pulverised coal-fired boilers, Fuel 78(15)(1999)1789-1803. [27] H.B. Vuthaluru, T.M. Linjewile, D.K. Zhang, A.R. Manzoori, Investigations into the control of agglomeration and defluidisation during fluidised-bed combustion of low-rank coals, Fuel 78(4)(1999)419-425. [28] H.B. Vuthaluru, D.K. Zhang, Effect of Ca- and Mg-bearing minerals on particle agglomeration defluidisation during fluidised-bed combustion of a South Australian lignite, Fuel Process. Technol. 69(1)(2001)13-27. [29] D. Geldart, Types of gas fluidization, Powder Technol. 7(5)(1973)285-292. [30] J.B. Mason, Mineralization of Alkali Metals, Sulfur, and Halogens, 2009. USA, US7531152. [31] J.B. Mason, Pyrolysis of Decomposition of Organic Wastes, 2000. USA, https://uspto.report/patent/grant/6,084,147. [32] Y. Jin, Principles of Fluidization Engineering, Tsinghua University Press, Beijing, 2001.(in Chinese) [33] C.Y. Wen, Y.H. Yu, A generalized method for predicting the minimum fluidization velocity, AIChE J. 12(3)(1966)610-612. [34] P.S.B. Stewart, J.F. Davidson, Slug flow in fluidised beds, Powder Technol. 1(2)(1967)61-80. [35] F.J. Yang, J.J. Wang, X.P. Gu, L.F. Feng, Experiment and numerical simulation on slug fluidization of Geldart D particles, Chin. J. Process Eng. 5(6)(2005)597-600.(in Chinese) [36] V. Mettanant, P. Basu, J. Butler, Agglomeration of biomass fired fluidized bed gasifier and combustor, Can. J. Chem. Eng. 87(5)(2009)656-684. [37] B.M. Steenari, O. Lindqvist, V. Langer, Ash sintering and deposit formation in PFBC, Fuel 77(5)(1998)407-417. [38] E.J. Anthony, R.E. Talbot, L. Jia, D.L. Granatstein, Agglomeration and fouling in three industrial petroleum coke-fired CFBC boilers due to carbonation and sulfation, Energy Fuels 14(5)(2000)1021-1027. [39] A. Alizadeh, T.F.L. McKenna, Condensed mode cooling for ethylene polymerization:The influence of the heat of sorption, Macromol. React. Eng. 8(5)(2014)419-433. [40] H. Machenaud, The future of nuclear energy relies on integrated reactor development processes, Engineering 2(1)(2016)55-58. [41] Y. Zhou, J. Zhu, Group C+particles:Enhanced flow and fluidization of fine powders with nano-modulation, Chem. Eng. Sci. 207(2019)653-662. [42] M. Bartels, B. Vermeer, P.J.T. Verheijen, J. Nijenhuis, F. Kapteijn, J.R. van Ommen, Methodology for the screening of signal analysis methods for selective detection of hydrodynamic changes in fluidized bed systems, Ind. Eng. Chem. Res. 48(6)(2009)3158-3166. |