Effects of different nozzle materials on atomization results via CFD simulation

doi:10.1016/j.cjche.2019.09.008

中国化学工程学报 ›› 2020, Vol. 28 ›› Issue (2): 362-368.DOI: 10.1016/j.cjche.2019.09.008

• Fluid Dynamics and Transport Phenomena • 上一篇下一篇

Effects of different nozzle materials on atomization results via CFD simulation

Xiangyu Li¹, Jianjun Du^1,2, Licheng Wang³, Jiangli Fan^1,2, Xiaojun Peng^1,2

1 State Key Laboratory of Fine Chemicals, Dalian University of Technology, 2 Linggong Road, Dalian 116024, China;
2 Research Institute of Dalian University of Technology in Shenzhen, Gaoxin South fourth Road, Nanshan District, Shenzhen 518057, China;
3 Dalian FISTA Specialized Chemistry Co. Ltd., 131 Guangxian Road, Dalian 116023, China

收稿日期:2019-04-09 修回日期:2019-07-28 出版日期:2020-02-28 发布日期:2020-05-21
通讯作者: Jianjun Du
基金资助:
This work was financially supported by National Natural Science Foundation of China (21878039, 21822804, and 21676047), Dalian Science and Technology Major Project (2018ZD14GX002), NSFCLiaoning United Fund (U1608222).

Effects of different nozzle materials on atomization results via CFD simulation

Xiangyu Li¹, Jianjun Du^1,2, Licheng Wang³, Jiangli Fan^1,2, Xiaojun Peng^1,2

1 State Key Laboratory of Fine Chemicals, Dalian University of Technology, 2 Linggong Road, Dalian 116024, China;
2 Research Institute of Dalian University of Technology in Shenzhen, Gaoxin South fourth Road, Nanshan District, Shenzhen 518057, China;
3 Dalian FISTA Specialized Chemistry Co. Ltd., 131 Guangxian Road, Dalian 116023, China

Received:2019-04-09 Revised:2019-07-28 Online:2020-02-28 Published:2020-05-21
Contact: Jianjun Du
Supported by:
This work was financially supported by National Natural Science Foundation of China (21878039, 21822804, and 21676047), Dalian Science and Technology Major Project (2018ZD14GX002), NSFCLiaoning United Fund (U1608222).

摘要/Abstract

摘要： Spray drying, as a crucial operation in industrial production, converts solution to fine particle. The spray moiety directly affects the final particle morphology, size and distribution. Compared with the experimental method, computational fluid dynamics (CFD) modeling is a powerful and convenient tool for simulating the spray process. Based on the verified CFD model, different materials of atomizer were simulated to investigate the effect on droplet size and distribution in this work. The modeling result proved that the droplet size and distribution were influenced by the resistance coefficient of materials, wherein the Reynolds number could change the effect of roughness along with the change of mass flow rate on spray process. The results in this work have implication for controlling droplet size through developing new spray nozzle with different materials or surface coating.

关键词: CFD modeling, Spray process, Atomizer materials, Droplet size, Size distribution

Abstract: Spray drying, as a crucial operation in industrial production, converts solution to fine particle. The spray moiety directly affects the final particle morphology, size and distribution. Compared with the experimental method, computational fluid dynamics (CFD) modeling is a powerful and convenient tool for simulating the spray process. Based on the verified CFD model, different materials of atomizer were simulated to investigate the effect on droplet size and distribution in this work. The modeling result proved that the droplet size and distribution were influenced by the resistance coefficient of materials, wherein the Reynolds number could change the effect of roughness along with the change of mass flow rate on spray process. The results in this work have implication for controlling droplet size through developing new spray nozzle with different materials or surface coating.

Key words: CFD modeling, Spray process, Atomizer materials, Droplet size, Size distribution

Xiangyu Li, Jianjun Du, Licheng Wang, Jiangli Fan, Xiaojun Peng. Effects of different nozzle materials on atomization results via CFD simulation[J]. 中国化学工程学报, 2020, 28(2): 362-368.

Xiangyu Li, Jianjun Du, Licheng Wang, Jiangli Fan, Xiaojun Peng. Effects of different nozzle materials on atomization results via CFD simulation[J]. Chinese Journal of Chemical Engineering, 2020, 28(2): 362-368.

参考文献

[1] R. Zhao, J.G. Godwin, K. Jothimurugesan, et al., Spray-dried iron Fischer-Tropsch catalysts.1. Effect of structure on the attrition resistance of the catalysts in the calcined state, Ind. Eng. Chem. Res. 40(4) (2001) 1065-1075.
[2] K. Adibkia, M. Barzegar-Jalali, H. Maheri-Esfanjani, S. Ghanbarzadeh, J. Shokri, A. Sabzevari, Y. Javadzadeh, Physicochemical characterization of naproxen solid dispersions prepared via spray drying technology, Powder Technol. 246(2013) 448-455.
[3] J.J. O'Sullivan, E. Norwood, J.A. O'Mahony, A.L. Kelly, Atomisation technologies used in spray drying in the dairy industry:A review, J. Food Eng. 243(2019) 57-69.
[4] K. Masters, C.J.K. Dean, Spray Drying Handbook, Halstead Press, New York, 1985.
[5] S. Mandato, E. Rondet, G. Delapace, et al., Liquids' atomization with two different nozzles:Modeling of the effects of some processing and formulation conditions by dimensional analysis, Powder Technol. 224(2012) 323-330.
[6] O. Aydin, R. Unal, Experimental and numerical modeling of the gas atomization nozzle for gas flow behavior, Comput. Fluids 42(1) (2011) 37-43.
[7] S. Afshar, L. Metzger, H. Patel, C. Selomulya, M.W. Woo, A practical CFD modeling approach to estimate outlet boundary conditions of industrial multistage spray dryers:Inert particle flow field investigation, Dry. Technol. (2018) 1-15.
[8] E. Von Berg, W. Edelbauer, A. Alajbegovic, Coupled simulations of nozzle flow, primary fuel jet breakup, and spray formation, J. Eng. Gas Turbines Power 127(4) (2015) 897.
[9] A.A. Rizkalla, A.H. Lefebvre, The influence of air and liquid properties on airblast atomization, J. Fluids Eng. 97(3) (1974) 316.
[10] C.E. Ejim, M.A. Rahman, A. Amirfazli, B.A. Fleck, Effects of liquid viscosity and surface tension on atomization in two-phase, gas/liquid fluid coker nozzles, Fuel 89(8) (2010) 1872-1882.
[11] D.P. Hede, P. Bach, A.D. Jense, Two-fluid spray atomisation and pneumatic nozzles for fluid bed coating/agglomeration purposes:A review, Chem. Eng. Sci. 63(14) (2008) 3821-3842.
[12] E. Babinsky, P.E. Sojka, Modeling drop size distributions, Prog. Energy Combust. Sci. 28(4) (2002) 303-329.
[13] R. Ma, B. Dong, Z. Yu, T. Zhang, Y. Wang, W. Li, An experimental study on the spray characteristics of the air-blast atomizer, Appl. Therm. Eng. 88(SI) (2015) 149-156.
[14] T. Zhang, B. Dong, X. Chen, Z. Qiu, R. Jiang, W. Li, Spray characteristics of pressureswirl nozzles at different nozzle diameters, Appl. Therm. Eng. 121(2017) 984-991.
[15] M.M. Elkotb, M.A. Mahdy, M.E. Montaser, Investigation of external-mixing airblast atomizers, Proc, 2nd Int. Conf. Liq. Atomization Sprays. (1982) 69-74.
[16] ANSYS, Inc., ANSYS FLUENT, Help System. ANSYS FLUENT Users Guide, Release 17, ANSYS, Inc., U.S.A. 2016, p. 1.
[17] G.K. Batchelor, An introduction to fluid dynamic, Phys. Today 12(4) (1985) 36-38.
[18] W.E. Ranz, Rate-processes at a spherical boundary-a citation-classic commentary on evaporation from drops, Current Contents/Engineering Technology & Applied Sciences, This Week's Citation Classic 22(1993) 8.
[19] X. Yang, J. Xiao, M. Woo, X.D. Chen, Three-dimensional numerical investigation of a mono-disperse droplet spray dryer:validation aspects and multi-physics exploration, Dry. Technol. 33(6) (2015) 742-756.
[20] F.-J. Trujillo, S.-J. Lovatt, M.-B. Harris, et al., CFD modelling of the heat and mass transfer process during the evaporation of water from a circular cylinder, 3rd International Conference on CFD in the Minerals and Process Industries, CSIRO, Australia, 2003.
[21] J. Yan, X.D. Chen, A three-dimensional numerical study of the gas/particle interactions in an industrial-scale spray dryer for milk powder production, Dry. Technol. 27(10) (2009) 1018-1027.
[22] C.T. Crowe, T.R.T. And, J.N. Chung, Numerical models for two-phase turbulent flows, Annu. Rev. Fluid Mech. 28(1) (1996) 11-43.
[23] G.I. Taylor, Generation of ripples by wind blowing over viscous fluids, Cambridge University Press. 3(1963) 244-254.
[24] R.D. Reitz, F.V. Bracco, Mechanism of atomization of a liquid jet, Phys. Fluids 25(10) (1998) 1730-1742.
[25] A.H. Lefebvre, Air-blast atomization, Prog. Energy Combust. Sci. 6(3) (1980) 233-261.
[26] B. Hernandez, B. Fraser, L. Martin De Juan, M. Martin, Computational fluid dynamics (CFD) modeling of swirling flows in industrial counter-current spray-drying towers under fouling conditions, Ind. Eng. Chem. Res. 57(35) (2018) 11988-12002.

Effects of different nozzle materials on atomization results via CFD simulation

Effects of different nozzle materials on atomization results via CFD simulation

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Jihui Li, Bingjian Zhang, Yidan Shu. Simulation of gas-solid adsorption process considering particle-size distribution[J]. 中国化学工程学报, 2023, 54(2): 331-342.
[2]	Shidong Xue, Jingkun Han, Xi Xi, Junyi Zhao, Zhong Lan, Rongfu Wen, Xuehu Ma. Rapid velocity reduction and drift potential assessment of off-nozzle pesticide droplets[J]. 中国化学工程学报, 2022, 46(6): 243-254.
[3]	Teng Wang, Zihong Xia, Caixia Chen. Computational study of bubble coalescence/break-up behaviors and bubble size distribution in a 3-D pressurized bubbling gas-solid fluidized bed of Geldart A particles[J]. 中国化学工程学报, 2022, 44(4): 485-496.
[4]	Mohsen Rezaeimanesh, Ali Asghar Ghoreyshi, S.M. Peyghambarzadeh, Seyed Hassan Hashemabadi. A coupled CFD simulation approach for investigating the pyrolysis process in industrial naphtha thermal cracking furnaces[J]. 中国化学工程学报, 2022, 44(4): 528-542.
[5]	Lingzhen Kong, Jiaqing Chen, Tian Lan, Huan Sun, Kuisheng Wang. Spray and mixing characteristics of liquid jet in a tubular gas-liquid atomization mixer[J]. 中国化学工程学报, 2021, 34(6): 1-11.
[6]	Xianchao Liang, Limin He, Xiaoming Luo, Qingping Li, Yuanpeng You, Yiqiu Xu. Experimental study on sand particles accumulation, migration and separation efficiency in slug catcher[J]. 中国化学工程学报, 2021, 32(4): 134-143.
[7]	Shuaifeng Zhang, Qinghua Zhang, Jianzhuang Shang, Zaisha Mao, Chao Yang. Measurement methods of particle size distribution in emulsion polymerization[J]. 中国化学工程学报, 2021, 39(11): 1-15.
[8]	Ziqing Yuan, Ziyu Chen, Jianxin Mao, Renxian Zhou. The size effect and high activity of nanosized platinum supported catalysts for low temperature oxidation of volatile organic compounds[J]. 中国化学工程学报, 2021, 39(11): 135-143.
[9]	Yu Xie, Guoming Huang, Weiguo Hu, Yujun Wang. Effects of piperacillin synthesis on the interfacial tensions and droplet sizes[J]. 中国化学工程学报, 2021, 38(10): 53-62.
[10]	Seyed Mohammad Ali Najafi, Pouria Mikaniki, Hojat Ghassemi. Microscopic and macroscopic atomization characteristics of a pressure-swirl atomizer, injecting a viscous fuel oil[J]. 中国化学工程学报, 2020, 28(1): 9-22.
[11]	Qiao Tang, Jiyizhe Zhang, Yuxin Wu, Yundong Wang, Zuohua Liu. An experimental study of immiscible liquid-liquid dispersions in a pump-mixer of mixer-settler[J]. 中国化学工程学报, 2020, 28(1): 33-45.
[12]	Ao Nie, Ziqi Cai, Zhengming Gao, Zhimiao Wang, Archie Eaglesham. Droplet characteristics in the multi-staged high speed disperser with single inlet[J]. 中国化学工程学报, 2019, 27(8): 1756-1764.
[13]	Pouria Mikaniki, Seyed Mohammad Ali Najafi, Hojat Ghassemi. Experimental study of a heavy fuel oil atomization by pressure-swirl injector in the application of entrained flow gasifier[J]. 中国化学工程学报, 2019, 27(4): 765-771.
[14]	Yubin Wang, Jun Li, Yang Jin, Ming Chen, Yan Cao, Jianhong Luo. Visual study on the characteristics of liquid and droplet in a novel rotor-stator reactor[J]. 中国化学工程学报, 2019, 27(11): 2643-2652.
[15]	Ning Mao, Can Kang, Wisdom Opare, Yang Zhu. Hydrodynamics features of dispersed bubbles in the ventilated wake flow of a cylinder[J]. Chinese Journal of Chemical Engineering, 2018, 26(9): 1803-1813.