Highly dispersed metal incorporated hexagonal mesoporous silicates for catalytic cyclohexanone oxidation to adipic acid

doi:10.1016/j.cjche.2020.04.013

中国化学工程学报 ›› 2020, Vol. 28 ›› Issue (10): 2542-2548.DOI: 10.1016/j.cjche.2020.04.013

• Catalysis, Kinetics and Reaction Engineering • 上一篇下一篇

Highly dispersed metal incorporated hexagonal mesoporous silicates for catalytic cyclohexanone oxidation to adipic acid

Wenjuan Yan¹, Wenxiang Zhang¹, Qi Xia¹, Shuaishuai Wang¹, Shuxia Zhang¹, Jian Shen², Xin Jin¹

1 State Key Laboratory of Heavy Oil Processing, Center for Chemical Engineering Experimental Teaching, China University of Petroleum, Qingdao 266580, China;
2 College of Environment and Resources, Xiangtan University, Xiangtan 411105, China

收稿日期:2019-12-10 修回日期:2020-04-11 出版日期:2020-10-28 发布日期:2020-12-03
通讯作者: Xin Jin
基金资助:
This work was supported by the National Natural Science Foundation (21706290), Natural Science Foundation of Shandong Province (ZR2017MB004, ZR2017BB007), Postdoctoral Research Funding of Shandong Province (201703016), Fundamental Research Funding of Qingdao (17-1-1-67-jch, 17-1-1-80-jch), Qingdao Postdoctoral Research Funding (BY20170210), “the Fundamental Research Funds for the Central Universities” (18CX02145A, 17CX02017A), new faculty start-up funding from China University of Petroleum (YJ201601058) and China Postdoctoral Science Foundation (2017M612374).

Highly dispersed metal incorporated hexagonal mesoporous silicates for catalytic cyclohexanone oxidation to adipic acid

Wenjuan Yan¹, Wenxiang Zhang¹, Qi Xia¹, Shuaishuai Wang¹, Shuxia Zhang¹, Jian Shen², Xin Jin¹

1 State Key Laboratory of Heavy Oil Processing, Center for Chemical Engineering Experimental Teaching, China University of Petroleum, Qingdao 266580, China;
2 College of Environment and Resources, Xiangtan University, Xiangtan 411105, China

Received:2019-12-10 Revised:2020-04-11 Online:2020-10-28 Published:2020-12-03
Contact: Xin Jin
Supported by:
This work was supported by the National Natural Science Foundation (21706290), Natural Science Foundation of Shandong Province (ZR2017MB004, ZR2017BB007), Postdoctoral Research Funding of Shandong Province (201703016), Fundamental Research Funding of Qingdao (17-1-1-67-jch, 17-1-1-80-jch), Qingdao Postdoctoral Research Funding (BY20170210), “the Fundamental Research Funds for the Central Universities” (18CX02145A, 17CX02017A), new faculty start-up funding from China University of Petroleum (YJ201601058) and China Postdoctoral Science Foundation (2017M612374).

摘要/Abstract

摘要： Adipic acid is a dicarboxylic acid of great industrial importance, mainly used in the production of nylon-6,6 and polyurethane. The use of nitric acid as an oxidant in the industrial production of adipic acid poses significant carbon footprint to the environment. Clean adipic acid synthesis methods using a heterogeneous catalyst with H₂O₂ as oxidant and water as solvent have potential advantages of low catalyst cost, easy synthesis and recovery, cleanness and environmental protection. In this work, hexagonal mesoporous silicate materials were synthesized by a sol-gel method and evaluated for cyclohexanol/cyclohexanone oxidation to adipic acid. The physical and chemical properties of Fe-HMS were characterized by XRD, HR-TEM, BET and UV-Vis. The experimental results showed that Fe-HMS materials show pore sizes ranging from 2-3 nm. W- and Mo-based polyoxometalates were also evaluated and compared to the Fe-based HMS catalysts. To improve the adipic acid yield, the influence of the transition metal as well as the effect of metal loading, reaction temperature and catalyst amount on the catalytic performances of Fe-HMS have been investigated in details. When Si/Fe atomic ratio = 100, Fe-HMS catalyst shows the highest activity, with a cyclohexanone conversion of 92.3% and adipic acid selectivity of 29.4%. The reaction pathway of cyclohexanone oxidation was further proposed based on experimental data.

关键词: Oxidation, Adipic acid, Hexagonal mesoporous silicates, hydrogen peroxide

Abstract: Adipic acid is a dicarboxylic acid of great industrial importance, mainly used in the production of nylon-6,6 and polyurethane. The use of nitric acid as an oxidant in the industrial production of adipic acid poses significant carbon footprint to the environment. Clean adipic acid synthesis methods using a heterogeneous catalyst with H₂O₂ as oxidant and water as solvent have potential advantages of low catalyst cost, easy synthesis and recovery, cleanness and environmental protection. In this work, hexagonal mesoporous silicate materials were synthesized by a sol-gel method and evaluated for cyclohexanol/cyclohexanone oxidation to adipic acid. The physical and chemical properties of Fe-HMS were characterized by XRD, HR-TEM, BET and UV-Vis. The experimental results showed that Fe-HMS materials show pore sizes ranging from 2-3 nm. W- and Mo-based polyoxometalates were also evaluated and compared to the Fe-based HMS catalysts. To improve the adipic acid yield, the influence of the transition metal as well as the effect of metal loading, reaction temperature and catalyst amount on the catalytic performances of Fe-HMS have been investigated in details. When Si/Fe atomic ratio = 100, Fe-HMS catalyst shows the highest activity, with a cyclohexanone conversion of 92.3% and adipic acid selectivity of 29.4%. The reaction pathway of cyclohexanone oxidation was further proposed based on experimental data.

Key words: Oxidation, Adipic acid, Hexagonal mesoporous silicates, hydrogen peroxide

Wenjuan Yan, Wenxiang Zhang, Qi Xia, Shuaishuai Wang, Shuxia Zhang, Jian Shen, Xin Jin. Highly dispersed metal incorporated hexagonal mesoporous silicates for catalytic cyclohexanone oxidation to adipic acid[J]. 中国化学工程学报, 2020, 28(10): 2542-2548.

参考文献

[1] S.S. Acharyya, S. Ghosh, R. Bal, Nanoclusters of Cu(ii) supported on nanocrystalline W(Ⅵ) oxide:a potential catalyst for single-step conversion of cyclohexane to adipic acid, Green Chem. 17(2015) 3490-3499.
[2] P. Bhanja, S. Chatterjee, A.K. Patra, A. Bhaumik, A new microporous oxyfluorinated titanium(IV) phosphate as an efficient heterogeneous catalyst for the selective oxidation of cyclohexanone, J. Colloid Interface Sci. 511(2018) 92-100.
[3] Y. Matsumoto, M. Kuriyama, K. Yamamoto, K. Nishida, O. Onomura, Metal-free synthesis of adipic acid via organocatalytic direct oxidation of cyclohexane under ambient temperature and pressure, Org. Process. Res. Dev. 22(2018) 1312-1317.
[4] L. Mouheb, L. Dermeche, T. Mazari, S. Benadji, N. Essayem, C. Rabia, Clean adipic acid synthesis from liquid-phase oxidation of cyclohexanone and cyclohexanol using (NH₄)(x)A(y)PMo(12)O(40) (A:Sb, Sn, Bi) mixed heteropolysalts and hydrogen peroxide in free solvent, Catal. Lett. 148(2018) 612-620.
[5] A. Tahar, S. Benadji, T. Mazari, L. Dermeche, C. Marchal-Roch, C. Rabia, Preparation, characterization and reactivity of Keggin type phosphomolybdates, H3-2x Ni (x) PMo12O40 and (NH₄)(3-2x) Ni (x) PMo12O40, for adipic acid synthesis, Catal. Lett. 145(2015) 569-575.
[6] P. Bhanja, K. Ghosh, S.S. Islam, A.K. Patra, S.M. Islam, A. Bhaumik, New hybrid Iron phosphonate material as an efficient catalyst for the synthesis of adipic acid in air and water, ACS Sustain. Chem. Eng. 4(2016) 7147-7157.
[7] F. Cavani, L. Ferroni, A. Frattini, C. Lucarelli, A. Mazzini, K. Raabova, S. Alini, P. Accorinti, P. Babini, Evidence for the presence of alternative mechanisms in the oxidation of cyclohexanone to adipic acid with oxygen, catalysed by Keggin polyoxometalates, Appl. Catal. A 391(2011) 118-124.
[8] S.A. Chavan, D. Srinivas, P. Ratnasamy, Oxidation of cyclohexane, cyclohexanone, and cyclohexanol to adipic acid by a non-HNO₃ route over Co/Mn cluster complexes, J. Catal. 212(2002) 39-45.
[9] A.K. Patra, A. Dutta, A. Bhaumik, Mesoporous core-shell fenton nanocatalyst:A mild, operationally simple approach to the synthesis of adipic acid, Chem. Eur. J. 19(2013) 12388-12395.
[10] M. Vafaeezadeh, M. Mahmoodi Hashemi, Simple and green oxidation of cyclohexene to adipic acid with an efficient and durable silica-functionalized ammonium tungstate catalyst, Catal. Commun. 43(2014) 169-172.
[11] M. Shang, T. Noël, Q. Wang, Y. Su, K. Miyabayashi, V. Hessel, S. Hasebe, 2-and 3-stage temperature ramping for the direct synthesis of adipic acid in micro-flow packed-bed reactors, Chem. Eng. J. 260(2015) 454-462.
[12] J. Alcañiz-Monge, G. Trautwein, A. Garcia-Garcia, Influence of peroxometallic intermediaries present on polyoxometalates nanoparticles surface on the adipic acid synthesis, J. Mol. Catal. A Chem. 394(2014) 211-216.
[13] I.Q. Peñate, G. Lesage, P. Cognet, M. Poux, Clean synthesis of adipic acid from cyclohexene in microemulsions with stearyl dimethyl benzyl ammonium chloride as surfactant:From the laboratory to bench scale, Chem. Eng. J. 200-202(2012) 357-364.
[14] P. Blach, Z. Böstrom, S. Franceschi-Messant, A. Lattes, E. Perez, I. Rico-Lattes, Recyclable process for sustainable adipic acid production in microemulsions, Tetrahedron 66(2010) 7124-7128.
[15] L. Wang, Z. Chen, M. Huang, Z. Yang, P. Sun, K. Wang, W. Zhang, A green route to cyclohexanone:Selective oxidation of cyclohexanol promoted by non-precious catalyst of h-WO₃ nanorods, Catal. Lett. 146(2016) 1283-1290.
[16] M. Rezaei, A.N. Chermahini, H.A. Dabbagh, Green and selective oxidation of cyclohexane over vanadium pyrophosphate supported on mesoporous KIT-6, Chem. Eng. J. 314(2017) 515-525.
[17] N. Imanaka, T. Masui, K. Jyoko, Selective liquid phase oxidation of cyclohexane over Pt/CeO₂-ZrO₂-SnO₂/SiO₂ catalysts with molecular oxygen, J. Adv. Ceram 4(2015) 111-117.
[18] S.D. Nale, P.V. Rathod, V.H. Jadhav, Manganese incorporated on glucose as an efficient catalyst for the synthesis of adipic acid using molecular O-2 in aqueous medium, Appl. Catal., A 546(2017) 122-125.
[19] J. Feliciano Miranda, P.M. Cuesta Zapata, E.E. Gonzo, M.L. Parentis, L.E. Davies, N.A. Bonini, Amorphous Cr/SiO₂ materials hydrothermally treated:liquid phase cyclohexanol oxidation, Catal. Lett. 148(2018) 2082-2094.
[20] A. Alshammari, A. Koeckritz, V.N. Kalevaru, A. Bagabas, A. Martin, Potential of supported gold bimetallic catalysts for green synthesis of adipic acid from cyclohexane, Top. Catal. 58(2015) 1069-1076.
[21] Y. Liu, M.Q. Zhu, X.Z. Chen, U. Jameel, J.G. Lu, Coating of Au-Al₂O₃ catalyst in the wall of microcapillary and its application in cyclohexane oxidation, J. Flow Chem. 6(2016) 110-116.
[22] Oxidation of cyclohexanol to epsilon-caprolactone with aqueous hydrogen peroxide on H3PW12O40 and Cs2.5H0.5PW12O40, DOI:10.1016/j.catcom.2008.03.006
[23] M. Conte, X. Liu, D.M. Murphy, S.H. Taylor, K. Whiston, G.J. Hutchings, Insights into the reaction mechanism of cyclohexane oxidation catalysed by molybdenum blue nanorings, Catal. Lett. 146(2016) 126-135.
[24] S. Benadji, T. Mazari, L. Dermeche, N. Salhi, E. Cadot, C. Rabia, Clean alternative for adipic acid synthesis via liquid-phase oxidation of cyclohexanone and cyclohexanol over H3-2xCoxPMo12O40 catalysts with hydrogen peroxide, Catal. Lett. 143(2013) 749-755.
[25] D. Amitouche, M. Haouas, T. Mazari, S. Mouanni, R. Canioni, C. Rabia, E. Cadot, C. Marchal-Roch, The primary stages of polyoxomolybdate catalyzed cyclohexanone oxidation by hydrogen peroxide as investigated by in situ NMR. Substrate activation and evolution of the working catalyst, Appl. Catal., A 561(2018) 104-116.
[26] M. Moudjahed, L. Dermeche, S. Benadji, T. Mazari, C. Rabia, Dawson-type polyoxometalates as green catalysts for adipic acid synthesis, J. Mol. Catal. A Chem. 414(2016) 72-77.
[27] J. Luo, Y. Huang, B. Ding, P. Wang, X. Geng, J. Zhang, Y. Wei, Single-atom Mn active site in a triol-stabilized beta-Anderson manganohexamolybdate for enhanced catalytic activity towards adipic acid production, Catalysts 8(2018) 121-133.
[28] P. Wolf, C. Hammond, S. Conrad, I. Hermans, Post-synthetic preparation of Sn-, Tiand Zr-beta:a facile route to water tolerant, highly active Lewis acidic zeolites, Dalton Trans. 43(2014) 4514-4519.
[29] J. Jin, X. Ye, Y. Li, Y. Wang, L. Li, J. Gu, W. Zhao, J. Shi, Synthesis of mesoporous beta and Sn-beta zeolites and their catalytic performances, Dalton Trans. 43(2014) 8196-8204.
[30] A.B. Laursen, K.T. Højholt, L.F. Lundegaard, S.B. Simonsen, S. Helveg, F. Schüth, M. Paul, J.-D. Grunwaldt, S. Kegnæs, C.H. Christensen, K. Egeblad, Substrate size-selective catalysis with zeolite-encapsulated gold nanoparticles, Angew. Chem. 122(2010) 3582-3585.
[31] C. Hammond, N. Dimitratos, R.L. Jenkins, J.A. Lopez-Sanchez, S.A. Kondrat, M. Hasbi ab Rahim, M.M. Forde, A. Thetford, S.H. Taylor, H. Hagen, E.E. Stangland, J.H. Kang, J.M. Moulijn, D.J. Willock, G.J. Hutchings, Elucidation and evolution of the active component within Cu/Fe/ZSM-5 for catalytic methane oxidation:from synthesis to catalysis, ACS Catal. 3(2013) 689-699.
[32] N.M.F. Carvalho, A. Horn Jr., O.A.C. Antunes, Cyclohexane oxidation catalyzed by mononuclear iron(III) complexes, Appl. Catal. A 305(2006) 140-145.
[33] X. Yang, Y. Li, H. Yu, X. Gui, H. Wang, H. Huang, F. Peng, Enhanced catalytic activity of carbon nanotubes for the oxidation of cyclohexane by filling with Fe, Ni, and FeNi alloy nanowires, Aust. J. Chem. 69(2016) 689-695.
[34] Y. Xie, F. Zhang, P. Liu, F. Hao, H.A. Luo, Catalytic oxidation of cyclohexane with dioxygen over boehmite supported trans-A(2)B(2) type metalloporphyrins catalyst, J. Mol. Catal. A Chem. 386(2014) 95-100.
[35] B.B. Dong, K. Zhang, C.X. Li, C.Y. Yuan, X.C. Zheng, Synthesis and characterization of W-SBA-15 mesoporous material, Adv. Mater. Res. 485(2012) 31-34.
[36] X. Fang, X. Li, Z. Hao, J. He, D. Chen, Preparation of complex oxide WO₃-SnO₂ for catalytic synthesis of adipic acid, Chem. World 54(2013) 328-331.
[37] P.R. Makgwane, S.S. Ray, Efficient room temperature oxidation of cyclohexane over highly active hetero-mixed WO₃/V₂O₅ oxide catalyst, Catal. Commun. 54(2014) 118-123.
[38] Z. Hao, H. Yang, J. He, D. Chen, Preparation of WO₃/SiO₂ catalyst for green oxidation of cyclohexanone to adipic acid with H₂O₂, Applied Chemical Industry 42(2013) 245-247,252.
[39] X. Li, Y. Tian, J. Li, D. Chen, M. Li, Hydrothermal preparation of tungsten-based catalyst Sn-doped for catalytic synthesis of adipic acid, Applied Chemical Industry 43(2014) 1050-1053.
[40] F. Zhang, H. Yang, J. He, D. Chen, Preparation of lanthanum modified solid catalyst SnO₂-WO₃/La₂O₃ and its catalytic performance for synthesis of adipic acid, Chinese Rare Earths 34(2013) 46-49.
[41] H. Li, Y. She, H. Fu, M. Cao, J. Wang, T. Wang, Synergistic effect of co-reactant promotes one-step oxidation of cyclohexane into adipic acid catalyzed by manganese porphyrins, Can. J. Chem. 93(2015) 696-701.
[42] X. Gao, Y. Zhou, J. Gu, L. Li, Y. Li, Facile synthesis of hierarchical manganesecontaining TS-1 and its application on the oxidation of cyclohexanone with molecular oxygen, Microporous Mesoporous Mater. 275(2019) 263-269.
[43] Y. Deng, B. Chen, J. Wu, X. Yuan, H. Luo, Effect of calcination atmosphere on the catalytic performance of MnAPO-36 molecular sieve, Petrochem. Technol. 40(2011) 247-250.
[44] S. Chatterjee, P. Bhanja, L. Paul, M. Ali, A. Bhaumik, MnAPO-5 as an efficient heterogeneous catalyst for selective liquid phase partial oxidation reactions, Dalton Trans. 47(2018) 791-798.
[45] G. Zou, W. Zhong, L. Mao, Q. Xu, J. Xiao, D. Yin, Z. Xiao, S.R. Kirk, T. Shu, A non-nitric acid method of adipic acid synthesis:organic solvent-and promoter-free oxidation of cyclohexanone with oxygen over hollow-structured Mn/TS-1 catalysts, Green Chem. 17(2015) 1884-1892.
[46] Y. Han, S. Li, R. Ding, W. Xu, G. Zhang, Baeyer-Villiger oxidation of cyclohexanone catalyzed by cordierite honeycomb washcoated with Mg-Sn-W composite oxides, Chin. J. Chem. Eng. 27(2019) 564-574.
[47] L. Chen, Y. Zhou, Z. Gui, H. Cheng, Z. Qi, Au nanoparticles confined in hybrid shells of silica nanospheres for solvent-free aerobic cyclohexane oxidation, J. Mater. Sci. 52(2017) 7186-7198.
[48] R. Liu, H. Huang, H. Li, Y. Liu, J. Zhong, Y. Li, S. Zhang, Z. Kang, Metal nanoparticle/carbon quantum dot composite as a photocatalyst for high-efficiency cyclohexane oxidation, ACS Catal. 4(2014) 328-336.
[49] A. Alshammari, A. Koeckritz, V.N. Kalevaru, A. Bagabas, A. Martin, Significant formation of adipic acid by direct oxidation of cyclohexane using supported nano-gold catalysts, Chemcatchem 4(2012) 1330-1336.
[50] B.P.C. Hereijgers, B.M. Weckhuysen, Aerobic oxidation of cyclohexane by gold-based catalysts:New mechanistic insight by thorough product analysis, J. Catal. 270(2010) 16-25.
[51] A.M. Gill, C.S. Hinde, R.K. Leary, M.E. Potter, A. Jouve, P.P. Wells, P.A. Midgley, J.M. Thomas, R. Raja, Design of highly selective platinum nanoparticle catalysts for the aerobic oxidation of KA-oil using continuous-flow chemistry, Chemsuschem 9(2016) 423-427.
[52] X. Jiang, Y. Shan, L. Wu, M. Lu, M. Li, Highly efficient catalytic system for cyclohexanone synthesis by cyclohexane oxidation with oxygen, Acta Petrolei Sinica. Petroleum Processing Section 29(2013) 984-990.
[53] C.A.O. Xiaohua, Preparation,characterization of Csx H6-x P2 W18 O62 nH₂O and its activity on catalytic synthesis of adipic acid, J. Funct. Mater. 46(2015) 6124-6128.
[54] X. Cao, C. Xu, D. Zhou, Y. Lei, Preparation, characterization of Cs_xH_(6-x)P_2W_(18) O_(62)·nH_2O/diatomite and its catalytic application for adipic acid synthesis, Acta Petrolei Sinica. Petroleum Processing Section 31(2015) 1430-1437.
[55] T. Stoylkova, C. Chanev, Aerial oxidation of alcohols over CuAl-, CoAl-, NiAl-, ZnAllayered double hydroxides and their mixed oxides, React. Kinet. Mech. Catal. 117(2016) 47-58.
[56] Y. Qu, C. Fang, M. Duan, J. Wang, Investigations on the reaction kinetics and the catalytic effect of Cu(II) and V(V) in the oxidation of cyclohexanol by nitric acid, React. Kinet. Mech. Catal. 112(2014) 209-226.
[57] F. Yang, S. Zhou, S. Gao, X. Liu, S. Long, Y. Kong, In situ embedding of ultra-fine nickel oxide nanoparticles in HMS with enhanced catalytic activities of styrene epoxidation, Microporous Mesoporous Mater. 238(2017) 69-77.
[58] S. Rahman, C. Santra, R. Kumar, J. Bahadur, A. Sultana, R. Schweins, D. Sen, S. Maity, S. Mazumdar, B. Chowdhury, Highly active Ga promoted co-HMS-X catalyst towards styrene epoxidation reaction using molecular O-2, Appl. Catal. A 482(2014) 61-68.
[59] T.A. Zepeda, A. Infantes-Molina, J.N. Diaz de Leon, R. Obeso-Estrella, S. Fuentes, G. Alonso-Nunez, B. Pawelec, Synthesis and characterization of Ga-modified Ti-HMS oxide materials with varying Ga content, J. Mol. Catal. A Chem. 397(2015) 26-35.
[60] X. Li, L. Zhang, H. Gao, Q. Chen, Preparation, characterization, and catalytic performance of Ta-HMS mesoporous molecular sieve, Russ. J. Phys. Chem. A 90(2016) 1545-1551.
[61] Y.Y. Liu, K. Murata, M. Inaba, Synthesis and catalytic activity of niobium-containing hexagonal mesoporous silica, Chem. Lett. 32(2003) 992-993.
[62] P.T. Tanev, T.J. Pinnavaia, A neutral templating route to mesoporous molecular sieves, Science (New York, N.Y.) 267(1995) 865-867.
[63] X. Jin, M. Zhao, C. Zeng, W. Yan, Z. Song, P.S. Thapa, B. Subramaniam, R.V. Chaudhari, Oxidation of glycerol to dicarboxylic acids using cobalt catalysts, ACS Catal. 6(2016) 4576-4583.
[64] C. Xia, L. Ju, Y. Zhao, H. Xu, B. Zhu, F. Gao, M. Lin, Z. Dai, X. Zou, X. Shu, Heterogeneous oxidation of cyclohexanone catalyzed by TS-1:Combined experimental and DFT studies, Chin. J. Catal. 36(2015) 845-854.
[65] M.S. Kumar, J. Pérez-Ramírez, M.N. Debbagh, B. Smarsly, U. Bentrup, A. Brückner, Evidence of the vital role of the pore network on various catalytic conversions of N₂O over Fe-silicalite and Fe-SBA-15 with the same iron constitution, Appl. Catal. B 62(2006) 244-254.
[66] A. Boudjemaa, K. Bachari, M. Trari, Photo-induced hydrogen on iron hexagonal mesoporous silica (Fe-HMS) photo-catalyst, Int. J. Energy Res. 37(2013) 171-178.
[67] H. Perez, P. Navarro, J. Jose Delgado, M. Montes, Mn-SBA15 catalysts prepared by impregnation:Influence of the manganese precursor, Appl. Catal. A 400(2011) 238-248.
[68] J. Pisk, D. Agustin, R. Poli, Organic salts and merrifield resin supported PM12O40(3-) (M=Mo or W) as catalysts for adipic acid synthesis, Molecules 24(2019).
[69] Y. Deng, L. Ma, Y. Mao, Biological production of adipic acid from renewable substrates:Current and future methods, Biochem. Eng. J. 105(2016) 16-26.
[70] Keggin-Type Heteropoly Salts as Bifunctional Catalysts in Aerobic Baeyer-Villiger Oxidation, DOI:10.3390/ma11071208

Highly dispersed metal incorporated hexagonal mesoporous silicates for catalytic cyclohexanone oxidation to adipic acid

Highly dispersed metal incorporated hexagonal mesoporous silicates for catalytic cyclohexanone oxidation to adipic acid

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Xiaolin Guo, Zhaoyang Zhang, Pengfei Xing, Shuai Wang, Yibing Guo, Yanxin Zhuang. Kinetic mechanism of copper extraction from methylchlorosilane slurry residue using hydrogen peroxide as oxidant[J]. 中国化学工程学报, 2023, 60(8): 228-234.
[2]	Xun Tao, Fan Zhou, Xinlei Yu, Songling Guo, Yunfei Gao, Lu Ding, Guangsuo Yu, Zhenghua Dai, Fuchen Wang. Effect of carbon dioxide on oxy-fuel combustion of hydrogen sulfide: An experimental and kinetic modeling[J]. 中国化学工程学报, 2023, 59(7): 105-117.
[3]	Zijie Zhang, Qianyu Zha, Ying Liu, Zhibing Zhang, Jia Liu, Zheng Zhou. Study on the epoxidation of olefins with H₂O₂ catalyzed by biquaternary ammonium phosphotungstic acid[J]. 中国化学工程学报, 2023, 58(6): 146-154.
[4]	Chenyang Zhao, Yinhan Cheng, Guangfei Qu, Yongheng Yuan, Fenghui Wu, Ye Liu, Shan Liu, Junyan Li, Ping Ning. High-performance liquid-phase catalytic purification of phosphine in tail gas using Pd(II)/Cu(II) composite[J]. 中国化学工程学报, 2023, 57(5): 98-108.
[5]	Bingxiao Feng, Lining Hao, Chaoting Deng, Jiaqiang Wang, Hongbing Song, Meng Xiao, Tingting Huang, Quanhong Zhu, Hengjun Gai. A highly hydrothermal stable copper-based catalyst for catalytic wet air oxidation of m-cresol in coal chemical wastewater[J]. 中国化学工程学报, 2023, 57(5): 338-348.
[6]	Shengfeng Luo, Song Zhang, Yiping Zeng, Hui Zhang, Lili Zheng, Zhaopeng Xu. Study on oxygen transport and titanium oxidation in coating cracks under parallel gas flow based on LBM modelling[J]. 中国化学工程学报, 2023, 56(4): 15-24.
[7]	Yuxi Chai, Yanan Zhang, Yannan Tan, Zhiwei Li, Huangzhao Wei, Chenglin Sun, Haibo Jin, Zhao Mu, Lei Ma. Life cycle assessment of high concentration organic wastewater treatment by catalytic wet air oxidation[J]. 中国化学工程学报, 2023, 56(4): 80-88.
[8]	Peiyin Chen, Yanxiong Fang, Kaihong Xie, Yao Chen, Yang Liu, Hongliang Zuo, Weijian Lu, Baoyu Liu. Lacunary silicotungstic heteropoly salts as high-performance catalysts in oxidation of cyclopentene[J]. 中国化学工程学报, 2023, 56(4): 152-159.
[9]	Tinghao Jia, Yunbo Yu, Qing Liu, Yao Yang, Ji-Jun Zou, Xiangwen Zhang, Lun Pan. Theoretical and experimental study on the inhibition of jet fuel oxidation by diarylamine[J]. 中国化学工程学报, 2023, 56(4): 225-232.
[10]	Da Ke, Minjia Wang, Jiancheng Ruan, Xinzhi Chen, Shaodong Zhou. Efficient, continuous oxidation of durene to pyromellitic dianhydride mediated by a V-Ti-P ternary catalyst: The remarkable doping effect[J]. 中国化学工程学报, 2023, 55(3): 156-164.
[11]	Qiongna Xiao, Yuyan Jiang, Weiqiang Yuan, Jingjing Chen, Haohong Li, Huidong Zheng. Styrene epoxidation catalyzed by polyoxometalate/quaternary ammonium phase transfer catalysts: The effect of cation size and catalyst deactivation mechanism[J]. 中国化学工程学报, 2023, 55(3): 192-201.
[12]	Mengting Liu, Xuexue Dong, Zengjing Guo, Aihua Yuan, Shuying Gao, Fu Yang. Enabling tandem oxidation of benzene to benzenediol over integrated neighboring V-Cu oxides in mesoporous silica[J]. 中国化学工程学报, 2023, 55(3): 236-245.
[13]	Jitendra Diwakar, Selvamani Arumugam, Bhavna Saini, Anup Prakash Tathod, Nagabhatla Viswanadham. Mesoporous titanium-aluminosilicate as an efficient catalyst for selective oxidation of cyclohexene at mild reaction conditions[J]. 中国化学工程学报, 2023, 55(3): 257-265.
[14]	Suhang Jiang, Lijuan Tan, Yujia Tong, Lijian Shi, Weixing Li. A heterogeneous double chamber electro-Fenton with high production of H₂O₂ using La–CeO₂ modified graphite felt as cathode[J]. 中国化学工程学报, 2023, 54(2): 98-105.
[15]	Qian Zhu, Yan Zhuang, Hongqing Zhao, Peng Zhan, Cong Ren, Changsheng Su, Wenqiang Ren, Jiawen Zhang, Di Cai, Peiyong Qin. 2,5-Diformylfuran production by photocatalytic selective oxidation of 5-hydroxymethylfurfural in water using MoS₂/CdIn₂S₄ flower-like heterojunctions[J]. 中国化学工程学报, 2023, 54(2): 180-191.