Systematic Analysis of Carbon Dioxide Activation of Waste Tire by Factorial Design

摘要/Abstract

摘要： In this study,waste tire was used as raw material for the production of activated carbons through pyrolysis.Tire char was first produced by carbonization at 550℃ under nitrogen.A two factorial design was used to optimize the production of activated carbon from tire char.The effects of several factors controlling the activation process,such as temperature(850-950℃),time(2-6 h) and percentage of carbon dioxide(70%-100%) were investigated.The production was described mathematically as a function of these three factors.First order modeling equations were developed for surface area,yield and mesopore volume.It was concluded that the yield,BET surface area and mesopore volume of activated carbon were most sensitive to activation temperature and time while percentage of carbon dioxide in the activation gas was a less significant factor.

关键词: activated carbon, waste tire, factorial design, carbon dioxide

Abstract: In this study,waste tire was used as raw material for the production of activated carbons through pyrolysis.Tire char was first produced by carbonization at 550℃ under nitrogen.A two factorial design was used to optimize the production of activated carbon from tire char.The effects of several factors controlling the activation process,such as temperature(850-950℃),time(2-6 h) and percentage of carbon dioxide(70%-100%) were investigated.The production was described mathematically as a function of these three factors.First order modeling equations were developed for surface area,yield and mesopore volume.It was concluded that the yield,BET surface area and mesopore volume of activated carbon were most sensitive to activation temperature and time while percentage of carbon dioxide in the activation gas was a less significant factor.

Key words: activated carbon, waste tire, factorial design, carbon dioxide

P. P. M. Fung, W. H. Cheung, G. McKay. Systematic Analysis of Carbon Dioxide Activation of Waste Tire by Factorial Design[J]. , 2012, 20(3): 497-504.

参考文献

1 Mui, E.L.K., Ko, D.C.K., McKay, G., "Production of active carbons from waste tyres-A review", Carbon, 42, 2789-2805 (2004).
2 HKEPD, Monitoring of Solid Waste in Hong Kong 2007, ed. Department, H.K.E.P., Hong Kong (2008).
3 Vandevivere, P.C., Bianchi, R., Verstraete, W., "Treatment and reuse of wastewater from the textile wet-processing industry: Review of emerging technologies", J. Chem. Technol. Biotechnol., 72, 289-302 (1998).
4 Lin, S.H., Lin, C.M., "Treatment of textile waste effluents by ozonation and chemical coagulation", Water Res., 27, 1743-1748 (1993).
5 Ganesh, R., Boardman, G.D., Michelsen, D., "Fate of azo dyes in sludges", Water Res., 28, 1367-1376 (1994).
6 Walker, G.M., Weatherley, L.R., "Adsorption of acid dyes on to granular activated carbon in fixed beds", Water Res., 31, 2093-2101 (1997).
7 Chu, W., Tsui, S.M., "Photo-sensitization of diazo disperse dye in aqueous acetone", Chemosphere, 39, 1667-1677 (1999).
8 El-Geundi, M.S., "Color removal from textile effluents by adsorption techniques", Water Res., 25, 271-273 (1991).
9 Grau, P., "Textile-industry wastewaters treatment", Water Sci. Technol., 24, 97-103 (1991).
10 Lucarelli, L., Nadtochenko, V., Kiwi, J., "Environmental photochemistry: Quantitative adsorption and FTIR studies during the TiO₂-photocatalyzed degradation of Orange Ⅱ", Langmuir, 16, 1102-1108 (2000).
11 Allen, S., Brown, P., McKay, G., Flynn, O., "An evaluation of single resistance transfer models in the sorption of metal-ions by peat", J. Chem. Technol. Biotechnol., 54, 271-276 (1992).
12 Cuerda-Correa, E.M., Macias-Garcia, A., Diez, M.A.D., Ortiz, A.L., "Textural and morphological study of activated carbon fibers prepared from kenaf", Micropor. Mesopor. Mat., 111, 523-529 (2008).
13 Girgis, B.S., Yunis, S.S., Soliman, A.M., "Characteristics of activated carbon from peanut hulls in relation to conditions of preparation", Mater. Lett., 57, 164-172 (2002).
14 Guo, Y.P., Rockstraw, D.A., "Physicochemical properties of carbons prepared from pecan shell by phosphoric acid activation", Bioresour. Technol., 98, 1513-1521 (2007).
15 Guo, Y.P., Rockstraw, D.A., "Activated carbons prepared from rice hull by one-step phosphoric acid activation", Micropor. Mesopor. Mat., 100, 12-19 (2007).
16 Hartono, S.B., Ismadji, S., Sudaryanto, Y., Irawaty, W., "Utilization of teak sawdust from the timber industry as a precursor of activated carbon for the removal of dyes from synthetic effluents", J. Ind. Eng. Chem., 11, 864-869 (2005).
17 Valix, M., Cheung, W.H., McKay, G., "Preparation of activated carbon using low temperature carbonisation and physical activation of high ash raw bagasse for acid dye adsorption", Chemosphere, 56, 493-501 (2004).
18 Kobya, M., "Adsorption, kinetic and equilibrium studies of Cr (Ⅵ) by hazelnut shell activated carbon", Adsorpt. Sci. Technol., 22, 51-64 (2004).
19 Kobya, M., Demirbas, E., Senturk, E., Ince, M., "Adsorption of heavy metal ions from aqueous solutions by activated carbon prepared from apricot stone", Bioresour. Technol., 96, 1518-1521 (2005).
20 Kula, I., Ugurlu, M., Karaoglu, H., Celik, A., "Adsorption of Cd(Ⅱ) ions from aqueous solutions using activated carbon prepared from olive stone by ZnCl 2 activation", Bioresour. Technol., 99, 492-501 (2008).
21 Malik, R., Ramteke, D.S., Wate, S.R., "Adsorption of malachite green on groundnut shell waste based powdered activated carbon", Waste Manage., 27, 1129-1138 (2007).
22 Ng, C., Losso, J.N., Marshall, W.E., Rao, R.M., "Physical and chemical properties of selected agricultural byproduct-based activated carbons and their ability to adsorb geosmin", Bioresour. Technol., 84, 177-185 (2002).
23 Senthilkumaar, S., Kalaamani, P., Porkodi, K., Varadarajan, P.R., Subburaam, C.V., "Adsorption of dissolved reactive red dye from aqueous phase onto activated carbon prepared from agricultural waste", Bioresour. Technol., 97, 1618-1625 (2006).
24 Tan, I.A.W., Hameed, B.H., Ahmad, A.L., "Equilibrium and kinetic studies on basic dye adsorption by oil palm fibre activated carbon", Chem. Eng. J., 127, 111-119 (2007).
25 Valix, M., Cheung, W.H., Zhang, K., "Role of heteroatoms in activated carbon for removal of hexavalent chromium from wastewaters", J. Hazard. Mater., 135, 395-405 (2006).
26 Lin, Y.R., Teng, H.S., "Mesoporous carbons from waste tire char and their application in wastewater discoloration", Micropor. Mesopor. Mat., 54, 167-174 (2002).
27 Rozada, F., Otero, M., Garcia, A.I., Moran, A., "Application in fixed-bed systems of adsorbents obtained from sewage sludge and discarded tyres", Dyes Pigment, 72, 47-56 (2007).
28 Manchon-Vizuete, E., Macias-Garcia, A., Gisbert, A.N., Fernandez-Gonzalez, C., Gomez-Serrano, V., "Adsorption of mercury by carbonaceous adsorbents prepared from rubber of tyre wastes", J. Hazard. Mater., 119, 231-238 (2005).
29 Hamadi, N.K., Swaminathan, S., Chen, X.D., "Adsorption of Paraquat dichloride from aqueous solution by activated carbon derived from used tires", J. Hazard. Mater., 112, 133-141 (2004).
30 Murillo, R., Navarro, M.V., Lopez, J.M., Garcia, T., Callen, M.S., Aylon, E., Mastral, A.M., "Activation of pyrolytic tire char with CO₂ : Kinetic study", J. Anal. Appl. Pyrolysis, 71, 945-957 (2004).
31 Manchon-Vizuete, E., Macias-Garcia, A., Gisbert, A.N., FernandezGonzalez, C., Gomez-Serrano, V., "Preparation of mesoporous and macroporous materials from rubber of tyre wastes", Micropor. Mesopor. Mat., 67, 35-41 (2004).
32 San Miguel, G., Fowler, G.D., Sollars, C.J., "A study of the characteristics of activated carbons produced by steam and carbon dioxide activation of waste tyre rubber", Carbon, 41, 1009-1016 (2003).
33 Bacaoui, A., Yaacoubi, A., Dahbi, A., Bennouna, C., Ayele, J., Mazet, M., "Activated carbon production from Moroccan olive wastes-Influence of some factors", Environ. Technol., 19, 1203-1212 (1998).
34 Gomez, V., Callao, M.P., "Modeling the adsorption of dyes onto activated carbon by using experimental designs", Talanta, 77, 84-89 (2008).
35 Hsu, J.C., Lin, C.J., Liao, C.H., Chen, S.T., "Evaluation of the multiple-ion competition in the adsorption of As(V) onto reclaimed iron-oxide coated sands by fractional factorial design", Chemosphere, 72, 1049-1055 (2008).
36 Ponnusami, V., Krithika, V., Madhuram, R., Srivastava, S.N., "Biosorption of reactive dye using acid-treated rice husk: Factorial design analysis", J. Hazard. Mater., 142, 397-403 (2007).
37 Sayan, E., "Ultrasound-assisted preparation of activated carbon from alkaline impregnated hazelnut shell: An optimization study on removal of Cu²⁺ from aqueous solution", Chem. Eng. J., 115, 213-218 (2006).
38 Seki, Y., Seyhan, S., Yurdakoc, M., "Removal of boron from aqueous solution by adsorption on Al₂O₃ based materials using full factorial design", J. Hazard. Mater., 138, 60-66 (2006).
39 Brunauer, S., Emmett, P.H., Teller, E., "Adsorption of gases in multimolecular layers", J. Am. Chem. Soc., 60, 309-319 (1938).

[1]	Chaojie Li, Xianxin Fang, Meiling Sun, Jihai Duan, Weiwen Wang. Study on two-phase cloud dispersion from liquefied CO₂ release[J]. 中国化学工程学报, 2023, 60(8): 37-45.
[2]	Yifan Jiang, Bingqi Xie, Jisong Zhang. Highly reactive and reusable heterogeneous activated carbons-based palladium catalysts for Suzuki-Miyaura reaction[J]. 中国化学工程学报, 2023, 60(8): 165-172.
[3]	Xun Tao, Fan Zhou, Xinlei Yu, Songling Guo, Yunfei Gao, Lu Ding, Guangsuo Yu, Zhenghua Dai, Fuchen Wang. Effect of carbon dioxide on oxy-fuel combustion of hydrogen sulfide: An experimental and kinetic modeling[J]. 中国化学工程学报, 2023, 59(7): 105-117.
[4]	Tatyana P. Adamova, Sergey S. Skiba, Andrey Yu. Manakov, Sergey Y. Misyura. Growth rate of CO₂ hydrate film on water–oil and water–gaseous CO₂ interface[J]. 中国化学工程学报, 2023, 56(4): 266-272.
[5]	Bowen Jiang, Jia Liu, Guoqiang Yang, Zhibing Zhang. Efficient conversion of CO₂ into cyclic carbonates under atmospheric by halogen and metal-free poly(ionic liquid)s[J]. 中国化学工程学报, 2023, 55(3): 202-211.
[6]	Mingdong Sun, Dongxin Pan, Tingting Ye, Jing Gu, Yu Zhou, Jun Wang. Ionic porous polyamide derived N-doped carbon towards highly selective electroreduction of CO₂[J]. 中国化学工程学报, 2023, 55(3): 212-221.
[7]	Mengge Shang, Jing Zhang, Jinqiang Sun, Shimo Yu, Feng Hua, Xiaoxu Xuan, Xun Sun, Serguei Filatov, Xibin Yi. Amine-functionalized mesoporous UiO-66 aerogel for CO₂ adsorption[J]. 中国化学工程学报, 2023, 54(2): 36-43.
[8]	Xianglin Liu, Minjie Xu, Chenxi Cao, Zixu Yang, Jing Xu. Effects of zinc on χ-Fe₅C₂ for carbon dioxide hydrogenation to olefins: Insights from experimental and density function theory calculations[J]. 中国化学工程学报, 2023, 54(2): 206-214.
[9]	Zhongyao Zhang, Ming Gao, Xiaopeng Chen, Xiaojie Wei, Jiezhen Liang, Chenghong Wu, Linlin Wang. The Joule–Thomson effect of (CO₂ + H₂) binary system relevant to gas switching reforming with carbon capture and storage (CCS)[J]. 中国化学工程学报, 2023, 54(2): 215-231.
[10]	Huan Xiang, Huiping Zhang, Pengfei Liu, Ying Yan. Adsorption dynamics of ethane from air in structured fixed beds with different microfibrous composites[J]. 中国化学工程学报, 2023, 53(1): 14-24.
[11]	Yadong Li, Yuanhui Shen, Zhaoyang Niu, Junpeng Tian, Donghui Zhang, Zhongli Tang, Wenbin Li. Process analysis of temperature swing adsorption and temperature vacuum swing adsorption in VOCs recovery from activated carbon[J]. 中国化学工程学报, 2023, 53(1): 346-360.
[12]	Xing Su, Ning Qiao, Bao-Chang Sun. A route for the study on mass transfer enhancement by adding particles in liquid phase[J]. 中国化学工程学报, 2022, 48(8): 158-165.
[13]	Vladimir S. Derevschikov, Janna V. Veselovskaya, Anton S. Shalygin, Dmitry A. Yatsenko, Andrey Z. Sheshkovas, Oleg N. Martyanov. Operating limits and features of direct air capture on K₂CO₃/ZrO₂ composite sorbent[J]. 中国化学工程学报, 2022, 46(6): 11-20.
[14]	Wenjian Zhu, Xuhua Shen, Rui Ou, Manoj Murugesan, Aihua Yuan, Jianfeng Liu, Xiaocai Hu, Zhen Yang, Ming Shen, Fu Yang. Superhigh selective capture of volatile organic compounds exploiting cigarette butts-derived engineering carbonaceous adsorbent[J]. 中国化学工程学报, 2022, 46(6): 194-206.
[15]	Jipeng Dong, Fei Wang, Guanghui Chen, Shougui Wang, Cailin Ji, Fei Gao. Fabrication of nickel oxide functionalized zeolite USY composite as a promising adsorbent for CO₂ capture[J]. 中国化学工程学报, 2022, 46(6): 207-213.