[1] L. Hua, Y.G. Zhao, J. Hu, T. Tang, S.J. Shuai, Comparison between air-assisted and airless urea spray for diesel SCR system by PDA and CFD, SAE Paper No. 2012-01-1081, SAE Technical Paper, 2012. [2] H.Y. Dong, S.J. Shuai, J.X. Wang, Effect of urea thermal decomposition on diesel NOxSCR aftertreatment system, SAE Paper No.2008-01-1544. SAE Technical Paper, 2008. [3] Y. Gao, T. Luan, T. Lv, K. Cheng, H. Xu, Performance of V2O5-WO3-MoO3/TiO2 catalyst for selective catalytic reduction of NOX by NH3, Chin. J. Chem. Eng. 21(1) (2013) 1-7. [4] F. Birkhold, U. Meingast, P. Wassermann, O. Deutschmann, Analysis of the injection of urea-water-solution for automotive SCR DeNOX-systems:Modeling of two-phase flow and spray/wall-interaction, SAE paper No.2006-01-0643. SAE Technical Paper, 2006. [5] V.O. Strots, S. Santhanam, B.J. Adelman, G.A. Griffin, E.M. Derybowski, Deposit formation in urea-SCR systems, SAE paper No.2009-01-2780. SAE Technical Paper, 2009. [6] L.F. Xu, W. Watkins, R. Snow, G. Graham, R. Mccabe, C. Lambert, R.O. Carter, Laboratory and engine study of urea-related deposits in diesel urea-SCR aftertreatment systems, SAE paper No. 2007-01-1582. SAE Technical Paper, 2007. [7] Zheng, G. Y., File, A., Kotrba, A., Floyd, R., Investigation of urea deposits in urea SCR systems for medium and heavy duty trucks. SAE paper No. 2010-01-1941. SAE Technical Paper (2010) [8] T.J. Wang, S.W. Baek, S.Y. Lee, D.H. Kang, G.K. Yeo, Experimental investigation on evaporation of urea-water-solution droplet for SCR applications, AIChE J. 55(12) (2009) 3267-3276. [9] S.N.A. Musa, M. Saito, T. Furuhata, M. Arai, Evaporation characteristics of a single aqueous urea solution droplet, ICLASS-2006, Kyoto, Paper ID ICLASS06-195, 2006. [10] Z. Huang, K. Yin, Z. Zhou, Z. Wang, W. Yang, J. Zhou, Experimental investigation on evaporation characteristics of urea-aqueous-solution droplet, Chem. Ind. Eng. Progr. 33(4) (2014) 817-823(In Chinese). [11] L. Zhong, Q. Song, Q.Z. Huang, Q. Yao, Evaporation and conversion characterizations of urea-water-solution droplets within the temperature window for SNCR DeNOx, Proc. CSEE 33(26) (2013) 21-26(In Chinese). [12] L. Stradella, M. Argentero, A study of the thermal decomposition of urea, of related compounds and thiourea using DSC and TG-EGA, Thermochim. Acta 219(27) (1993) 315-323. [13] J. Chen, K. Isa, Thermal decomposition of urea and urea derivatives by simultaneous TG/(DTA)/MS, J. Mass Spectrom. Soc. Jpn. 46(4) (1998) 299-303. [14] P.M. Schaber, J. Colson, S. Higgins, E. Dietz, D. Thielen, B. Anspach, J. Brauer, Study of the urea thermal decomposition (pyrolysis) reaction and importance to cyanuric acid production, Am. Lab. 31(16) (1999) 13-21. [15] P.M. Schaber, J. Colson, S. Higgins, D. Thielen, B. Anspach, J. Brauer, Thermal decomposition(pyrolysis) of urea in an open reaction vessel, Thermochim. Acta 424(1) (2004) 131-142. [16] A. Lundström, B. Andersson, L. Olsson, Urea thermolysis studied under flow reactor conditions using DSC and FT-IR, Chem. Eng. J. 150(2) (2009) 544-550. [17] M. Eichelbaum, R.J. Farrauto, M.J. Castaldi, The impact of urea on the performance of metal exchanged zeolites for the selective catalytic reduction of NOx:part I. Pyrolysis and hydrolysis of urea over zeolite catalysts, Appl. Catal. B Environ. 97(1) (2010) 90-97. [18] J.C. Wurzenberger, R. Wanker, Multi-scale SCR modeling, 1D kinetic analysis and 3D system simulation, SAE Paper No. 2005-01-0948. SAE Technical Paper, 2005. [19] X.N. Tian, Y.H. Xiao, P.L. Zhou, Optimization of the location of injector in ureaselective catalytic reduction system, J. Mar. Sci. Technol. 20(2) (2015) 238-248. [20] B. Abramzon, W.A. Sirignano, Droplet vaporization model for spray combustion calculations, Int. J. Heat Mass Transf. 32(9) (1989) 1605-1618. [21] S. Sazhin, Advanced models of fuel droplet heating and evaporation, Prog. Energy Combust. Sci. 32(2) (2006) 162-214. [22] A. Lundström, B. Waldheim, H. Ström, B. Westerberg, Modelling of urea gas phase thermolysis and theoretical details on urea evaporation, Proc. Inst. Mech. Eng. D J. Automob. Eng. 225(10) (2011) 1392-1398. [23] F. Birkhold, U. Meingast, P. Wassermann, O. Deutschmann, Modeling and simulation of the injection of urea-water-solution for automotive SCR DeNOx-system, Appl. Catal. B Environ. 70(1) (2007) 119-127. [24] H. Ström, A. Lundström, B. Andersson, Choice of urea-spray models in CFD simulations of urea-SCR systems, Chem. Eng. J. 150(1) (2009) 69-82. [25] E. Abu-Ramadan, K. Saha, X. Li, Modeling the depleting mechanism of urea-watersolution droplet for automotive selective catalytic reduction systems, AIChE J 57(11) (2011) 3210-3225. [26] R.S. Miller, K. Harstad, J. Bellan, Evaluation of equilibrium and non-equilibrium evaporation models for many-droplet gas-liquid flow simulation, Int. J. Multiphase Flow 24(6) (1998) 1025-1055. [27] V. Ebrahimian, A. Nicolle, C. Habchi, Detailed modeling of the evaporation and thermal decomposition of urea-water solution in SCR system, AIChE J. 58(7) (2012) 1998-2009. [28] S. Kontin, A. Höfler, R. Koch, H.J. Bauer, Heat and mass transfer accompanied by crystallisation of single particles containing urea-water-solution, 23rd Annual Conference on Liquid Atomization and Spray Systems, Brno, Czech Republic, 2010. [29] S.D. Yim, S.J. Kim, J.H. Baik, I. Nam, Y.S. Mok, J.H. Lee, B. Cho, S.H. Oh, Decomposition of urea into NH3 for the SCR process, Ind. Eng. Chem. Res. 43(16) (2004) 4856-4863. [30] V. Ebrahimian, Development of multi-component evaporation models and 3D modeling of NOx-SCR reduction systemPh. D. Thesis L'Universitè De Toulouse, 2011. [31] W. Brack, B. Heine, F. Birkhold, M. Kruse, G. Schoch, S. Tischer, O. Deutschmann, Kinetic modeling of urea decomposition based on systematic thermogravimetric analyses of urea and its most important by-products, Chem. Eng. Sci. 106(17) (2014) 1-8. [32] AVL List GmbH, Version 2013, graz, spray module, 2013. [33] J.B. Yang, M.Q. Yu, Y.C. Chen, X.Y. Chen, W.T. Chen, Development of the software for inquiring physical property data with VB6.0 and access database, Comput. Appl. Chem. 2(28) (2011) 249-252(In Chinese). [34] J. Xu, T. Chen, X. Chen, A study of water-drop evaporation constants, J. Eng. Therm. Energy Power 7(5) (1992) 268-271(In Chinese). [35] X.B. Gan, D.W. Yao, F. Wu, X.W. Li, L. Wei, Kinetic optimization of urea-SCR thermal decomposition based on PSO algorithm, Chin. Intern. Combust. Engine Eng. 37(3) (2016) 83-87(In Chinese) |