Droplets diameter distribution using maximum entropy formulation combined with a new energy-based sub-model

doi:10.1016/j.cjche.2016.03.004

Chinese Journal of Chemical Engineering ›› 2016, Vol. 24 ›› Issue (11): 1625-1630.DOI: 10.1016/j.cjche.2016.03.004

• 第25届中国过程控制会议专栏 • 上一篇下一篇

Droplets diameter distribution using maximum entropy formulation combined with a new energy-based sub-model

Seyed Mostafa Hosseinalipour¹, Hadiseh Karimaei¹, Ehsan Movahednejad²

1 Energy and Environmental Lab, Dpt. Mech. Eng., Iran University of Science and Technology, 16846-13114, Narmak, Tehran, Iran;
2 University of California, Berkeley, USA

收稿日期:2016-01-07 修回日期:2016-03-02 出版日期:2016-11-28 发布日期:2016-12-06
通讯作者: Hadiseh Karimaei

Droplets diameter distribution using maximum entropy formulation combined with a new energy-based sub-model

Seyed Mostafa Hosseinalipour¹, Hadiseh Karimaei¹, Ehsan Movahednejad²

1 Energy and Environmental Lab, Dpt. Mech. Eng., Iran University of Science and Technology, 16846-13114, Narmak, Tehran, Iran;
2 University of California, Berkeley, USA

Received:2016-01-07 Revised:2016-03-02 Online:2016-11-28 Published:2016-12-06
Contact: Hadiseh Karimaei

摘要/Abstract

摘要： The maximum entropy principle (MEP) is one of the firstmethods which have been used to predict droplet size and velocity distributions of liquid sprays. Thismethod needs amean droplets diameter as an input to predict the droplet size distribution. This paper presents a newsub-model based on the deterministic aspects of liquid atomization process independent of the experimental data to provide the mean droplets diameter for using in the maximum entropy formulation (MEF). For this purpose, a theoretical model based on the approach of energy conservation law entitled energy-based model (EBM) is presented. Based on this approach, atomization occurs due to the kinetic energy loss. Prediction of the combinedmodel (MEF/EBM) is in good agreement with the available experimental data. The energy-basedmodel can be used as a fast and reliable enoughmodel to obtain a good estimation of the mean droplets diameter of a spray and the combined model (MEF/EBM) can be used to well predict the droplet size distribution at the primary breakup.

关键词: Mean droplets diameter, Energy conservation, Maximum entropy formulation (MEF), Size distribution, Statistical thermodynamics, Mathematical modeling

Abstract: The maximum entropy principle (MEP) is one of the firstmethods which have been used to predict droplet size and velocity distributions of liquid sprays. Thismethod needs amean droplets diameter as an input to predict the droplet size distribution. This paper presents a newsub-model based on the deterministic aspects of liquid atomization process independent of the experimental data to provide the mean droplets diameter for using in the maximum entropy formulation (MEF). For this purpose, a theoretical model based on the approach of energy conservation law entitled energy-based model (EBM) is presented. Based on this approach, atomization occurs due to the kinetic energy loss. Prediction of the combinedmodel (MEF/EBM) is in good agreement with the available experimental data. The energy-basedmodel can be used as a fast and reliable enoughmodel to obtain a good estimation of the mean droplets diameter of a spray and the combined model (MEF/EBM) can be used to well predict the droplet size distribution at the primary breakup.

Key words: Mean droplets diameter, Energy conservation, Maximum entropy formulation (MEF), Size distribution, Statistical thermodynamics, Mathematical modeling

Seyed Mostafa Hosseinalipour, Hadiseh Karimaei, Ehsan Movahednejad. Droplets diameter distribution using maximum entropy formulation combined with a new energy-based sub-model[J]. Chinese Journal of Chemical Engineering, 2016, 24(11): 1625-1630.

参考文献

[1] U. Fritsching, Spray simulation, second ed. Cambridge University Press, London, UK, 2004128-130.
[2] A.H. Lefebvre, Atomization and sprays, fourth ed. Hemisphere Publishing,Washington, US, 1989210-310.
[3] E. Babinsky, P.E. Sojka,Modeling droplet size distributions, Prog. Energy Combust. Sci. 28(2002) 303-329.
[4] R.W. Sellens, T.A. Brzustowski, A prediction of drop-size distribution in a spray from first principles, Atomization Spray Technol. 1(1985) 89-102.
[5] X. Li, R.S. Tankin, Droplet size distribution:A deviation of a Nukiyama-Tanasawa type distribution function, Combust. Sci. Technol. 56(1987) 65-76.
[6] R.W. Sellens, Prediction of the drop size and velocity distribution in a spray based on the maximum entropy formalism, Part. Part. Syst. Charact. 6(1989) 17-27.
[7] X. Li, R.S. Tankin, Derivation of droplet size distribution in sprays by using information theory, Combust. Sci. Technol. 60(1987) 345-357.
[8] C. Dumouchel, The maximum entropy formalism and the prediction of liquid spray drop-size distribution, Entropy 11(2009) 713-747.
[9] N. Ashgriz, Handbook of atomization and sprays, Theory and applications, 3th ed. Springer, New York, US 2011, pp. 720-900.
[10] H. Liu, Science and engineering of droplets:Fundamentals and applications, materials science and process technology, second ed. William Andrew, Utah, US, 1999250-270.
[11] C. Eberhart, D. Lineberry, M. Moser, Experimental cold flow characterization of a swirl coaxial injector element, 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Denver, Colorado 2009, p. 5140.
[12] E. Movahednejad, Prediction of size and velocity distribution of droplets in spray by maximum entropy principle and using wave instability, University of Tarbiat Modares, 2010(Doctoral dissertation).
[13] K.Y. Huh, E. Lee, J.Y. Koo, Diesel spray atomization model considering nozzle exit turbulence conditions, Atomization Sprays 8(1998) 453-469.
[14] E. Movahednejad, F. Ommi, Development of maximum entropy method for prediction of droplet size distribution in primary breakup region of spray, World Acad. Sci. Eng. Technol. 59(2011) 1844-1850.
[15] E. Movahednejad, F. Ommi, S.M. Hosseinalipour, et al., Application of maximum entropy method for droplet size distribution prediction using instability analysis of liquid sheet, Heat Mass Transf. 47(2011) 1591-1600.
[16] E. Movahednejad, F. Ommi, S.M. Hosseinalipour, Prediction of droplet size and velocity distribution in droplet formation region of liquid spray, Entropy 12(2010) 1484-1498.
[17] C.E. Shannon, W. Weaver, The mathematical theory of communication, first ed. University of Illinois Press, Urbana, US, 1949190-250.
[18] X. Li, L.P. Chin, R.S. Tankin, et al., Comparison between experiments and predictions based onmaximum entropy for sprays from a pressure atomizer, Combust. Flame 86(1991) 73-89.
[19] F.M. White, Viscous fluid flow, second ed. McGrow-Hill, New York, US, 1991381-390.
[20] S.M. Hosseinalipour, R. Ghorbani, H. Karimaei, Effect of liquid sheet and gas streams characteristics on the instability of a hollow cone spray using an improved linear instability analysis, Asia Pac. J. Chem. Eng. 11(2016) 24-33.

Droplets diameter distribution using maximum entropy formulation combined with a new energy-based sub-model

Droplets diameter distribution using maximum entropy formulation combined with a new energy-based sub-model

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Jindong Dai, Chi Zhai, Jiali Ai, Guangren Yu, Haichao Lv, Wei Sun, Yongzhong Liu. A cellular automata framework for porous electrode reconstruction and reaction-diffusion simulation[J]. 中国化学工程学报, 2023, 60(8): 262-274.
[2]	Danlei Chen, Yiqing Luo, Xigang Yuan. Cascade refrigeration system synthesis based on hybrid simulated annealing and particle swarm optimization algorithm[J]. 中国化学工程学报, 2023, 58(6): 244-255.
[3]	Xia Xiong, Zuohua Liu, Changyuan Tao, Yundong Wang, Fangqin Cheng, Hong Li. Reduced power consumption in stirred vessel with high solid loading by equipping punched baffles[J]. 中国化学工程学报, 2023, 56(4): 203-214.
[4]	Hany M. Abd El-Lateef, Mai M. Khalaf, K. Shalabi, Antar A. Abdelhamid. Multicomponent synthesis and designing of tetrasubstituted imidazole compounds catalyzed via ionic-liquid for acid steel corrosion protection: Experimental exploration and theoretical calculations[J]. 中国化学工程学报, 2023, 55(3): 304-319.
[5]	Jihui Li, Bingjian Zhang, Yidan Shu. Simulation of gas-solid adsorption process considering particle-size distribution[J]. 中国化学工程学报, 2023, 54(2): 331-342.
[6]	Shidong Xue, Jingkun Han, Xi Xi, Junyi Zhao, Zhong Lan, Rongfu Wen, Xuehu Ma. Rapid velocity reduction and drift potential assessment of off-nozzle pesticide droplets[J]. 中国化学工程学报, 2022, 46(6): 243-254.
[7]	Xiang Wu, Yuzhou Hou, Kanjian Zhang, Ming Cheng. Dynamic optimization of 1,3-propanediol fermentation process: A switched dynamical system approach[J]. 中国化学工程学报, 2022, 44(4): 192-204.
[8]	Teng Wang, Zihong Xia, Caixia Chen. Computational study of bubble coalescence/break-up behaviors and bubble size distribution in a 3-D pressurized bubbling gas-solid fluidized bed of Geldart A particles[J]. 中国化学工程学报, 2022, 44(4): 485-496.
[9]	Tao Tian, Yayan Wang, Bing Liu, Zhaoyang Ding, Xinxi Xu, Meisheng Shi, Jun Ma, Yanjun Zhang, Donghui Zhang. Simulation and experiment of six-bed PSA process for air separation with rotating distribution valve[J]. 中国化学工程学报, 2022, 42(2): 329-337.
[10]	Wenhui Yang, Haoyu Yin, Zhihong Yuan, Bingzhen Chen. Flexibility analysis for continuous ibuprofen manufacturing processes[J]. 中国化学工程学报, 2022, 51(11): 115-125.
[11]	Yubai Liu, Zhiyuan Yu, Thomas Pelster, Ting-Tai Lee, Yujun Wang, Guangsheng Luo. Establishment of nucleation and growth model of silica nanostructured particles and comparison with experimental data[J]. 中国化学工程学报, 2022, 50(10): 379-388.
[12]	Danlei Chen, Yiqing Luo, Xigang Yuan. Refrigeration system synthesis based on de-redundant model by particle swarm optimization algorithm[J]. 中国化学工程学报, 2022, 50(10): 412-422.
[13]	Xianchao Liang, Limin He, Xiaoming Luo, Qingping Li, Yuanpeng You, Yiqiu Xu. Experimental study on sand particles accumulation, migration and separation efficiency in slug catcher[J]. 中国化学工程学报, 2021, 32(4): 134-143.
[14]	Shuaifeng Zhang, Qinghua Zhang, Jianzhuang Shang, Zaisha Mao, Chao Yang. Measurement methods of particle size distribution in emulsion polymerization[J]. 中国化学工程学报, 2021, 39(11): 1-15.
[15]	Ziqing Yuan, Ziyu Chen, Jianxin Mao, Renxian Zhou. The size effect and high activity of nanosized platinum supported catalysts for low temperature oxidation of volatile organic compounds[J]. 中国化学工程学报, 2021, 39(11): 135-143.