SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2022, Vol. 44 ›› Issue (4): 369-376.DOI: 10.1016/j.cjche.2021.03.046

• • 上一篇    下一篇

Preparation and properties of Ni-W-P-TiO2 nanocomposite coatings developed by a sol-enhanced electroplating method

Zhen He1, Yu Zhou1, Yuxin Wang1, Pingyi Guo1, Wensen Jiang2, Caizhen Yao1,3, Xin Shu4   

  1. 1 School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China;
    2 Cedars-Sinai Medical Center, Los Angeles, CA, USA;
    3 Laser Fusion Research Center, China Academy of Engineering Physics, Mianyang 621900, China;
    4 Hunan Aerospace TianLu Advanced Materials Testing Co. Ltd, Changsha 410299, China
  • 收稿日期:2020-11-03 修回日期:2020-12-24 出版日期:2022-04-28 发布日期:2022-06-18
  • 通讯作者: Yuxin Wang,E-mail:ywan943@163.com;Pingyi Guo,E-mail:pyguo@just.edu.cn
  • 基金资助:
    The research was funded by Natural Science Foundation of Jiangsu Province (BK20201008), Key Research and Development Project of Zhenjiang (GJ2020014), National Natural Science Foundation of China (51701087).

Preparation and properties of Ni-W-P-TiO2 nanocomposite coatings developed by a sol-enhanced electroplating method

Zhen He1, Yu Zhou1, Yuxin Wang1, Pingyi Guo1, Wensen Jiang2, Caizhen Yao1,3, Xin Shu4   

  1. 1 School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China;
    2 Cedars-Sinai Medical Center, Los Angeles, CA, USA;
    3 Laser Fusion Research Center, China Academy of Engineering Physics, Mianyang 621900, China;
    4 Hunan Aerospace TianLu Advanced Materials Testing Co. Ltd, Changsha 410299, China
  • Received:2020-11-03 Revised:2020-12-24 Online:2022-04-28 Published:2022-06-18
  • Contact: Yuxin Wang,E-mail:ywan943@163.com;Pingyi Guo,E-mail:pyguo@just.edu.cn
  • Supported by:
    The research was funded by Natural Science Foundation of Jiangsu Province (BK20201008), Key Research and Development Project of Zhenjiang (GJ2020014), National Natural Science Foundation of China (51701087).

摘要: Several Ni-W-P-TiO2 nanocomposite coatings were developed by the sol-enhanced electroplating method. The phase and elemental compositions of coatings were determined, and the surface and cross-section morphology were characterized. The mechanical and corrosion performance were systematically tested. The results revealed the addition of 5 ml·L-1 TiO2 sol caused a compact coating surface, while higher concentrations of TiO2 reduced the coating thickness and led to the inferior surface microstructure. The comparison in physiochemical properties of prepared coatings confirmed the superior performance of the Ni-W-P-TiO2 nanocomposite coating at 5 ml·L-1 TiO2 sol addition. Under this condition, the best mechanical properties were achieved when abrasive wear was the dominating wear-resistance mechanism, and the best corrosion resistance was obtained due to its smooth and compact surface microstructure.

关键词: Ni-W-P, TiO2, Electroplating, Mechanical property

Abstract: Several Ni-W-P-TiO2 nanocomposite coatings were developed by the sol-enhanced electroplating method. The phase and elemental compositions of coatings were determined, and the surface and cross-section morphology were characterized. The mechanical and corrosion performance were systematically tested. The results revealed the addition of 5 ml·L-1 TiO2 sol caused a compact coating surface, while higher concentrations of TiO2 reduced the coating thickness and led to the inferior surface microstructure. The comparison in physiochemical properties of prepared coatings confirmed the superior performance of the Ni-W-P-TiO2 nanocomposite coating at 5 ml·L-1 TiO2 sol addition. Under this condition, the best mechanical properties were achieved when abrasive wear was the dominating wear-resistance mechanism, and the best corrosion resistance was obtained due to its smooth and compact surface microstructure.

Key words: Ni-W-P, TiO2, Electroplating, Mechanical property